Topology optimization of composite hyperelastic material using SPIMFO-method

Meccanica - Fiber reinforced materials are used in assorted engineering application and for this reason, new additive manufacturing technologies have been developed for this type of materials. With...     

On the relation between protonium level shifts and nucleon-antinucleon scattering amplitudes

We study the Coulomb and threshold corrections to the low-energy scattering parameters for the proton-antiproton system, with numerical examples based on current optical models. Some commonly used expressions are shown to be inconsistent with our results. We check that the Trueman formula is valid for the level shifts of protonium, provided one takes properly into account the Coulomb corrections to the scattering lengths and volumes.     

Semicarbazones and thiosemicarbazones,XII: Crystal structure of salicylaldehyde semicarbazone

Summary The crystal and molecular structure of salicylaldehyde semicarbazone was obtained by single crystal X-ray diffraction. The O atom of the semicarbazone fragment isanti to the N atom of the hydrazinic group. The distribution of bond lengths in the semicarbazone fragment indicates delocalization of the -electrons. The crystal structure is stabilized by intra- and intermolecular hydrogen bonds.

---

Semicarbazone und Thiosemicarbazone, 12. Mitt.: Die Kristallstruktur des Salicylaldehyd-Semicarbazons

Zusammenfassung Die Kristallstruktur und die molekulare Struktur des Salicylaldehyd-Semicarbazons wurde über Einkristall-Röntgenstreuung ermittelt. Das O-Atom des Semicarbazonteils stehtanti zum N-Atom der Hydrazin-Gruppierung. Die Bindungslängen in der Semicarbazoneinheit zeigen eine Delokalisierung der -Elektronen an. Die Geometrie der Verbindung wird durch stabilisierende intra- und intermolekulare Wasserstoffbrückenbindungen bestimmt.

     

Enhanced photocatalytic activity of zeolite-encapsulated TiO2 clusters by complexation with organic additives and N-doping.

In the literature it was found that titanium oxide clusters of a few metal atoms encapsulated inside the micropores of zeolite Y exhibit large blue shifts in the Ti-O ligand-to-metal charge-transfer band as compared to non-encapsulated bulk titanium dioxide particles. This blue shift of the Ti-O absorption band is believed to have a negative effect on the photocatalytic activity of zeolite-encapsulated TiO2. We report here on circumventing this problem and increasing visible-light absorption by means of a red shift of the absorption band caused by addition of some organic molecular modifiers containing acidic OH groups that can strongly bind with titanol groups TiOH. In the studied series of zeolite-encapsulated TiO2 samples, the red shift of the optical spectrum follows the order: catechol > 4-aminobenzoic acid > benzoic acid. Also N-doping of zeolite-encapsulated TiO2 clusters by thermal treatment with urea leads to a red shift of the TiO2 absorption band that depends on the annealing and hydration conditions. By comparison to the degradation of phenol in aqueous solution, we have demonstrated that these changes in the absorption spectrum on addition of the organic modifier are also reflected in the photocatalytic activity of the samples; a greater increase in photocatalytic activity (about 30%) was observed for the additive catechol.     

Rheological behavior and structural interpretation of waxy crude oil gels

A waxy crude oil which gels below a threshold temperature has been investigated under static and dynamic conditions, using a combination of rheological methods, optical microscopy, and DSC. Particular attention is given in this work to the influence of the mechanical history on gel strength and to describing the time-dependent rheological behavior. The gels display a strong dependence of the yield stress and moduli on the shear history, cooling rate, and stress loading rate. Of particular interest is the partial recovery of the gel structure after application of small stress or strain (much smaller than the critical values needed for flow onset) during cooling, which can be used to reduce the ultimate strength of the crude oil gel formed below the pour point. A second focus of this study is to further develop the physical interpretation of the mechanism by which wax crystallization produces gelation. Gelation of the waxy crude oil studied is suggested to be the result of the association between wax crystals, which produces an extended network structure, and it is shown that the system displays features common to attractive colloidal gels, for one of which, fumed silica (Aerosil 200) in paraffin oil, rheological data are reported. The colloidal gel model provides a simple and economical basis for explaining the response of the gelled oil to various mechanical perturbations and constitutes a fruitful basis from which to develop technologies for controlling the gelation phenomenon, as suggested by the rheological results reported.     

Annihilation of ultra low energy antiprotons

The p interaction at ultra low energies is considered taking into account the Coulomb interaction. It is shown that Coulomb effects dramatically modify the usual behaviour of the annihilation cross section. A possibility to extract the scattering length from experimental data is discussed.     

Characterization of a peptide affinity support that binds selectively to staphylococcal enterotoxin B

The influences of mass transfer and adsorption-desorption kinetics on the binding of staphylococcal enterotoxin B (SEB) to an affinity resin with the peptide ligand, Tyr-Tyr-Trp-Leu-His-His (YYWLHH) have been studied. The bed and particle porosities, the axial dispersion coefficient and the pore diffusivity were measured using pulse experiments under unretained conditions. Adsorption isotherms for SEB on YYWLHH resins with peptide densities in the range from 6 to 220 micromol/g were measured and fitted to a bi-Langmuir equation. At peptide densities below 9 micromol/g and above 50 micromol/g, dissociation constants were lower (2 x 10(-3) to 7 x 10(-3) mol/m3), and binding capacities were larger (43-47 mg SEB/g). In the range from 9 to 50 micromol/g dissociation constants were larger (13 x 10(-3) to 24 x 10(-3) mol/m3) and capacities were lower (33-37 mg SEB/g). These observations are consistent with a transition from single point attachment of the protein to the ligand at low peptide densities to multipoint attachment at high peptide densities. The general rate (GR) model of chromatography was used to fit experimental breakthrough curves under retained conditions to determine the intrinsic rate constants for adsorption, which varied from 0.13 to 0.50 m3 mol(-1) s(-1), and exhibited no clear trend with increasing peptide density. An analysis of the number of transfer units for the various mass transfer steps in the column indicated that film mass transfer, pore diffusion (POR) and the kinetics of adsorption can all play an important role in the overall rate of adsorption, with the intrinsic adsorption step apparently being the rate determining step at peptide densities below 50 micromol/g.     

Characterization of the pores in hydrous ferric oxide aggregates formed by freezing and thawing

Hydrous ferric oxides (HFO) are efficient sorbents for inorganic and organic pollutants and therefore have great potentials in environmental science and engineering applications. Freezing and thawing of HFO suspensions leads to the formation of dense HFO aggregates. It facilitates the handling and increases the drying rate of HFO. In this study, we used a combination of pycnometry, gas adsorption (N(2) gas, water vapor), and small-angle neutron scattering (SANS) to characterize the porosity and pore size distribution of dense HFO aggregates formed by freezing dialyzed HFO suspensions at -25 degrees C and thawing them at room temperature. The crystallinity of the HFO, which was a 2-line ferrihydrite, was not affected by this treatment. Wet sieving and laser diffraction analysis showed that the dense HFO aggregates had a unimodal size distribution with an average diameter of 235+/-35 microm. Increasing the freezing rate by cooling with liquid N(2) (-196 degrees C) resulted in much smaller aggregates with an average diameter of 20 microm. Adding NaNO(3) electrolyte to the HFO suspensions prior to freezing also resulted in the formation of smaller aggregates. The dense HFO aggregates formed at -25 degrees C had a porosity of 0.73+/-0.02 ll(-1). SANS revealed a unimodal size distribution of pores, with an average pore diameter of 2.0 nm. The diameter of the HFO crystallites was estimated by transmission electron microscopy to be 1.9+/-0.5 nm. Geometrical considerations taking into account the unit particle and average pore size suggest that the crystallites retain 1-2 layers of hydration water during the coagulation induced by freezing. Analysis by N(2) gas adsorption showed that drying the dense HFO aggregates induced a reduction in porosity by about 25% and shifted the pore size distribution to smaller diameters. Rewetting during water vapor adsorption did not induce significant changes of the aggregate structure. The specific surface area of the dry HFO aggregates was between 320 and 380 m(2)g(-1).     

Computational studies of the 3-Dimensional structure of cyclopenta polycyclic aromatic hydrocarbons containing a gulf region

Recently, some cyclopenta-fused polyaromatic hydrocarbons, an environmentally relevant subclass of chemicals, have been shown to have carcinogenic activity in animals. It has been suggested that benz[l] aceanthrylene ( I ), an active member of this subclass with a gulf region, has a trans dihydrodiol metabolite that is nonplanar and has two distinct spatial configurations. We have used MMP 2(85) and AM 1 to investigate the three-dimensional structure of this dihydrodiol and other similar derivatives of ( I ) and have found that although ( I ) is somewhat nonplanar the relevant derivatives are all nearly planar. Further, we have computed potential functions for the bending of the angular ring in the gulf region using MMP 2(85), AM 1, and ab initio computed energies for AM 1 spatial configurations and find that these molecules all have only a single potential minimum. We have performed the same calculations for benzo[c]phenanthren and its 1,12 dimethyl derivative, molecules with a similar gulf region for which crystallographic data exists. In agreement with that data, we find that two distinct spatial configurations exist separated by significant barries. The differences between the results generated by the three different methods of computation will be discussed.