Low-phosporous nickel-coated carbon microcoils: Controlling microstructure through an electroless plating process

Carbon microcoils (CMCs) have been coated with a nickel-phosphorus (Ni-P) film using an electroless plating process, with sodium hypophosphite as a reducing agent in an alkaline bath. CMC composites have potential applications as microwave absorption materials. The morphology, elemental composition and phases in the coating layer of the CMCs and Ni-coated CMCs were investigated by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD), respectively. The effects of process parameters such as pH, temperature and coating time of the plating bath on the phosphorus content and deposition rate of the electroless Ni-P coating were studied. The results revealed that a continuous, uniform and low-phosphorous nickel coating was deposited on the surface of the CMCs for 20 min at pH 9.0, plating bath temperature 70 °C. The as-deposited coatings with approximately 4.5 wt.% phosphorus were found to consist of a mix of nano- and microcrystalline phases. The mean particle size of Ni-P nanoparticles on the outer surface of the CMCs was around 11.9 nm. The deposition rate was found to moderately increase with increasing pH, whereas, the phosphorous content of the deposit exhibited a significant decrease. Moreover, the material of the coating underwent a phase transition between an amorphous and a crystalline structure. The thickness of the deposit and the deposition rate may be controlled through careful variation of the coating time and plating bath temperature.     

Structure and dynamics of dense monolayers of no adsorbed on Rh(111) in equilibrium with the gas phase in the Torr pressure range

Using scanning tunneling microscopy, we show the phase transition between new structures of NO on Rh(111) in equilibrium with the gas phase near 300 K, in the Torr pressure range. Two phases with (2 x 2) and (3 x 3) periodicity transform into each other as the pressure and temperature change around the equilibrium P-T line. By measuring P and T at coexistence, we determined the heat of adsorption in the (3 x 3) structure. From the phase boundary dynamics, the activation energy barrier between phases were estimated. The results demonstrate that unique information can be obtained from high-pressure and high-temperature studies.     

Rogue waves in a multistable system

Clear evidence of rogue waves in a multistable system is revealed by experiments with an erbium-doped fiber laser driven by harmonic pump modulation. The mechanism for the rogue wave formation lies in the interplay of stochastic processes with multistable deterministic dynamics. Low-frequency noise applied to a diode pump current induces rare jumps to coexisting subharmonic states with high-amplitude pulses perceived as rogue waves. The probability of these events depends on the noise filtered frequency and grows up when the noise amplitude increases. The probability distribution of spike amplitudes confirms the rogue wave character of the observed phenomenon. The results of numerical simulations are in good agreement with experiments.     

Influences of organometallic polymer‐derived catalyst dispersion on SWNT growth

Catalyst formation kinetics of a ferrocene‐containing homopolymer, polyferrocenylethylmethylsilane (PFEMS), is investigated as it relates to the catalysis of single walled carbon nanotubes (SWNTs) through a chemical vapor deposition (CVD) process. The formation and efficiency of the PFEMS‐based iron catalyst is compared with that of the corresponding polystyrene (PS)‐b‐PFEMS diblock copolymer. The PFEMS homopolymer contains 23 wt % iron, while PS‐b‐PFEMS, with a 25 vol % PFEMS content, is only 6% iron. Despite its lower iron content, spin‐cast PS‐b‐PFEMS films on SiO₂/Si substrates produce more active iron sites than spin‐cast PFEMS films during CVD growth of SWNTs. This is related to the self‐assembly of the block copolymer, where PFEMS domains are well dispersed in the PS matrix, which degrades at a CVD temperature of 920 °C to leave catalytically active elemental iron behind. On the contrary, the pure PFEMS films contain a high percentage of iron and silicon, which tend to transform into ceramic‐coated iron at this high temperature, thus rendering the iron inactive towards SWNT growth. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 758–765, 2007     

Size-selected Ni catalyst islands for single-walled carbon nanotube arrays

Many properties of single-walled carbon nanotube (SWCNT) arrays are determined by the size and surface coverage of the metal catalyst islands from which they are nucleated. Methods using thermal fragmentation of continuous metal films frequently fail to produce size-uniform islands. Hybrid numerical simulations are used to propose a new approach to controlled self-assembly of Ni islands of the required size and surface coverage using tailored gas-phase generated nanocluster fluxes and adjusted surface temperatures. It is shown that a maximum surface coverage of 0.359 by 0.96–1.02 nm Ni catalyst islands can be achieved at a low surface temperature of 500 K. Optimized growth of Ni catalyst islands can lead to fabrication of size-uniform SWCNT arrays, suitable for numerous nanoelectronic applications. This approach is deterministic and is applicable to a range of nanoassemblies where high surface coverage and island size uniformity are required.

     

Oligomeric phthalonitriles and tetrakis(phenylethynyl)benzene blends with improved processing and thermal properties

Blended resins were prepared from the resorcinol-based PEEK-like oligomeric phthalonitrile resin (RES) and tetrakis(phenylethynyl)benzene (TPEB), a high char yield arylacetylene resin. Initial probing of curing properties using differential scanning calorimetry, indicated that TPEB and RES co-cure when heated. Characterization of thermal properties using thermogravimetric analysis indicated that a 1:1 TPEB-RES blend (by weight) exhibited a char yield of 80% which was 6% larger compared to pure RES (74%). According to FTIR characterization, the enhanced thermal properties of TPEB-RES were the result of increased crosslinking density. Rheological studies of TPEB, RES, and TPEB-RES blends indicated that blended systems exhibit similar processing characteristics as RES resin. For example, resins display ideal viscosities and relatively large processing windows when cured at 175 °C. Alternatively, pure TPEB resin exhibits low viscosities when melted, which are not suitable for preparing composite materials. This study indicates that preparing TPEB-RES blends is an effect strategy for improving thermal performance of potential RES composites while still maintaining the required processability for fabrication of dense polymer composites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2630–2640