Elevation of the glass transition temperature in flexible‐chain semicrystalline polymers

In the idealized two‐phase model of a semicrystalline polymer, the amorphous intercrystalline layers are considered to have the same properties as the fully‐amorphous polymer. In reality, these thin intercrystalline layers can be substantially influenced by the presence of the crystals, as individual polymer molecules traverse both crystalline and amorphous phases. In polymers with rigid backbone units, such as poly(etheretherketone), PEEK, previous work has shown this coupling to be particularly severe; the glass transition temperature (T_g) can be elevated by tens of degrees celsius, with the magnitude of the elevation correlating directly with the thinness of the amorphous layer. However, this connection has not been explored for flexible‐chain polymers, such as those formed from vinyl‐type monomers. Here, we examine T_g in both isotactic polystyrene (iPS) and syndiotactic polystyrene (sPS), crystallized under conditions that produce a range of amorphous layer thicknesses. T_g is indeed shown to be elevated relative to fully‐amorphous iPS and sPS, by an amount that correlates with the thinness of the amorphous layer; the magnitude of the effect is severalfold less than that in PEEK, consistent with the minimum lengths of polymer chain required to make a fold in the different cases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1198–1204, 2007     

Tuning the phase behavior of semicrystalline hydrogenated polynorbornene via epimerization

Hydrogenated polynorbornene (hPN) synthesized by ring‐opening metathesis polymerization (ROMP) exhibits a thermoreversible change in crystal polymorph at a temperature T _cc below its melting point, T _m. The polymorphic transition corresponds to a sharp increase in rotational disorder around the chain axis as the temperature is increased above T _cc. Saturation of ROMP polynorbornene (PN) to hPN can be achieved through both catalytic and noncatalytic approaches. Here, three different hydrogenation routes were employed on the same precursor polymer: catalytic routes over either supported Pd⁰ or a Ni/Al complex, and noncatalytic saturation with diimide. The different hydrogenation routes result in hPNs with varying degrees of epimerization of the cyclopentylene ring (from cis to trans); these epimerized units are included in the hPN crystals. The crystal structure of the rotationally ordered hPN polymorph, observed below T _cc, changes sharply at low levels of epimerization and then is weakly influenced by further increases in trans content. The stability of the rotationally ordered hPN polymorph decreases with increasing epimerization, as reflected in a reduction of T _cc from 134 °C to 92 °C at 22% epimerization. T _cc is less affected by epimerization than by the inclusion of a similar content of 5‐methylnorbornene units, reflecting the smaller size of the trans defect. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1188–1195     

Silicon nanowire grid polarizer for very deep ultraviolet fabricated from a shear-aligned diblock copolymer template

A silicon (Si) nanowire grid ultraviolet (UV) transmission polarizer has been fabricated, and its performance was measured over the visible to deep UV range. A cylinder-forming polystyrene-b-poly(hexylmethacrylate) diblock copolymer was coated onto an amorphous Si layer supported on a fused silica substrate, then shear aligned and employed as a mask for reactive-ion etching, resulting in a Si grid of 33 nm period and multi-centimeter-squared area. Due to the high plasma frequency and UV reflectance of the deposited Si, this nanowire grid was able to polarize light down into the deep UV, including 193 nm.     

Characterizing domain mixing effects in hydrogen bond-compatibilized polymer blends

The nature and extent of phase mixing in blends of hydroxyl-functionalized polystyrene and poly(ethyl acrylate) (PS/PEA), where the driving force for mixing is hydrogen bonding, are characterized by several techniques. Small-angle x-ray scattering (SAXS) shows a reduction in average domain size with increasing functionalization level, a result also evident from scanning electron microscopy (SEM). Together, the two techniques reveal a very broad distribution of domain sizes. At high functionalization levels, both SAXS and SEM indicate a high degree of “in-domain” mixing, with little or no pure PS or PEA remaining in the blends. Mathematical modeling of dynamic mechanical thermal analysis (DMTA) data is employed to quantify this progression. Initially, mixing is primarily interfacial, but as the functionalization level increases, the mixed interphase rapidly grows to occupy the entire material. In agreement with the SAXS and SEM results, DMTA modeling shows that further increases in the functionalization level suppress the amplitude of composition variations in the sample. The onset of extensive in-domain mixing coincides with the marked changes in stress-strain behavior observed previously in these materials. © 1994 John Wiley & Sons, Inc.     

DYNGA: a general purpose QM-MM-MD program. I. Application to water

We present a general purpose QM-MM-MD engine (DYNGA) designed to test alternative hybrid Hamiltonians geared towards the treatment of problems of interest in structural biology including the use of experimental data constraints. In this first presentation we use DYNGA to explore the behaviour of a traditional QM-MM approach in the treatment of the water—water interaction. We find the potential energy hypersurface for the water dimer computed with the HF 4–31G*/TIP3P hybrid Hamiltonian tends to be too flat. We also explore the effect of using traditional QM-MM techniques on proton wires and conclude there is a need for improvement, possibly addressed by using polarizable force fields.     

PAST AND FUTURE MANAGEMENT OF A COLLAPSED FISHERY: THE BAY OF BISCAY ANCHOVY

Abstract We analyze the efficiency of the international management of the Bay of Biscay anchovy. While a sharing agreement between France and Spain has been in place since 1992, the fish stock collapsed in 2005 and the fishery closed from 2005 to spring 2010. We consider differences in production technologies between both countries and calibrate our model using data from 1987 to 2009. Our results suggest two sources of rent dissipation under the existing sharing agreement: inefficient quota allocation and production inefficiencies due to inflexible national regulations. We discuss several alternatives to improve management.     

Controlling thermomechanical behavior of semicrystalline hydrogenated polynorbornene through the cis- to trans-cyclopentylene ratio

Though polynorbornene synthesized by ring-opening metathesis polymerization has an intrinsically all-cis configuration of the cyclopentylene backbone rings, a fraction of these rings can be epimerized to the trans configuration during hydrogenation over suitable catalysts. By varying the method of hydrogenation, semicrystalline hydrogenated polynorbornenes (hPNs) with trans levels between 0 and 36% were obtained. With increasing trans content, the glass transition temperature, melting point, and enthalpy of melting decrease modestly. By contrast, the temperature at which the hPN crystal transitions into a rotationally disordered polymorph varies strongly with trans content, ranging from 126 °C (all-cis) to 71 °C at 27% trans; at trans contents of 34% and above, no rotationally-ordered phase is observed at any temperature. The room-temperature Young's modulus shows no dependence on trans content, while the yield stress drops by 20% at 1% trans content and slowly decreases further with additional epimerization. The temperature dependence of the Young's modulus differs for trans-containing versus all-cis polymers, while the temperature dependence of the yield stress is set by the polymorph type (rotationally ordered vs. disordered).