Bis-salicylaldehyde-ethylenediamine as an analytical reagent

Summary Copper has been determined gravimetrically as its bis-salicylaldehyde-ethylenediamine complex of the composition C₁₆H₁₄O₂N₂ · Cu, dried at 100–120° C. The complex is completely precipitated in theph range of 10.5–13.5, adjusted with ammonia or caustic alkali. It is stable in presence of excess ammonia, 0.1 N alkali, ammonium salts and complexing agents as tartrate, citrate, sodium-thiosulphate, fluoride, thiourea, triethanolamine and EDTA. In presence of tartrate and ammonia the ions of alkali metals, alkaline earths, Ag⁺, Tl⁺, Tl³⁺, Pb²⁺, Cd²⁺, Co²⁺, Mn²⁺, Pd²⁺, Al³⁺, Cr³⁺, La³⁺, Ce³⁺, Au³⁺, Pt⁴⁺, Ti⁴⁺, Zr⁴⁺, Th⁴⁺, UO₂ ²⁺ and anions as VO₃ ^–, MoO₄ ^2–, WO₄ ^2–, CrO₄ ^2–, PO₄ ^3–, AsO₄ ^3– do not interfere. Ni²⁺ and Hg²⁺ are masked by tartrate, EDTA and ammonia; As³⁺, Sb³⁺ and Sn²⁺ are separated using fluoride as the complexing agent; at an alkalinity of 0.1 N caustic alkali in presence of tartrate As³⁺, Sb³⁺, Sn²⁺, Bi³⁺, Zn²⁺ and Fe³⁺ are separated. Fe³⁺ can also be separated using triethanolamine as the masking agent at aph of about 13.0. Copper can be separated from almost all the ions, thus affording a highly selective method for the determination of copper.

---

Zusammenfassung Es wird eine gravimetrische Methode zur Bestimmung von Kupfer beschrieben, die auf der Bildung des Bis-salicylaldehyd-äthylendiaminkomplexes beruht. Dieser hat die Zusammensetzung C₁₆H₁₄O₂N₂ · Cu. Die Fällung wird imph-Bereich 10,5–13,5 (mit Ammoniak oder Alkalilauge eingestellt) vorgenommen und der Niederschlag bei 100°–120° C getrocknet. Der Komplex ist beständig in Gegenwart von überschüssigem Ammoniak, 0,1 n Alkali, Ammoniumsalzen sowie Tartrat, Citrat, Natriumthiosulfat, Fluorid, Thioharnstoff, Triäthanolamin und ÄDTA. In Gegenwart von Tartrat und Ammoniak stören nicht: Alkalien, Erdalkalien, Ag⁺, Tl⁺, Tl³⁺, Pb²⁺, Cd²⁺, Co²⁺, Mn²⁺, Pd²⁺, Al³⁺, Cr³⁺, La³⁺, Ce³⁺, Au³⁺, Pt⁴⁺, Ti⁴⁺, Zr⁴⁺, Th⁴⁺, UO₂ ²⁺ sowie VO₃ ^–, MoO₄ ^2–, WO₄ ^2–, CrO₄ ^2–, PO₄ ^3– und AsO₄ ³⁺. Ni²⁺ und Hg²⁺ können mit Tartrat, ÄDTA und Ammoniak maskiert werden, As³⁺, Sb³⁺ und Sn²⁺ mit Fluorid. In 0,1 n ätzalkalischer Lösung in Gegenwart von Tartrat können As³⁺, Sb³⁺, Sn²⁺, Bi³⁺, Zn²⁺ und Fe³⁺ abgetrennt werden. Fe³⁺ kann ebenfalls mit Triäthanolamin beiph 13,0 maskiert werden. Das beschriebene Verfahren erlaubt somit eine Abtrennung des Kupfers von fast allen anderen Ionen.

---

---

Part I: Singh, B. R., and S. Kumar: Z. analyt. Chem. 185, 211 (1962).     

Condensed cyclic and bridged-ring systems : part 12: A novel synthetic route to 4-p-methoxyphenyl-bicyclo[ 2.2.2 ]octan-2-ones and some bicyclo [ 3.2.1 ] octane derivatives by acid-catalyzed intramolecula

The efficacy of a new acid-catalyzed intramolecular C-alkylation has been demonstrated by the synthesis of 1-methyl-4-$\text{p}$-methoxyphenylbicyclo [2.2.2] octan-2-one ($\text{5}$) and 4-$\text{p}$-methoxyphenylbicyclo [2.2.2] octan-2-one ($\text{6}$) from easily accessible starting materials. The carbinol $\text{20}$, derived from $\text{5}$, undergoes facile rearrangement leading to 1-$\text{p}$-methoxyphenyl-4-methyl bicyclo [3.2.1] oct-3-ene ($\text{22}$), which has been transformed to $\text{endo}$-1-$\text{p}$-methoxyphenyl-4-methylbicyclo [3.2.1] octan-3-one ($\text{25}$).     

Evidence of continuous evolution of smectic A2 from smectic Ad

Abstract

We present here precise measurements of the layer spacing for two compounds, viz. 4-n-heptyloxyphenyl-4′-(4″-cyanobenzoyloxy)benzoate and 4-n-undecyloxyphenyl-4′-(4″-cyanobenzyloxy)benzoate. Contrary to earlier reports our data do not show any jump in the layer spacing at the expected A_d-A₂ transition temperature, showing thereby that for both compounds A₂ evolves continuously from the A_d phase.     

Tuning the physical properties of a nematic liquid crystal elastomer actuator

In this report we demonstrate the ability to tune the physical properties of a liquid crystal elastomer (LCE) by varying the amount and type of crosslinking within the elastomer network. LCE films composed of a single mesogenic compound were capable of uniaxial contraction when thermally actuated through the nematic to isotropic phase of the material. We probed the physical properties of the LCE films while varying the amount and concentration of two crosslinking agents and measured actuation strains of 10–35%, elastic moduli of 3–14 MPa, and transition temperatures ranging between 75 and 60°C. The viscous losses of the elastomers and the estimated work capable of being produced by the films were also evaluated. The ability to tune the physical properties of the LCE films allows for a wide range of applications including robotics, microelectromechanical systems (MEMS), shape‐changing membranes, and/or microfluidics.     

Hydrogen production by steam reforming of glycerol over Ni/Ce/Cu hydroxyapatite-supported catalysts

Hydroxyapatite-supported Ni-Ce-Cu catalysts were synthesised and tested to study their potential for use in the steam reforming of glycerol to produce hydrogen. The catalysts were prepared by the deposition-precipitation method with variable nickel, cerium, and copper loadings. The performance of the catalysts was evaluated in terms of hydrogen yield at 600°C in a tubular fixed-bed microreactor. All catalysts were characterised by the BET surface area, XRD, TPR, TEM, and FE-SEM techniques. The reaction time was 240 min in a fixed-bed reactor at 600°C and atmospheric pressure with a water-to-glycerol feed molar ratio of 8: 1. It was found that the Ni-Ce-Cu (3 mass %-7.5 mass %-7.5 mass %) hydroxyapatite-supported catalyst afforded the highest hydrogen yield (57.5 %), with a glycerol conversion rate of 97.3 %. The results indicate that Ni/Ce/Cu/hydroxyapatite has great potential as a catalyst for hydrogen production by steam reforming of glycerol.     

Indium-doped ZnOas efficient photosensitive material for sunlight driven hydrogen generation and DSSC applications: integrated experimental and computational approach

Electricity generation using simple and cheap dye-sensitized solar cells and photocatalytic water splitting to produce future fuel, hydrogen, directly under natural sunlight fascinated the researchers worldwide. Herein, synthesis of indium-doped wurtzite ZnO nanostructures with varying molar percentage of indium from 0.25 to 3.0% with concomitant characterization indicating wurtzite structure is reported. The shift of (002) reflection plane to higher 2θ degree with increase in indium-doping thus is a clear evidence of doping of indium in zinc oxide nanoparticles. Surface morphological as well as microstructural studies of In@ZnO exhibited generation of ZnO nanoparticles and nanoplates of diameter 10–30 nm. The structures have been correlated well using computational density functional (DFT) studies. Diffuse reflectance spectroscopy depicted the extended absorbance of these materials in the visible region. Hence, the photocatalytic activity towards hydrogen generation from water under natural sunlight as well as efficient DSSC fabrication of these newly synthesized materials has been demonstrated. In-doped ZnO exhibited enhanced photocatalytic activity towards hydrogen evolution (2465 μmol/h/g) via water splitting under natural sunlight. DSSC fabricated using 2% In-doped ZnO exhibited an efficiency of 3.46% which is higher than other reported In-doped ZnO based DSSCs.

     

Solubility of Anthraquinone Derivatives in Supercritical Carbon Dioxide: New Correlations

Solubility of several anthraquinone derivatives in supercritical carbon dioxide was readily available in the literature, but correcting ability of the existing models was poor. Therefore, in this work, two new models have been developed for better correlation based on solid–liquid phase equilibria. The new model has five adjustable parameters correlating the solubility isotherms as a function of temperature. The accuracy of the proposed models was evaluated by correlating 25 binary systems. The proposed models observed provide the best overall correlations. The overall deviation between the experimental and the correlated results was less than 11.46% in averaged absolute relative deviation (AARD). Moreover, exiting solubility models were also evaluated for all the compounds for the comparison purpose.     

Bismuthiol II as an analytical reagent

Summary Silver can be separated as its Bismuthiol II complex from OsO_{4 4} ^2– , Os⁴⁺, Ir⁴⁺, Ru³⁺, Rh³⁺ with thiosulphate or complexone III as the masking agent at a p_H between 5 and 9. Au³⁺ can be kept in solution only by thiosulphate at a p_H 8–9 and cyanide complexes palladium at a P_H of about 6. Separation from platinum in presence of a mixture of tartaric acid and complexone III is possible only to a limited extent.Part VI see Z. analyt. Chem. 155, 86 (1957)