Effect of Niobium Modifications to PZT (53/47) Thin Films Made by a Sol-Gel Route

Niobium-modified lead zirconate titanate thin films (PNZT) with nominal compositions, Pb_(1–0.5x) (Zr_0.53 Ti_0.47)_1–x Nb _x O₃:x = 0.02–0.07, have been prepared using a diol based sol-gel route. Single-layer (0.5 m) films were fabricated on platinised silicon substrates by spin-coating. The effect of niobium additions with regard to phase development, microstructure, and ferroelectric and dielectric properties were investigated for different annealing temperatures. For comparison, unmodified PZT films were also prepared. Niobium substitution increased the crystallisation temperatures for perovskite PNZT phase formation. The values of remanent polarisation P _r and dielectric constant _r were found to decrease with the introduction of Nb. For example, in films heated at 700°C for 15 min, the P _r value of an unmodified PZT film was 31 C cm^–2, compared to 17 C cm^–2 for an x = 0.05 PNZT film, whilst respective relative permittivity values fell from 1190 to 600. The highest Nb concentration film, x = 0.07, did not display any switchable polarisation characteristics, which is consistent with high levels of intermediate pyrochlore phase.     

High‐efficiency polymer solar cells based on phenylenevinylene copolymer with BF2‐azopyrrole complex and CN‐PC70BM with solvent additive

Power conversion efficiency (PCE) of phenylenevinylene‐based copolymer with BF₂ azopyrrole complex (PB)/modified PC₇₀BM, that is, CN‐PC₇₀BM bulk heterojunction solar cells improves from 2.16 to 4.90% using a processing additive and drying condition. The results demonstrate that a processing additive and drying condition provides an effective means to control both the surface roughness and finer interpenetrating networks to enhance the exciton dissociation into free charge carriers, charge transportation, and collection. Taking into the account of simple device fabrication process without thermal annealing, the PCE of the polymer solar cell can further improved by chloronapthalene (CN) additive under the fast drying condition. The average carrier lifetimes extracted from the impedance spectra and found to correlate with measured PCEs. At short circuit conditions and illumination, the average charge carrier lifetime was found vary from 16.8 to 32 μs with power conversion efficiencies ranging from 3.0 to 4.9%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis of nanoplate bismuth oxychloride—a visible light active material

We have synthesized bismuth oxychloride (BiOCl) by wet chemical route. Characterization of the synthesized samples has been carried out using XRD, SEM with EDAX, HRTEM, FT-IR, Raman Spectroscopy, PL and UV. XRD and SEM analysis confirms crystallite size varying from 20–40 nm. FTIR spectrum indicates that the prepared material is highly pure and there is no water molecule present. Raman and photoluminescence spectrum of the bismuth oxychloridenanoplate demonstrated strong blue light emission which brings them in a special class of materials which work under visible light exposure. UV-Vis spectroscopy shows very less charge carriers transit time under visible light thus confirming excellent photocatalytic properties of material.     

Profiling primaquine metabolites in primary human hepatocytes using UHPLC‐QTOF‐MS with 13C stable isotope labeling

Therapeutic efficiency and hemolytic toxicity of primaquine (PQ), the only drug available for radical cure of relapsing vivax malaria are believed to be mediated by its metabolites. However, identification of these metabolites has remained a major challenge apparently due to low quantities and their reactive nature. Drug candidates labeled with stable isotopes afford convenient tools for tracking drug‐derived metabolites in complex matrices by liquid chromatography‐tandem mass spectrometry (LC‐MS‐MS) and filtering for masses with twin peaks attributable to the label. This study was undertaken to identify metabolites of PQ from an in vitro incubation of a 1:1 w/w mixture of ¹³C₆‐PQ/PQ with primary human hepatocytes. Acquity ultra‐performance LC (UHPLC) was integrated with QTOF‐MS to combine the efficiency of separation with high sensitivity, selectivity of detection and accurate mass determination. UHPLC retention time, twin mass peaks with difference of 6 (originating from ¹³C₆‐PQ/PQ), and MS‐MS fragmentation pattern were used for phenotyping. Besides carboxy‐PQ (cPQ), formed by oxidative deamination of PQ to an aldehyde and subsequent oxidation, several other metabolites were identified: including PQ alcohol, predictably generated by oxidative deamination of PQ to an aldehyde and subsequent reduction, its acetate and the alcohol's glucuronide conjugate. Trace amounts of quinone‐imine metabolites of PQ and cPQ were also detected which may be generated by hydroxylation of the PQ/cPQ quinoline ring at the 5‐position and subsequent oxidation. These findings shed additional light on the human hepatic metabolism of PQ, and the method can be applied for identification of reactive PQ metabolites generated in vivo in preclinical and clinical studies. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterization of <Emphasis Type="Italic">Pf</Emphasis>TrxR inhibitors using antimalarial assays and <Emphasis Type="Italic">in silico</Emphasis>techniques

Background

The compounds 1,4-napthoquinone (1,4-NQ), bis-(2,4-dinitrophenyl)sulfide (2,4-DNPS), 4-nitrobenzothiadiazole (4-NBT), 3-dimethylaminopropiophenone (3-DAP) and menadione (MD) were tested for antimalarial activity against both chloroquine (CQ)-sensitive (D6) and chloroquine (CQ)-resistant (W2) strains of Plasmodium falciparum through an in vitro assay and also for analysis of non-covalent interactions with P. falciparum thioredoxin reductase (PfTrxR) through in silico docking studies.

Results

The inhibitors of PfTrxR namely, 1,4-NQ, 4-NBT and MD displayed significant antimalarial activity with IC₅₀ values of?<?20 μM and toxicity against 3T3 cell line. 2,4-DNPS was only moderately active. In silico docking analysis of these compounds with PfTrxR revealed that 2,4-DNPS, 4-NBT and MD interact non-covalently with the intersubunit region of the enzyme.

Conclusions

In this study, tools for the identification of PfTrxR inhibitors using phenotyphic screening and docking studies have been validated for their potential use for antimalarial drug discovery project.

Open image in new window

     

Theoretical studies on the conformations of selenamides

Ab initio HF/6-31+G*, MP2/6-31+G*, B3LYP/6-31+G* level calculations have been performed on HSe-NH₂ to estimate the Se-N rotational barriers and N-inversion barriers. Two conformers have been found withsyn andanti arrangement of the NH₂ hydrogens with respect to Se-H bond. The N inversion barriers in selenamide are 1.65, 2.47, 1.93 kcal/mol and the Se-N rotational barriers are 6.58, 6.56 and 6.12 kcal/mol respectively at HF/6-31+G*, MP2/6-31+G* and B3LYP/6-31+G* levels respectively. The n_N →Σ *_Se-H negative hyperconjugation is found to be responsible for the higher rotational barriers.     

Tuning the Composition of Guest Molecules in Clathrate Hydrates: NMR Identification and Its Significance to Gas Storage

Gas hydrates represent an attractive way of storing large quantities of gas such as methane and carbon dioxide, although to date there has been little effort to optimize the storage capacity and to understand the trade‐offs between storage conditions and storage capacity. In this work, we present estimates for gas storage based on the ideal structures, and show how these must be modified given the little data available on hydrate composition. We then examine the hypothesis based on solid‐solution theory for clathrate hydrates as to how storage capacity may be improved for structure II hydrates, and test the hypothesis for a structure II hydrate of THF and methane, paying special attention to the synthetic approach used. Phase equilibrium data are used to map the region of stability of the double hydrate in P–T space as a function of the concentration of THF. In situ high‐pressure NMR experiments were used to measure the kinetics of reaction between frozen THF solutions and methane gas, and ¹³C MAS NMR experiments were used to measure the distribution of the guests over the cage sites. As known from previous work, at high concentrations of THF, methane only occupies the small cages in structure II hydrate, and in accordance with the hypothesis posed, we confirm that methane can be introduced into the large cage of structure II hydrate by lowering the concentration of THF to below 1.0 mol %. We note that in some preparations the cage occupancies appear to fluctuate with time and are not necessarily homogeneous over the sample. Although the tuning mechanism is generally valid, the composition and homogeneity of the product vary with the details of the synthetic procedure. The best results, those obtained from the gas–liquid reaction, are in good agreement with thermodynamic predictions; those obtained for the gas–solid reaction do not agree nearly as well.     

Cascade Mi (i = 1–5) subshell X‐ray emission at incident photon energies across the Lj (j = 1–3) subshell absorption edges of 66Dy

The total M shell and the M_k (k = ξ, αβ, γ, m) X‐ray production cross sections for ₆₆Dy have been measured at incident photon energies across its L_j (j = 1–3) subshell absorption edge energies, ranging 7.8–9.2 keV. This study aims to investigate the evolution of the probability for cascade decay of L_j subshell vacancies as the tunable incident energy ionizes progressively different ₆₆Dy L_j subshells. The experimental X‐ray production cross sections have been compared with theoretical ones calculated using the nonrelativistic Hartree–Fock–Slater (HFS) model‐based photoionization cross sections; three sets of the X‐ray emission rates, fluorescence and Coster–Kronig yield based on the nonrelativistic Hartree–Slater (NRHS) model, Dirac–Hartree–Slater (DHS) model and Dirac–Fock (DF) model; the L_j (j = 1–3) subshell to the M_i (i = 1–5) subshell vacancy transfer probabilities evaluated in the present work. Presently measured total M shell and the M_αβ X‐ray production cross sections are found to be significantly lower than the theoretical ones evaluated using physical parameters based on the relativistic Dirac–Fock/Dirac–Hartree–Slater model calculations, whereas a much better agreement is observed with respect to the NRHS model‐based calculations; however, the measured X‐ray production cross sections are still systematically lower than the NRHS values.     

Evaluation of antidiabetic and antioxidant potential of lupeol in experimental hyperglycaemia

Oxidative stress, produced under diabetic conditions, is a possible cause of various forms of tissue damage. The concentrations of antioxidant enzymes in cases of diabetes are significantly decreased, with a concomitant increase in lipid peroxidation. In this study, lupeol, a phytoconstituent from Solanum xanthocarpum, is shown to suppress the progression of diabetes after 21 days. Lupeol treatment caused decreases in glycated haemoglobin, serum glucose and nitric oxide, with a concomitant increase in serum insulin level. Furthermore, treatment with lupeol also increased antioxidant levels, with a decrease in the level of thiobarbituric acid-reactive oxygen species.