Ring conserved isodesmic reactions: A new method for estimating the heats of formation of aromatics and PAHs

Density functional theory (DFT) has been used along with isodesmic reaction schemes to estimate heats of formation for aromatics and polynuclear aromatic hydrocarbons (PAHs). Calculations have been performed for 42 molecules, 12 of which have uncertain or unknown experimental values, using the B3-LYP functional with the small 6-31G(d) basis set. Heats of formation for the group of test molecules were estimated using both conventional bond separation (BS) isodesmic reactions as well as a new technique of ring conserved (RC) isodesmic reactions which is able to correct systematic errors in B3-LYP calculations. When a ring conserved isodesmic reaction based on delocalization energies is used, the estimated heat of formation is more accurate than that obtained by the bond separation technique. The methodology for creating and using appropriate ring conserved isodesmic reactions is discussed. The present scheme also compares favorably against a recently developed bond centered group additivity scheme that was tested against a large number of PAH molecules.     

PAMAM Dendrimers as Anchors for the Preparation of Electrocatalytically Active Ultrathin Metallic Films

This paper describes the formation of catalytically active thin films of Pt, Pt/Au, and Pt/Ru on gold substrates stabilized by amine‐terminated polyamidoamine (PAMAM) dendrimers. A monolayer of dendrimer is initially self‐assembled on the gold substrate, which serves as a template for the growth of catalytically active thin films. As dendrimers contain tens to hundreds of functional groups at the periphery, the aggregate strength of the multidentate interactions with the gold substrate leads to the formation of robust films. The films were found to exhibit high catalytic activity for the oxidation of small hydrocarbons such as methanol. Such films offer versatility and scope for the design of effective electrocatalysts, especially in the context of microfuel cells and “dendrichips”; hence, they could find applications in the fields of sensors, fuel cells, and waste‐water treatment.     

Supramolecular porphyrin-fullerene via 'two-point' binding strategy: axial-coordination and cation-crown ether complexation

A highly stable porphyrin-fullerene conjugate with defined distance and orientation, was formed using a newly developed 'two-point' binding strategy involving axial-coordination and cation-crown ether complexation; photochemical studies performed in benzonitrile revealed efficient charge separation and slow charge-recombination in the supramolecular complex.     

Effect of axial ligation or pi-pi-type interactions on photochemical charge stabilization in "two-point" bound supramolecular porphyrin-fullerene conjugates

Two types of structurally well-defined, self-assembled zinc porphyrin-fullerene conjugates were formed by "two-point" binding strategies to probe the effect of axial ligation or pi-pi-type interactions on the photochemical charge stabilization in the supramolecular dyads. To achieve this, meso-tetraphenylporphyrin was functionalized to possess one or four [18]crown-6 moieties at different locations on the porphyrin macrocycle while fullerene was functionalized to possess an alkyl ammonium cation, and a pyridine or phenyl entities. As a result of the crown ether-ammonium cation complexation, and zinc-pyridine coordination or pi-pi-type interactions, stable zinc porphyrin-fullerene conjugates with defined distance and orientation were formed. Evidence for the zinc-pyridine complexation or pi-pi-type interactions was obtained from the spectral and computational studies. Steady-state and time-resolved emission studies revealed efficient quenching of the zinc-porphyrin singlet excited state in these dyads, and the measured rates of charge separation, k(CS) were found to be slightly better in the case of the dyads held by axial coordination and crown ether-cation complexation. Nanosecond transient absorption studies provided evidence for the electron transfer reactions, and these studies also revealed charge stabilization in these dyads. The lifetimes of the radical ion pairs were found to depend upon the type of porphyrins utilized to form the dyads, that is, porphyrin possessing the crown ether moiety at the ortho position of one of the phenyl rings yielded prolonged charge stabilized states. Addition of pyridine to the supramolecular dyads eliminated the zinc-pyridine coordination or pi-pi-type interactions of the "two-point" bound systems due to the formation of a new zinc-pyridine axial bond thus giving a unique opportunity to probe the effect of axial coordination or pi-pi interactions on k(CS) and k(CR). Under these conditions, the measured electron transfer rates revealed faster k(CS) and slower k(CR) as compared to those obtained in the absence of added pyridine. The evaluated lifetimes of the radical ion-pairs were found to be hundreds of nanoseconds and were longer in the presence of pyridine.     

Determination of affinity constants and response factors of the noncovalent dimer of gramicidin by electrospray ionization mass spectrometry and mathematical modeling

The dimerization of gramicidin, a 15-residue membrane peptide, in solution can be viewed as a model for protein-protein interactions. We reported previously that the dimer can be observed when electrosprayed from organic solvents and that the abundances of the dimer depends on the dielectric constant of the solvent. Here, we report an effort to determine an affinity constant for the dimerization of gramicidin by using gas-phase abundance. Two issues affecting the determination are the electrospray-induced dissociation of the dimer and discrimination in the electrospray of the dimer compared with the monomer. Other methods developed for the purpose of determining affinity from mass spectral abundance do not address the dissociation of the complex in the gas phase or can not be applied for cases of low affinity constant, K(a). We present a mathematical model that uses the ratio of the signal intensities of the dimer and the monomer during a titration. The model also incorporates the dissociation and an electrospray ionization-response factor of the dimer for extracting the affinity constant for the dimerization of gramicidin. The dimerization constants from the new method agree within a factor of two with values reported in the literature.     

Complexes of a new series of α-diimine macrocycles,I: Template synthesis of cadmium(II) complexes of tetraazamacrocycles derived from 2,3-butanedione or benzil

Summary Cadmium(II) complexes of the type [CdL] (NO₃)₂ (whereL = tetraazamacrocycle with a 12 to 32-membered ring) have been synthesized by the reactions of 2,3-butanedione or benzil with different aliphatic diamines viz. ethylenediamine, 1,3-diaminopropane, 1,4-diaminobutane, 1,6-diaminohexane, 1,8-diaminooctane and 1,12-diaminododecane in the presence of Cd(II) as template. These complexes have been characterized by elemental analyses, conductivity measurements and IR and NMR spectral studies.

---

Komplexe einer neuen Serie von -Diimin-Macrocyclen, 1. Mitt.: Synthese von Cadmium(II)-Komplexen von Tetraazamacrocyclen aus 2,3-Butandion oder Benzil

Zusammenfassung Es wurden Cadmium(II)-Komplexe des Typs [CdL] (NO₃)₂ (wobeiL einen 12-bis 32-gliedrigen Tetraazamacrocyclus darstellt) mittels der Reaktion von 2,3-Butandion oder Benzil mit verschiedenen aliphatischen Diaminen (Ethylendiamin, 1,3-Diaminopropan, 1,4-Diaminobutan, 1,6-Diaminohexan, 1,8-Diaminooctan und 1,12-Diaminododecan) hergestellt. Die Komplexe wurden mittels Elementaranalyse, Leitfähigkeitsmessungen und Infrarot- bzw. Kernresonanzspektroskopie charakterisiert.

     

Aromatic polyethers,polysulfones, and polyketones as laminating resins. IV. Polymers with p-cyclophane units for crosslinking

1,3-Bis(p-phenoxybenzenesulfonyl)benzene, 4,4′-bis(p-phenoxybenzenesulfonyl)diphenyl ether, and 4,4′-diphenoxydiphenyl sulfone were polymerized with isophthaloyl or terephthaloyl chlorides in Friedel-Crafts type polymerizations. These polymers had [2,2]p-cyclophane units in the backbone, introduced by employing 3,9-bis(p-phenoxybenzoyl) [2.2]p-cyclophane as part of the polyaryl ether component. Thermolysis of the dimethylene bridge of the [2.2]p-cyclophane monomer produced diradicals which combined across polymer chains to provide crosslinks. p-Cyclophane polymers with 1,3-bis-(p-phenoxybenzenesulfonyl)benzene showed potential as high performance, thermally stable laminating resins.     

An organocatalytic enantioselective synthesis of (+)-duryne

An efficient enantioselective synthesis of the potent anticancer agent (+)-duryne was achieved by the use of a one-pot organocatalyzed hydroxylation/Ohira–Bestmann and Grubbs cross-metathesis/selective cis-Wittig reaction. This new approach is envisioned to facilitate the synthesis of every representative member of the family.     

Sensitive and selective spectrophotometric methods for the determination of pheniramine maleate in bulk drug and in its formulations using sodium hypochlorite

Two simple, selective and sensitive spectrophotometric methods are described for the determination of pheniramine maleate (PAM) in pure and dosage forms. The method is based on the reaction of PAM with hypochlorite in the presence of Kolthoff buffer (phosphate-borate) of pH 7.0 to form the chloro derivative of PAM, destruction of the excess hypochlorite by nitrite ion (the chloro derivative of drug is unaffected under the optimized conditions) followed by the oxidation of iodide with the chloro derivative of PAM to iodine (I ₃ ^? which is either measured directly at 355 (method A) or reacted with starch to form a blue chromogen measurable at 590 nm (method B). The optimum conditions that affect the reaction were ascertained, and under these conditions linear relationship was obtained in the concentration ranges of 2–50 and 1–25 μg/mL PAM in methods A and B, respectively. The calculated molar absorptivity values are 7.26 × 10³ and 1.28 × 10⁴ L/(mol cm) for method A and method B, respectively. Sandell’s sensitivity values, limits of detection (LOD) and quantification (LOQ) are calculated as per ICH guidelines. The proposed methods were applied successfully to the determination of PAM in tablets and injection with good accuracy and precision and without interferences from common additives. The results obtained by the proposed methods were compared favourably with those of the reference method. The accuracy and reliability of the proposed methods were further checked by recovery studies via standard addition procedure.