杂多酸催化合成乙酸乙酯

回流吸附法制备的负载型12-钨磷酸(HPW/C)是合成乙酸乙酯的高效催化剂。最佳反应条件下乙醇转化率达96％,酯化选择性100％。催化剂的高活性是由于HPW在活性炭上高度分散,使活性位增多,有效酸量增大。HPW/C还具有热稳定性高和不易流失等优点。     

Tokamak Experiment and Tokamak Engineering——Development of the Plasma Diagnostics on HL-2A Tokamak

The main mission the HL-2A tokamak is of the experiments on to explore the divertor physics and to investigate the plasma confinement, transport and instabilities with high power auxiliary heating and advanced fuelling, it is necessary to develop more new diagnostics and increase the spatial and temporal resolutions of the measurements for exist system. Up to now, about 30 diagnostic systems have been moved from HL-1M to HL-2A tokamak. Other 10 diagnostic systems are being designed and installed on the device. In developed in last 2 years, will be presented.     

面向化妆品产业升级的江南大学应用化学专业建设思考与实践

Based on the development prospect of cosmetics industry, the advantage of light industry characteristic and the foundation of applied chemistry in Jiangnan University, a systematic upgrading of applied chemistry was carried out through "emerging engineering education (3E)" project "upgrade and practice of chemistry-related majors of local and/or trade university responding to the social developments" supported by the Ministry of Education. On the basis of investigation and analysis, the orientation and training goal of applied chemistry were updated first, and then the curriculum system was determined and the curriculum construction is strengthened, so as to achieve more distinctive characteristics, more solid foundation and more comprehensive quality. In view of the new requirements of the 3E for talent training, some practices have been formed in the aspects of multi-disciplinary integration, multi-angle coordination and close integration to industry. Contributing the development of cosmetics industry and seizing the commanding point of science and technology from the perspective of talent training, will play a unique role in human social progress.     

Incorporating zosteric acid into silicone coatings to achieve its slow release while reducing fresh water bacterial attachment

Biofouling has posed serious problems in maritime industry including increased fuel consumptions, economic loss from ship-hull maintenances, contamination of drinking water, and serious corrosion for mechanical instruments. Minimizing the attachment of bacteria and formation of biofilm could be advantageous in reducing the early stages of biofouling. Zosteric acid, a natural product present in eelgrass, was found to have ability for preventing the attachment of some bacteria and barnacles. In this study, the antifouling ability of zosteric acid during the early stages of fouling was evaluated using attachment studies of fresh water bacteria. Simultaneously, various methods were sought for incorporating zosteric acid into silicone to prolong the release of the compound. The main results from this study were that zosteric acid exhibited anti-bacterial attachment regardless of whether it dispersed in water or incorporated into a coating. In addition, the release rate of zosteric acid from the incorporated coatings, particularly those where zosteric acid was uniformly dispersed with aggregates size of 4 microm or less, was orders of magnitude slower than those of previous reports. The release results indicate that the service life of our coatings could be far extended even with a small amount of zosteric acid incorporated.     

Turbulence modelling and role of compressibility on oil spilling from a damaged double hull tank

The viscosity plays an important role, and a multiphase solver is necessary to numerically simulate the oil spilling from a damaged double hull tank (DHT). However, it is uncertain whether turbulence modelling is necessary, which turbulence model is suitable; and what the role of compressibility of the fluids is. This paper presents experimental and numerical investigations to address these issues for various cases representing different scenarios of the oil spilling, including grounding and collision. In the numerical investigations, various approaches to model the turbulence, including the large eddy simulation (LES), direct numerical simulation and the Reynolds average Navier–Stokes equation (RANS) with different turbulence models, are employed. Based on the investigations, it is suggested that the effective Reynolds numbers corresponding to both oil outflow and water inflow shall be considered when classifying the significance of the turbulence and selecting the appropriate turbulence models. This is confirmed by new lab tests considering the axial offset between the internal and the external holes on two hulls of the DHT. The investigations conclude for numerically simulating oil spilling from a damaged DHT that when the effective Re is smaller the RANS approaches should not be used and LES modelling should be employed; while when the effective Reynolds numbers is large, the RANS models may be used as they can give similar results to LES in terms of the height of the mixture in the ballast tank and discharge but costing much less CPU time. The investigation on the role of the compressibility of the fluid reveals that the compressibility of the fluid may be considerable in a small temporal‐spatial scale but plays an insignificant role on macroscopic process of the oil spilling. Copyright © 2016 John Wiley & Sons, Ltd.     

High-efficiency α-benzoyloxylation and hydroxylation of β-keto amides by phase transfer catalysis

A facile and efficient protocol for α-benzoyloxylation and α-hydroxylation of β-keto amides by phase-transfer catalysis is presented. This methodology provides mild and practical access to a variety ofα-oxygenated β-keto amides. Furthermore, α-benzoyloxylation products can be easily converted into α-hydroxylation compounds, which are useful synthetic precursors of biological targets.     

A general approach to arylated furans,pyrroles, and thiophenes

A general and practical synthetic method for aryl-substituted five-membered heterocycles has been developed. In the presence of KOH (30%), 1,4-diaryl-1,3-butadiynes undergo the cyclocondensation reaction with water, primary amines, and Na₂S·9H₂O in DMSO at 80 °C to afford 2,5-diarylfurans, 1,2,5-trisubstituted pyrroles, and 2,5-diarylthiophenes in good to high yields. Further studies have disclosed that aryl-substituted five-membered heterocycles can be also synthesized by a one-pot, two-step strategy from the terminal alkynes in DMSO firstly catalyzed by CuCl, and then via addition of KOH to promote the cyclocondensation of 1,3-butadiynes generated in situ.     

Theoretical and experimental studies on a compact stretcher with large spectral bandwidth and high transmission efficiency

To ensure safe and effective amplification for the chirped pulse amplification laser facility, many factors such as pulse spectral width, pulse duration, grating parameters and incidence angle parameter are considered carefully in the design of the pulse stretcher. A compact four pass Offner stretcher design is given out. Experiment results show that the stretcher has broad spectral width, large stretching ratio and high transmission efficiency. By comparison, the calculated result of the dispersion effect on the pulse duration is completely consistent with the experiment result.     

Immobilized palladium on surface-modified Fe3O4/SiO2 nanoparticles: as a magnetically separable and stable recyclable high-performance catalyst for Suzuki and Heck cross-coupling reactions

A palladium-based catalyst (Fe₃O₄/SiO₂/HPG–OPPh₂–PNP) supported on chlorodiphenylphosphine-functionalized magnetic nanoparticles was successfully prepared from Fe₃O₄/SiO₂ with sequential attachment of glycerol and chlorodiphenylphosphine, followed by treatment of an ethanolic solution of palladium chloride with hydrazine. The as-prepared catalyst was characterized by ICP-AES, FTIR, XRD, SEM, and TEM. The Fe₃O₄/SiO₂/HPG–OPPh₂–PNP was found as a magnetically separable and highly active catalyst for Suzuki coupling reactions of aryl iodides, bromides, and chlorides as well as Heck reactions of aryl iodides and bromides. Under appropriate conditions, all reactions afforded the desired products in moderate to excellent yields. Moreover, this catalyst can be easily recovered by using a magnetic field and directly reused for at least six cycles without significant loss of its activity.     

One-Pot Etherification of Ketones and Aldehydes with Organic Halides Using Sodium Hydride as a Reductant

One-pot etherification reaction of aromatic and some aliphatic carbonyl compounds with organic halides in the presence of sodium hydride as a reducing reagent proceeded smoothly in dioxane, a polar solvent with higher boiling point, to provide desired ethers in moderate to high yields.