Dehydrochlorination of monodisperse poly(vinylidene chloride) latex

The objective of the work described in this paper was to produce dispersions of small spherical carbon particles, having particle diameters in the region of 0.1 μm. To this end, the dehydrochlorination of poly(vinylidene chloride) (PVDC) latex particles was attempted. The PVDC latex was prepared by a dispersion polymerization route. Both chemical and thermal dehydrochlorination routes were attempted. Chemical dehydrochlorination, using a variety of base/solvent systems, led to nonporous, spherical black particles of the required size, but which contained only 60% carbon; most of the remainder was oxygen, introduced by nucleophilic substitution reactions. Thermal dehydrochlorination, at 700°C under a nitrogen atmosphere, using a fluidized bed arrangement, on the other hand, led to black particles, having 90% carbon and which retained their sphericity, but which were highly porous. Initial chemical dehydrochlorination, prior to thermal treatment, did not seem to reduce the porosity of the final carbons. Dispersions of the carbon particles in a variety of solvents were readily achieved.     

Determination of geosmin and 2-methylisoborneol in water using solid-phase microextraction and gas chromatography-chemical ionisation/electron impact ionisation-ion-trap mass spectrometry

A method for the determination of geosmin and 2-methylisoborneol (MIB) in water by solid-phase microextraction (SPME) is presented. Various SPME fibre chemistries have been compared for their efficiency in extracting MIB from water. Extraction conditions including the extraction time and temperature have been optimised. A 30 ml water sample is extracted for 20 min at 60 degrees C using a divinylbenzene fibre, and the extract analysed by gas chromatography with ion-trap mass spectrometry detection. d5-Geosmin and d3-MIB are added as internal standards to compensate for any variability in the SPME process which is not carried out to equilibrium. Chemical ionisation, using acetonitrile as the reagent gas, was found to give superior sensitivity to electron impact ionisation (EI) for the detection of MIB. EI was used as the ionisation mode for detection of geosmin. The method shows good linearity over the concentration range 5-40 ng l-1 and gives detection limits of 1 ng l-1 for both geosmin and MIB. Recovery (93-110%) and precision (3-12%) over this concentration range, for both raw and treated drinking waters, are comparable to currently employed methods such as closed-loop stripping analysis (CLSA). The method offers the advantage of being simple to use, with much shorter analysis times in comparison to CLSA.     

Activated carbon oxygen content influence on water and surfactant adsorption

This research investigates the adsorption properties of three activated carbons (AC) derived from coconut, coal, and wood origin. Each carbon demonstrates different levels of resistance to 2 M NaOH treatment. The coconut AC offers the greatest and wood AC the least resistance. The influence of base treatment is mapped in terms of its effects on specific surface area, micropore volume, water adsorption, and dodecanoic acid adsorption from both water and 2 M NaOH solution. A linear relationship exists between the number of water molecules adsorbed at the B-point of the water adsorption isotherm and the oxygen content determined from elemental analysis. Surfactant adsorption isotherms from water and 2 M NaOH indicate that the AC oxygen content effects a greater dependence on affinity for surfactant than specific surface area and micropore volume. We show a linear relationship between the plateau amount of surfactant adsorbed and the AC oxygen content in both water and NaOH phases. The higher the AC oxygen content, the lower the amount of surfactant adsorbed. In contrast, no obvious relationship could be drawn between the surfactant amount adsorbed and the surface area.     

Anionic Graft Copolymers. III. Hydrogenation of Polydienes Grafted with Vinylaromatics

A new method is described to prepare graft copolymers of polystyrene and polyvinylcyclohexane on polyethylene and poly (ethylene, butene-1). Hydrogenation of the butadiene moieties of graft copolymers of polystyrene on poly-1, 4-butadiene and high vinyl polybutadiene forms graft copolymers of polystyrene on polyethylene and on poly (ethylene, butene-1). Graft copolymers of polyvinylcyclohexane on polyethylene and on poly (ethylene, butene-1) are prepared by completely hydrogenating graft copolymers of polystyrene on poly-1, 4-butadiene and on high vinyl polybutadiene. The physical properties of these polymer systems depend on composition and graft level, resulting in either tough polymers or elastomers.