Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

Experimental investigation and numerical simulation of the influence of resonator-length detuning on the output power,pulse duration and spectral width of a cw mode-locked picosecond optical parametric oscillator

We report on a cw mode-locked non-critically phase matched KTP optical parametric oscillator synchronously pumped by a picosecond Ti:Sapphire laser. High average signal output power of up to 950 mW over a large tuning range has been achieved. For this OPO the influence of resonator-length detuning on the output power, pulse duration and spectral bandwidth has been investigated. The measured data are in good agreement with the results of a numerical simulation using a split-step Fourier method which considers the group-velocity mismatch, the group-velocity dispersion and the self-phase modulation. The numerical simulation also describes the measured strong pump depletion and its influence on the OPO output and efficiency.     

Conceptual continuity as a mode of understanding complex systems: Applications to the dynamics sociopolitical systems

In complex biological systems, entities that are conceptually distinct but empirically related—such as sunlight and plant growth or antigene and immune response—are being explicitly linked through the identification of highly specific uninterrupted interaction sequences that take place between their macromolecular system components. These uninterrupted sequences of causation include common elements that are shared by the empirically related but conceptually distinct entities. Through the identification of specific shared elements, “conceptual continuity” is established between these entities. Examples are introduced to suggest that in sociopolitical systems, an analogous conceptual continuity can be established between distinct sociopolitical entities. The identification of specific shared elements, essential for the well being of each of the entities, can play a significant role in resolving conflicts between those separated by seemingly insurmountable obstacles such as race or religion or ideology. © 2006 Wiley Periodicals, Inc. Complexity 11:20–24, 2006     

Bis(μ6‐cis‐2,4,6,8,10,12,14,16‐octa­methyl­cyclo­octa­siloxane‐2,4,6,8,10,12,14,16‐octolato)octa­kis[(dimethyl­formamide)copper(II)] dimethyl­formamide solvate enclosing a pyrazine mol­ecule

The title compound, [Cu₈(C₈H₂₄O₂Si)₂(C₃H₇NO)₈]·C₄H₄N₂·C₃H₇NO, features a sandwich‐like cage enclosing a pyrazine mol­ecule, both situated on a centre of inversion. In addition, the crystal structure contains one dimethyl­formamide mol­ecule which is disordered over a centre of inversion. The copper layer, containing eight atoms, is located between two siloxanolate fragments. The whole structure of Cu atoms and siloxanolate rings is distorted by the pyrazine mol­ecule, leading to an oval form. As a result, the angles between the Cu atoms differ at the copper layer. The difference in the angles could lead to some deviations in the Cu–Cu exchange inter­actions within the copper ring, which is of inter­est for mol­ecular magnetism.     

A Survey on Explicit Representation Formulae for Fundamental Solutions of Linear Partial Differential Operators

In the present article, we aim at treating the existence of fundamental solutions of linear partial differential operators with constant coefficients from the viewpoint of setting up explicit formulae yielding fundamental solutions.     

Quantitative electron probe microanalysis for the characterization of thin carbon-boron layers in fusion devices

Summary The first wall of the fusion device TEXTOR at the Forschungszentrum Jülich has been coated in situ with an amorphous hydrogen rich carbon/boron film (a-C/B:H) which reduces plasma impurities caused by the plasma surface interaction. The results of the coating process of the 35 m² large inner wall surface have been controlled by a recently developed modification of the quantitative electron probe microanalysis, which has been applied to 12 samples from specified positions inside the tokamak. The quantification itself is based on a Monte Carlo simulation of electron trajectories providing very accurate results for X-ray intensities emitted by elements present in the electron bombarded sample. The Monte Carlo results are used in the present work to calibrate the measured X-ray intensities emitted by boron and carbon from the a-C/B:H layers deposited on pure silicon substrates. As a result the total deposited mass of the layer per area unit as well as the composition of the layers (except hydrogen) could be determined very accurately. The relative errors were less than 7%. The limit of detectability were found to be in the range of one monolayer for boron as well as for carbon.     

Über die abstandsverträglichen Abbildungen auf dem Kreis und auf der reellen Geraden

Zusammenfassung. Eine Abbildung zwischen metrischen R?umen hei?t abstandsvertr?glich, wenn der Abstand der Bilder zweier Punkte nur vom Abstand der Punkte selbst abh?ngt. Wir zeigen, dass eine Abbildung genau dann abstandsvertr?glich ist, wenn der Cauchyschen Funktionalgleichung genügt, also ein Endomorphismus der Gruppe ist. Ein entsprechendes Resultat gilt auch für die abstandsvertr?glichen Abbildungen des Kreises (mit der Multiplikation komplexer Zahlen als Gruppenverknüpfung). Damit kann man sowohl alle messbaren abstandsvertr?glichen Abbildungen von bzw. in sich angeben, als auch einen Nachweis für die Existenz nichtmessbarer abstandsvertr?glicher Abbildungen auf und erbringen. Eingegangen am 20. Juni 2001 / Angenommen am 13. September 2001