Photopolymerization of enzymatically synthesized methacrylated poly(caprolactone) with poly(ethylene glycol) macromonomer

Polycaprolactone (PCL) based α,ω-methacrylated macromonomer (DMPCL) was synthesized via enzymatic ring-opening polymerization (eROP) by using Novozyme 435 as the enzyme immobilized catalyst. DMPCL was further photopolymerized with monofunctional poly(ethylene glycol) methyl ether methacrylate (PEGMA-950) macromonomer and trimethylolpropane triacrylate (TMPTA) as tri-functionalized crosslinking agent in glass vials when CHCl₃ was the solvent and Irgacure 819 was the photoinitiator. Ultraviolet (UV) Light Emitting Diode (LED) bulbs enabled photoinduced reactions at room temperature with low heat generation and high reaction efficiency. The obtained gels were characterized with Fourier Transform Infrared Spectroscopy (FT-IR) and Differential Scanning Calorimetry (DSC). DMPCL participated as an effective crosslinking agent in the photopolymerization of PEGMA-950. Combined usage of DMPCL and PEGMA-950 resulted in significantly more effective polymerization than the separate photopolymerizations of these macromonomers.     

Transgenic Artemisia dubia WALL showed altered phytochemistry and pharmacology

The rol genes have been shown to enhance the production of secondary metabolites in plants. This report examines the effect of trans-genes (rol ABC) on possible high production of biologically important phytochemicals and enhanced pharmacological activities. Three transgenic lines (1, 2 and 3) of Artemisia dubia WALL (transformed with Agrobacterium tumefaciens harboring rol ABC genes) were subjected to phytochemical analysis and pharmacological studies. A great variation in phytochemistry and the pharmacological activities was observed not only between the transgenic and non-transgenic control plants but also among the transgenic lines itself. Comparative chemical profile obtained via HPLC, TLC and spectrophotometry showed high degree of variations in the quantity of phytochemicals. An increased production of total flavonoids (71.1% in transgenic line 2) and total phenolics (110.8% in transgenic line 1), increase in caffeic acid and catechin and a decrease in gallic acid content in the extracts of transformed plants compared to the untransformed control plants was decreased. In case of pharmacological activities, moderate to high level increase in antimicrobial (antibacterial and antifungal) activities, cytotoxicity (14.1%), antitumor (29%) and antioxidant activities (23.9%) was observed (in transgenic line 2). In general all the three transgenic lines under study showed improvement in their pharmacological activities in the order of transgenic line 2 > 1 > 3 > control. The implication of these findings will help to meet the increasing demand of pharmacologically important compounds.     

Probing structural determinants distal to the site of hydrolysis that control substrate specificity of the 20S proteasome

The 20S proteasome is a large multicomponent protease complex. Relatively little is known about the mechanisms that control substrate specificity of its multiple active sites. We present here the crystal structure at 2.95 A resolution of a beta2-selective inhibitor (MB1) bound to the yeast 20S proteasome core particle (CP). This structure is compared to the structure of the CP bound to a general inhibitor (MB2) that covalently modified all three (beta1, beta2, beta5) catalytic subunits. These two inhibitors differ only in their P3 and P4 residues, thereby highlighting binding interactions distal to the active site threonine that control absolute substrate specificity of the complex. Comparisons of the CP-bound structures of MB1, MB2, and the natural products epoxomycin and TMC-95A also provide information regarding general binding modes for several classes of proteasome inhibitors.     

Iron-arylimide clusters [Fe(m)()(NAr)(n)Cl(4)](2)(-) (m,n = 2, 2; 3, 4; 4, 4) from a ferric amide precursor: synthesis,characterization, and comparison to Fe-S chemistry

Tetrahedral FeCl[N(SiMe(3))(2)](2)(THF) (2), prepared from FeCl(3) and 2 equiv of Na[N(SiMe(3))(2)] in THF, is a useful ferric starting material for the synthesis of weak-field iron-imide (Fe-NR) clusters. Protonolysis of 2 with aniline yields azobenzene and [Fe(2)(mu-Cl)(3)(THF)(6)](2)[Fe(3)(mu-NPh)(4)Cl(4)] (3), a salt composed of two diferrous monocations and a trinuclear dianion with a formal 2 Fe(III)/1 Fe(IV) oxidation state. Treatment of 2 with LiCl, which gives the adduct [FeCl(2)(N(SiMe(3))(2))(2)](-) (isolated as the [Li(TMEDA)(2)](+) salt), suppresses arylamine oxidation/iron reduction chemistry during protonolysis. Thus, under appropriate conditions, the reaction of 1:1 2/LiCl with arylamine provides a practical route to the following Fe-NR clusters: [Li(2)(THF)(7)][Fe(3)(mu-NPh)(4)Cl(4)] (5a), which contains the same Fe-NR cluster found in 3; [Li(THF)(4)](2)[Fe(3)(mu-N-p-Tol)(4)Cl(4)] (5b); [Li(DME)(3)](2)[Fe(2)(mu-NPh)(2)Cl(4)] (6a); [Li(2)(THF)(7)][Fe(2)(mu-NMes)(2)Cl(4)] (6c). [Li(DME)(3)](2)[Fe(4)(mu(3)-NPh)(4)Cl(4)] (7), a trace product in the synthesis of 5a and 6a, forms readily as the sole Fe-NR complex upon reduction of these lower nuclearity clusters. Products were characterized by X-ray crystallographic analysis, by electronic absorption, (1)H NMR, and M?ssbauer spectroscopies, and by cyclic voltammetry. The structures of the Fe-NR complexes derive from tetrahedral iron centers, edge-fused by imide bridges into linear arrays (5a,b; 6a,c) or the condensed heterocubane geometry (7), and are homologous to fundamental iron-sulfur (Fe-S) cluster motifs. The analogy to Fe-S chemistry also encompasses parallels between Fe-mediated redox transformations of nitrogen and sulfur ligands and reductive core conversions of linear dinuclear and trinuclear clusters to heterocubane species and is reinforced by other recent examples of iron- and cobalt-imide cluster chemistry. The correspondence of nitrogen and sulfur chemistry at iron is intriguing in the context of speculative Fe-mediated mechanisms for biological nitrogen fixation.     

Development of boundary transfer method in simulation of gas–solid turbulent flow of a riser

Computational fluid dynamics (CFD) is used to simulate the behavior of two phase gas solid in a fluid catalytic cracking (FCC) riser. Gas and particle phases are considered as separate fully interpenetrating continuous media within each control volume. Each phase described in terms of its own separate mass and momentum conservation equations. Simple k–epsilon (k_g–?_g) turbulence model is used for the gas phase and the solid phase is handled with the kinetic theory of granular flows. Source terms are used to account for the influence of hydrodynamic drag on the production, dissipation and exchange of turbulent kinetic energy between the phases. For the particles partial slip condition is considered at the wall.     

Applying a non-equilibrium wall function in k–ε turbulent modelling of hydrodynamic circulating flow

Wall bounded flow with severe adverse pressure, separation, reattachment and stagnation has non-equilibrium (NE) exhibition. A wall function in turbulent flow is a remedy to avoid resolving near wall complex phenomena using predetermined functions as boundary conditions. The advantage of this case is permission to use a relatively coarse near wall cells and hence saving CPU time. Standard wall function (SWF) is a semi-empirical function that is just valid for constant shear near wall cell and local equilibrium flow. Popovac and Hanjalic introduced a non-equilibrium wall function as (PWF) with a blending method in v²–f model. To investigate PWF in circulating flow, standard k–ε model that has key role in complex and expensive industrial problems is used in this study. The approach derived by Popovac and Hanjalic retains the functional form of the SWF and can be easily implemented in existing code. Simulation results are validated against direct numerical simulation (DNS) on channel and experimental data on backward facing step (BS) and a sharp U bend flow. Prediction with PWF shows that use of this wall function in k–ε model has not any sensitive change in near equilibrium flow. However, produces an improvement in NE conditions like flow in circulation zones.     

Some investigations in holographic microscopic interferometry with respect to the estimation of stress and strain in micro-opto-electro-mechanical systems (MOEMS)

Holographic microscopy with conjugate reconstruction for the interferometric determination of three-dimensional displacement was used for the investigation of the mechanical behaviour of micromechanic and microelectronic components. An experimental set-up for the exposure of the holographic interferograms is described for the application of the spatial heterodyne technique, for the application of phase shifting, and for electro-optic holography. Three holograms for different illumination directions recorded on one holographic plate were reconstructed conjugately, and spatial-heterodyne technique as well as phase-shift technique were used to evaluate the interferograms. Only by conjugated reconstruction, it is possible to obtain a perfectly optimised interferometer for the static evaluation method. The evaluation of interferograms, which are strongly disturbed by speckle noise, can be performed successfully. A comparison of the results of the application of these techniques is given. The influence of the speckle effect on the resolution was investigated.     

Optimised crossover genetic algorithm for capacitated vehicle routing problem

This paper presents a genetic algorithm for solving capacitated vehicle routing problem, which is mainly characterised by using vehicles of the same capacity based at a central depot that will be optimally routed to supply customers with known demands. The proposed algorithm uses an optimised crossover operator designed by a complete undirected bipartite graph to find an optimal set of delivery routes satisfying the requirements and giving minimal total cost. We tested our algorithm with benchmark instances and compared it with some other heuristics in the literature. Computational results showed that the proposed algorithm is competitive in terms of the quality of the solutions found.     

Bioflavonoid-Induced Apoptosis and DNA Damage in Amastigotes and Promastigotes of Leishmania donovani: Deciphering the Mode of Action

Natural products from plants contain many interesting biomolecules. Among them, quercetin (Q), gallic acid (GA), and rutin (R) all have well-reported antileishmanial activity; however, their exact mechanisms of action are still not known. The current study is a step forward towards unveil the possible modes of action of these compounds against Leishmania donovani (the causative agent of visceral leishmaniasis). The selected compounds were checked for their mechanisms of action against L. donovani using different biological assays including apoptosis and necrosis evaluation, effects on genetic material (DNA), quantitative testing of nitric oxide production, ultrastructural modification via transmission electron microscopy, and real-time PCR analysis. The results confirmed that these compounds are active against L. donovani, with IC₅₀ values of 84.65 µg/mL, 86 µg/mL, and 98 µg/mL for Q, GA, and R, respectively. These compounds increased nitric oxide production and caused apoptosis and DNA damage, which led to changes in the treated cells’ ultrastructural behavior and finally to the death of L. donovani. These compounds also suppressed essential enzymes like trypanothione reductase and trypanothione synthetase, which are critical for leishmanial survival. The selected compounds have high antileishmanial potentials, and thus in-vivo testing and further screening are highly recommended.