Reflection of plane waves in generalized thermoelasticity of type III with nonlocal effect

The generalized thermoelasticity theory based upon the Green and Naghdi model III of thermoelasticity as well as the Eringen's nonlocal elasticity model is used to study the propagation of harmonic plane waves in a nonlocal thermoelastic medium. We found two sets of coupled longitudinal waves, which are dispersive in nature and experience attenuation. In addition to the coupled waves, there also exists one independent vertically shear-type wave, which is dispersive but experiences no attenuation. All these waves are found to be influenced by the elastic nonlocality parameter. Furthermore, the shear-type wave is found to face a critical frequency, while the coupled longitudinal waves may face critical frequencies conditionally. The problem of reflection of the thermoelastic waves at the stress-free insulated and isothermal boundary of a homogeneous, isotropic nonlocal thermoelastic half-space has also been investigated. The formulae for various reflection coefficients and their respective energy ratios are determined in various cases. For a particular material, the effects of the angular frequency and the elastic nonlocal parameter have been shown on phase speeds and the attenuation coefficients of the propagating waves. The effect of the elastic nonlocality on the reflection coefficients and the energy ratios has been observed and depicted graphically. Finally, analysis of the various results has been interpreted.     

Lower bound of measure and embeddings of Sobolev,Besov and Triebel–Lizorkin spaces

In this article, we study the relation between Sobolev-type embeddings for Sobolev spaces or Hajłasz–Besov spaces or Hajłasz–Triebel–Lizorkin spaces defined on a doubling and geodesic metric measure space and lower bound for measure of balls either in the whole space or in a domain inside the space.     

Microstructure and mechanical properties of nano-Y2O3 dispersed ferritic steel synthesized by mechanical alloying and consolidated by pulse plasma sintering

Ferritic steel with compositions 83.0Fe–13.5Cr–2.0Al–0.5Ti (alloy A), 79.0Fe–17.5Cr–2.0Al–0.5Ti (alloy B), 75.0Fe–21.5Cr–2.0Al–0.5Ti (alloy C) and 71.0Fe–25.5Cr–2.0Al–0.5Ti (alloy D) (all in wt%) each with a 1.0?wt% nano-Y₂O₃ dispersion were synthesized by mechanical alloying and consolidated by pulse plasma sintering at 600, 800 and 1000°C using a 75-MPa uniaxial pressure applied for 5?min and a 70-kA pulse current at 3?Hz pulse frequency. X-ray diffraction, scanning and transmission electron microscopy and energy disperse spectroscopy techniques have been used to characterize the microstructural and phase evolution of all the alloys at different stages of mechano-chemical synthesis and consolidation. Mechanical properties in terms of hardness, compressive strength, yield strength and Young's modulus were determined using a micro/nano-indenter and universal testing machine. All ferritic alloys recorded very high levels of compressive strength (850–2850?MPa), yield strength (500–1556?MPa), Young's modulus (175–250?GPa) and nanoindentation hardness (9.5–15.5?GPa), with up to 1–1.5 times greater strength than other oxide dispersion-strengthened ferritic steels (<1200?MPa). These extraordinary levels of mechanical properties can be attributed to the typical microstructure of uniform dispersion of 10–20-nm Y₂Ti₂O₇ or Y₂O₃ particles in a high-alloy ferritic matrix.     

Porosity Switching in Polymorphic Porous Organic Cages with Exceptional Chemical Stability

Porous solids that can be switched between different forms with distinct physical properties are appealing candidates for separation, catalysis, and host–guest chemistry. In this regard, porous organic cages (POCs) are of profound interest because of their solution‐state accessibility. However, the application of POCs is limited by poor chemical stability. Synthesis of an exceptionally stable imine‐linked (4+6) porous organic cage ( TpOMe‐CDA ) is reported using 2,4,6‐trimethoxy‐1,3,5‐triformyl benzene (TpOMe) as a precursor aldehyde. Introduction of the ‐OMe functional group to the aldehyde creates significant steric and hydrophobic characteristics in the environment around the imine bonds that protects the cage molecules from hydrolysis in the presence of acids or bases. The electronic effect of the ‐OMe group also plays an important role in enhancing the stability of the reported POCs. As a consequence, TpOMe‐CDA reveals exceptional chemical stability in neutral, acidic and basic conditions, even in 12 m NaOH. Interestingly, TpOMe‐CDA exists in three different porous and non‐porous polymorphic forms (α, β, and γ) with respect to differences in crystallographic packing and the orientation of the flexible methoxy groups. All of the polymorphs retain their crystallinity even after treatment with acids and bases. All the polymorphs of TpOMe‐CDA differ significantly in their properties as well as morphology and could be reversibly switched in the presence of an external stimulus.     

Effect of structure and concentration of polymer, metal ion and pH of the medium on the fluorescence characteristics of hyperbranched polyamines

A series of hyperbranched polyamines have been prepared by the reported method. All these polyamines exhibit fluorescence at about 350-650 nm with maximum intensity at about 450 nm. The study shows that the fluorescence intensity and the range of wavelength of fluorescence are strongly influenced by the structure of the hyperbranched polyamines. The effect of concentration of the polymer, pH of the medium and metal ion has also been investigated on the fluorescence characteristics of sulfone containing hyperbranched polyamine (Ps), as it shows the best result among the studied polymers. The results show that the intensity of fluorescence increases with the decrease of concentration (5-0.1 g/L in N,N′-dimethyl sulfoxide) of polymer and with the increase of pH (3.1-11.6) of the medium. The quenching of fluorescence increases with the increase of concentration of Cu²⁺ ions (0.01-0.04%). The hyperbranched polyamine (Ps) has also been end capped with benzoyl chloride and 4-hydroxybenzaldehyde to study the influence of end groups. The results showed that the structure of end capped compounds has prominent role to influence fluorescence characteristics of this hyperbranched polyamine.     

Annulation-Induced Hidden Reactivity of the 1,2,4-Triazole Backbone

Triazoles are an important class of compounds with widespread applications. Functionalization of the triazole backbone is thus of significant interest. In comparison to 1,2,3-triazoles, C−H activation-functionalization of the congeners 1,2,4-triazoles is surprisingly underdeveloped. Indeed, no such C−H activation-functionalization has been reported for 4-substituted 1,2,4-triazole cores. Furthermore, although denitrogenative ring-opening of 1,2,3-triazoles is well-explored, 1,2,4-triazole/triazolium substrates have not been known to exhibit N−N bond-cleaving ring-opening reactivity so far. In this work, we unveiled an unusual hidden reactivity of the 1,2,4-triazole backbone involving the elusive N−N bond-cleaving ring-opening reaction. This new reactivity was induced by a Satoh-Miura-type C−H activation-annulation at the 1,2,4-triazole motif appended with a pyridine directing group. This unique reaction allowed ready access to a novel class of unsymmetrically substituted 2,2′-dipyridylamines, with one pyridine ring fully-substituted with alkyl groups. The unsymmetrical 2,2′-dipyridylamines were utilized to access unsymmetrical boron-aza-dipyridylmethene fluorescent dyes. Empowered with desirable optical/physical properties such as large Stokes shifts and suitable hydrophobicity arising from optimal alkyl chain length at the fully-substituted pyridine-ring, these dyes were used for intracellular lipid droplet-selective imaging studies, which provided useful information toward designing suitable lipid droplet-selective imaging probes for biomedical applications.     

Vegetable oil-based flame retardant epoxy/clay nanocomposites

Flammability of epoxy appears to be one of the greatest threats and hence limits its advanced applications. The present investigation, therefore, reports on vegetable oil-based self-extinguishing epoxy/clay nanocomposites for the first time. These nanocomposites were prepared by the ex-situ technique using mechanical shearing and ultrasonication at different loadings (1, 2.5 and 5 wt%) of nano-clay. Monoglyceride of Mesua ferrea L. seed oil, bisphenol-A and tetrabromobisphenol-A based epoxy resin was used as the matrix. XRD, TEM, SEM, FTIR and rheological studies confirmed partially exfoliated nanocomposites formation. The study demonstrates two fold improvements of tensile strength and scratch hardness, three-fold increase in adhesive strength and 20 units increase in gloss value without any change in impact resistance through nanocomposite formation. TG studied confirmed the enhancement of thermal stability of the nanocomposite by 25 °C. The limiting oxygen index values and UL 94 test indicated the self-extinguishing characteristic of the nanocomposites.     

Bio-based waterborne polyester/cellulose nanofiber-reduced graphene oxide–zinc oxide nanocomposite: an approach towards sustainable mechanically robust anticorrosive coating

Cellulose - The protection of metal surfaces from corrosion by sustainable polymeric coatings is an interesting research topic. Herein, an environmentally benevolent fabrication of a bio-based...     

Bio‐based high‐performance waterborne hyperbranched polyurethane thermoset

Tannic‐acid‐based low volatile organic compound‐containing waterborne hyperbranched polyurethane was prepared. In order to improve the performance, it was modified in an aqueous medium using a glycerol‐based hyperbranched epoxy and vegetable‐oil‐based poly(amido amine) at different wt%. The combined system was cross‐linked by heating at 100°C for 45 min. Fourier transform infrared spectroscopy and swelling study were used to confirm the curing. A dose‐dependent improvement of properties was witnessed for the thermoset. Thermoset with 30 wt% epoxy showed excellent improvements in mechanical properties like tensile strength (~3.4 fold), scratch hardness (~2 fold), impact resistance (~1.3 fold), and toughness (~1.7 fold). Thermogravimetric analysis revealed enhancement of thermal properties (maximum 70°C increment of degradation temperature and 8°C increment of T_g). The modified system showed better chemical and water resistance compared with the neat polyurethane. Biodegradation study was carried out by broth culture method using Pseudomonas aeruginosa as the test organism. An adequate biodegradation was witnessed, as evidenced by weight loss profile, bacterial growth curve, and scanning electron microscope images. The work showed the way to develop environmentally benign waterborne polyurethane as a high‐performance material by incorporating a reactive modifier into the polymer network. Use of benign solvent and bio‐based materials as well as profound biodegradability justified eco‐friendliness and sustainability of the modified system. Copyright © 2015 John Wiley & Sons, Ltd.     

Ionic transport studies in hyperbranched polyurethane/clay nanocomposite gel polymer electrolytes

In the present work, we report a novel nanocomposite gel electrolytes based on intercalation of hyperbranched polyurethane (HBPU) into organically modified montmorillonite for application in Li-ion batteries. The nanocomposites have been prepared by solution intercalation technique with varying clay loading. The formation of partially exfoliated nanocomposites has been confirmed by X-ray diffraction. Nanocomposites were soaked with 1 M LiCO₄ in 1:1 (v/v) solution of propylene carbonate and diethyl carbonate to get the required gel electrolytes. AC impedance analysis shows that ionic conductivity increases with the increase of clay loading and attains the highest value of 8.3?×?10^?3 S/cm for 5 wt.% clay concentration. Surface morphology of the nanocomposite electrolytes has been examined by SEM analysis. Improvement of electrochemical properties, viz., electrochemical potential window and interfacial stability, is also observed in the clay-loaded HBPU samples.