Synthesis, stereochemistry, and circular dichroism of optically active o-substituted diphenyl sulphilimines and related compounds

Optically active o-substituted diphenyl N-substituted sulphilimines are readily synthesised by the reaction of the corresponding sulphides and t-butyl hypochlorite in the presence of l-menthol and amide anions. (−)-N-p-Tolylsulphonylsulphilimines (1, 2) obtained were converted to the corresponding (−)-N-unsubstituted sulphilimines (8, 9) by treating them with concentrated sulphuric acid. When (−)-S-o-anisyl S-phenyl N-(unsubstituted) sulphilimine (8) was treated with acylating agents or acrylonitrile, the corresponding optically active (−)-N-substituted sulphilimines were prepared with complete retention at sulphur. The absolute configuration of (−)-S-o-anisyl S-phenyl N-p-tolylsulphonylsulphilimine (1) was determined by converting it to (+)-S-o-anisyl sulphoxide (17). CD curves of (−)-o-substituted diarylsulphilimines exhibited a negative Cotton effect at around 270–285 nm, which was assigned to (S)-configuration at sulphur by comparing with the analogous sulphoxides. The substituent on the imino group of the sulphilimine gave no appreciable effect on the CD behavior and the lack of substituent effect was considered to be due to the semi-polar character of the S(IV)-N bond. Unusual effect of o-methoxy group on the CD curves was discussed in connection with solvent effect. Mechanism of this asymmetric synthesis has been investigated, and it has become apparent that the diastereomeric menthoxysulphonium chloride was an excess of (RR)-configuration was formed initially and the amide anion attacks the S atom of the salt with net inversion.     

Protective effects of small amounts of bis(2-ethylhexyl)sulfosuccinate on the helical structures of human and bovine serum albumins in their thermal denaturations

The protective effect of an anionic double-tailed surfactant, sodium bis(2-ethylhexyl)sulfosuccinate (AOT), on the structures of human serum albumin (HSA) and bovine serum albumin (BSA) in their thermal denaturations was examined by means of circular dichroism measurements. The structural changes of these albumins were reversible in the thermal denaturation below 50 degrees C, but became partially irreversible above this temperature. The effect was observed in the thermal denaturation above 50 degrees C. Although the helicity of HSA decreased from 66% to 44% at 65 degrees C in the absence of the surfactant, the decrement of it was restrained in the coexistence of AOT of extremely low concentrations. When the HSA concentration was 10 muM, the maximal protective effect appeared at 0.15 mM AOT. In the coexistence of the surfactant of this concentration, the helicity was maintained at 58% at 65 degrees C, increasing to the original value upon cooling to 25 degrees C. Beyond 0.15 mM AOT, the helicity sharply decreased until 3 mM AOT. A particular AOT concentration required to induce the maximal protective effect ([AOT]REQ) was examined at different HSA concentrations. [AOT]REQ shifted to higher values with an increase of the protein concentration. From the protein concentration dependences of [AOT]REQ, the maximal protection was estimated to require 8.0 and 5.0 AOT ions per a molecule of HSA and BSA, respectively. The AOT concentration, where the protective effect was observed, was too low to form its micelle-like aggregate. Then the protein structures might be stabilized by a cross-linking of surfactant monomers bound to specific sites. These specific sites might exist between a group of nonpolar residues and a positively charged residue located on several sets of amphiphilic helical rods in the proteins. Such a unique function of the double-tailed ionic surfactant is first presented by its characteristic nature as an amphiphilic material.     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).     

Preparation and Crystal Structures of 4-(4′-Pyridylthio)-1-methylpyridinium Salts: Assembly of a Donor-Acceptor-Type Molecule Containing a Sulfide Bridge

A series of ionic 4-(4′-pyridylthio)-1-methylpyridinium salts with different counteranions (1, I⁻; 2, BF⁻₄; 3, PF⁻₆; and 4, OTf⁻, where OTf=trifluoromethanesulfonate) have been prepared. Structural analysis reveals that the cation exhibits a variety of stacking structures dependent on the anion. Compound 1 crystallizes in space group P2_1/n (#14), with a=10.764(3) Å, b=9.601(5) Å, c=13.105(3) Å, β=108.35(2), V=1285.4(8) ų, and Z=4. In this compound, each cation moiety is stacked in a helical arrangement along the c-axis. Compound 2, which is isomorphous to 1, has space group P2_1/n (#14), with a=11.647(2) Å, b=9.203(3) Å, c=13.232(2) Å, β=108.42(2), V=1345.6(5) ų, and Z=4. Compound 3 crystallizes in space group P2_1/n (#14), with a=8.06(1) Å, b=17.43(1) Å, c=10.30(1) Å, β=103.0(1), V=1410(3) ų, and Z=4. In this salt, the cation molecules assume a head-to-tail stacking arrangement, forming a polar pseudo 1-D chain. Compound 4 crystallizes in space group Pb? (#2), with a=7.585(4) Å, b=15.443(7) Å, c=6.775(4) Å, α=99.33(4), β=108.35(2)^o, γ=98.37(4), V=756.6(7) ų, and Z=2. The structure of 4 consists of a columnar stacking of pyridine moieties, with the cation moieties surrounded by the counteranions. Calculations show that the 4-(4′-pyridylthio)-1-methylpyridinium cation may be a good building block for second harmonic generation (SHG) materials, even though salts 1-4 crystallized in centrosymmetric structures and were SHG inactive.     

Adsorption of fission products on a metal surface in nitric acid solutions: Radiochemical study using a multitracer

Adsorption behavior of fission products in nitric acid solution on various alloys and metals was studied by using a multitracer produced by neutron irradiation of UO₂. The adsorption behavior of the fission products ⁹⁹Mo, ¹³¹I, ¹³²Te, ¹⁴⁰La, and ¹⁴³Ce, and ²³⁹Np was simultaneously studied. Some chemical decontamination tests were also examined. Clear adsorption of ⁹⁹Mo, ¹³¹I, and ¹³²Te was observed, whereas adsorption of ¹⁴⁰La, ¹⁴³Ce, and ²³⁹Np was not. The adsorption characteristics were discussed by considering anion-exchange reaction and surface complexation.     

Secondary structural changes of chymotrypsinogen A,alpha-chymotrypsin,and the isolated polypeptides Cys1-Leu13, Ile16-Tyr146, and Ala149-Asn245 in sodium dodecyl sulfate,urea and guanidine hydrochloride

Secondary structural changes of chymotrypsinogen A,-chymotrypsin, and their isolated polypeptides Cys¹-Leu¹³, Ile¹⁶-Tyr¹⁴⁶, and Ala¹⁴⁹-Asn²⁴⁵were examined in aqueous solutions of sodium dodecyl sulfate (SDS), urea, and guanidine hydrochloride (residue numbers from chymotrypsinogen). After the fragmentation by the cleavage of disulfide bridges in-chymotrypsin, the helical structure was formed in the isolated polypeptide 16–146 where the helical segments do not exist in the protein state. The polypeptide 149–245, where the helical segments of the parent protein are originally located, contained no helices. The polypeptide 1–13 was almost disordered. The three polypeptides, chymotrypsinogen,-chymotrypsin and the polypeptide 16–146, clearly showed differences in the stabilities of helical structures in solutions of urea and guanidine hydrochloride. The addition of SDS accelerated the formation of helical structures in each polypeptide except for 1–13.