Refinements to the diastereoisomer-specific method for the analysis of hexabromocyclododecane

The emergence of hexabromocyclododecane (HBCD) as a bromine-based flame retardant of concern is partly attributable to recent measurements on the environmental occurrence of the individual diastereoisomers (alpha, beta and gamma). These measurements were fuelled by a newly developed liquid chromatography/tandem mass spectrometric (LC/MS/MS)-based analytical method. However, in the course of our recent studies on the environmental fate and behaviour of the diastereoisomers of HBCD, some interesting features of the LC/MS/MS method became apparent. For example, the ion signal of the native ions was found to be dependent on the final extract volume. This was true for both biotic and sediment samples and was found to arise from the suppression of the ion signal due to endogenous material in the extracts that escape clean-up. We have also found differences in the stability of the diastereoisomers in different solvents. If left unaccounted for, both factors can compromise analytical measurement data. By way of a series of controlled experiments conducted at our two laboratories [Department of Fisheries & Oceans Canada (DFO) and Environment Canada (EC)], we illustrate these features and demonstrate that use of newly synthesized labelled HBCD isomers [(13-carbon (13C) and deuterium (d18)] can minimize and often circumvent matrix-related effects.     

Improved method to determine succinylacetone in dried blood spots for diagnosis of tyrosinemia type 1 using UPLC-MS/MS

We describe an improved diagnostic method for tyrosinemia type 1 based on quantifying succinylacetone in dried blood spots by ultra-performance liquid chromatography tandem mass spectrometry. Succinylacetone extracted from a single 3/16 inch disk of specimen collection paper containing a dried blood spot was derivatized with dansylhydrazine, separated on an Acquity UPLC BEH C(18) column (2.1 x 50 mm, 1.7 microm) and detected by electrospray ionization tandem mass spectrometry. Succinylacetone derivative eluted at 0.6 min with a complete run time of 1 min. Using a 13C4 labeled succinylacetone as an internal standard, the calibration plot was linear up to 100 micromol/L with a detection limit (S/N = 3) of 0.2 micromol/L. Intra-day (n = 13) and inter-day (n = 10) variations were better than 10%. The cutoff level of succinylacetone in dried blood spots from healthy infants obtained by the current method was 0.63 micromol/L (n = 151). In dried blood spots from patients with established tyrosinemia type 1 (n = 11), concentration of succinylacetone was 6.4-30.8 micromol/L.     

The classification of finite groups by using iteration digraphs

A digraph is associated with a finite group by utilizing the power map f: G → G defined by f(x) = x^kfor all x ∈ G, where k is a fixed natural number. It is denoted by γG(n, k). In this paper, the generalized quaternion and 2-groups are stud- ied. The height structure is discussed for the generalized quaternion. The necessary and sufficient conditions on a power digraph of a 2-group are determined for a 2-group to be a generalized quaternion group. Further, the classification of two generated 2-groups as abelian or non-abelian in terms of semi-regularity of the power digraphs is completed.     

Time-weighted average water sampling with a diffusion-based solid-phase microextraction device

A new diffusion-based solid-phase microextraction (SPME) time-weighted average (TWA) field water sampling device was developed and investigated by field trial. The sampler is constructed with copper tube and caps and a commercial SPME fiber assembly. The device possesses all advantages of SPME; it is solvent-free, reusable, combines sampling, isolation and enrichment into one step, and the fiber can be directly injected into a gas chromatograph for analysis with a commercial SPME fiber holder, without further treatment. Field trials in Laurel Creek (Waterloo, Ont., Canada) and Hamilton Harbour (Hamilton, Ont., Canada) illustrated that the device is durable, easy to deploy, and the mass uptake of the device is independent of the face velocity. The device provides good precision [relative standard deviations (RSDs) are less than 20%] and the data obtained with this device are quite comparable to those obtained with the spot sampling method, which demonstrates that the newly developed SPME water sampling device is suitable for long-term monitoring of organic pollutants in water.     

Magnetic nondestructive technology for detection of tempered martensite embrittlement

A nondestructive eddy current technique is used to evaluate tempered martensite embrittlement in 4340 AISI steels after quench and tempering in the range 240–550 °C. A relation between the responses of the magnetic induction (normalized impedance of the coil) and destructive Charpy impact test results has been established. The study shows that the eddy current method could be used to separate brittle parts due to the microstructure changes.     

A novel ternary GO@SiO2‐HPW nanocomposite as an efficient heterogeneous catalyst for the synthesis of benzazoles in aqueous media

A new solid acid catalyst, consisting of 12‐phosphotungstic heteropoly acid (HPW) supported on graphene oxide/silica nanocomposite (GO@SiO₂), has been developed via immobilizing HPW onto an amine‐functionalized GO/SiO₂ surface through coordination interaction (GO@SiO₂‐HPW). The GO@SiO₂‐HPW nanocomposite was characterized by Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and powder X‐ray diffraction (XRD). The prepared nanocomposite could be dispersed homogeneously in water and further used as a heterogeneous, reusable, and efficient catalyst for the synthesis of benzimidazoles and benzothiazoles by the reaction of 1,2‐phenelynediamine or 2‐aminothiophenol with different aldehydes.     

Formal power series for asymptotically hyperbolic Bach-flat metrics

Letters in Mathematical Physics - It has been observed by Maldacena that one can extract asymptotically anti-de Sitter Einstein 4-metrics from Bach-flat spacetimes by imposing simple principles and...     

Field sampling with a polydimethylsiloxane thin-film

In this research, field samplers are developed using polydimethylsiloxane (PDMS) thin-film as the extraction phase. This technique is based on a similar theory, the solid-phase microextraction (SPME) technique. More specifically, the development of the field sampler involves cutting a section of PDMS thin-film into a specific size and shape, and mounting it onto a stainless steel wire (the handle). The thin-film is then placed into a protective copper cage prior to deployment to prevent biofouling. Kinetic calibration or equilibrium calibration with the standards in the extraction phase is used to introduce an isotopically labeled internal standard for on-site calibration. The initial loading of the standard onto the thin-film and the amount of standard remaining on the thin-film are determined using gas chromatography-mass spectrometry and subsequently used to estimate the concentration of the target analytes. In addition, the field samplers are deployed in the field at two locations (the Meuse River in Eijsden, The Netherlands from April to May, 2005 and Hamilton Harbour located at the western tip of Lake Ontario, ON, Canada from September to December, 2006). Polycyclic aromatic hydrocarbons are identified, and concentrations of fluoranthene and pyrene are estimated in the low ng/L range. The results from both sampling sites are within the expected ranges for environmental samples. This polymeric extraction phase has a high surface-to-volume ratio compared with SPME, which results in higher sensitivity and mass uptake, leading to the detection of lower levels of analytes that many other techniques are unable to achieve.     

Stable isotope dilution analysis of N-acetylaspartic acid in urine by liquid chromatography electrospray ionization tandem mass spectrometry

N-acetylaspartic acid (NAA) is a specific urinary marker for Canavan disease, an autosomal recessive leukodystrophy. We developed a 'dilute and shoot' stable isotope dilution liquid chromatography tandem mass spectrometry (LC-MS/MS) method for determination of NAA in urine. Deuterated internal standard d(3)-NAA was added to untreated urine and the mixture was injected into the LC-MS/MS system operated in the negative ion mode. Chromatography was carried out on a C(8) minibore column using 50% acetonitrile solution containing 0.05% formic acid at a flow rate of 0.25 mL/min. The retention time was 1.6 min and the turnaround time was 2.2 min. NAA and d(3)-NAA were analyzed in multiple reaction monitoring mode. Calibrators and quality control samples were prepared in pooled control urine. The assay was linear up to 2000 micromol/L with limit of quantification at 1 micromol/L (S/N = 12). Interassay and intraassay coefficients of variation were less than 7% and recovery at three different concentrations was 98.9-102.5%. The LC-MS/MS method for NAA as described involves no extraction and no derivatization, showed no interference and gave excellent recovery with low variability and short analytical time. The method was successfully applied for the retrospective analysis of urine from 21 Canavan disease cases.     

Analytical performance of a triple quadrupole mass spectrometer compared to a high resolution mass spectrometer for the analysis of polybrominated diphenyl ethers in fish

Polybrominated diphenyl ethers (PBDEs) are a class of flame retardants used globally in many consumer products and industrial applications. Traditionally, gas chromatography–high resolution mass spectrometry (GC–HR-MS) is the method of choice for analysis of PBDEs in environmental samples because it offers high sensitivity and selectivity, resulting in less interferences. However, the specificity offered by gas chromatography-triple quadrupole tandem mass spectrometry (GC–QQQ-MS/MS), operated in selected reaction monitoring mode, provides a more affordable alternative to GC–HR-MS for the analysis of PBDEs in complex environmental samples. In this study, an analytical method was developed for the analysis of 41 PBDE congeners in fish using GC–QQQ-MS/MS. Results from the analysis of three fish species [lake trout (Salvelinus namaycush), yellow perch (Perca flavescens), and round goby (Neogobius melanostomus)] using GC–QQQ-MS/MS were compared with those obtained by GC–HR-MS. These species were selected because they represent varying levels of lipid-rich matrix and contaminant loads. Instrumental limits of detection for the GC–QQQ-MS/MS ranged from 0.04 pg to 41 pg, whereas those for the GC–HR-MS ranged from 5 pg to 85 pg. The PBDE values obtained from these two methods were highly correlated, R² values >0.7, for all three fish species, supporting the suitability of GC–QQQ-MS/MS for analysis of PBDEs in fish with varying fat content.