Evolution of water vapor from indium-tin-oxide transparent conducting films fabricated by dip coating process

Tin-doped indium oxide In₂O₃ (indium-tin-oxide) transparent conducting films were fabricated on silicon substrates by a dip coating process. The thermal analysis of the ITO films was executed by temperature-programmed desorption (TPD) or thermal desorption spectroscopy (TDS) in high vacuum. Gas evolution from the ITO film mainly consisted of water vapor. The total amount of evolved water vapor increased on increasing the film thickness from approx. 25 to 250 nm and decreased by increasing the preparation temperature from 365 to 600°C and by annealing at the same temperature for extra 10 h. The evolution occurred via two steps; the peak temperatures for 250 nm thick films were approx. 100-120 and 205-215°C. The 25 nm thick films evolved water vapor at much higher temperatures; a shoulder at approx. 150-165°C and a peak at approx. 242°C were observed. The evolution temperatures increased by increasing the preparation and the annealing temperatures except in case of the second peak of the 25 nm thick films. The evolution of water vapor at high temperature was tentatively attributed to thermal decomposition of indium hydroxide, In(OH)₃, formed on the surface of the nm-sized ITO particles. This revised version was published online in August 2006 with corrections to the Cover Date.     

Observation of time-dependent CP violation in B0 --> eta'K0 decays and improved measurements of CP asymmetries in B0 --> phiK0, KS0KS0KS0 and B0 --> J/psiK0 decays

We present improved measurements of CP-violation parameters in B(0) --> phiK(0), eta(')K(0), KS(0)KS(0)KS(0) decays based on a sample of 535 x 10(6) BB pairs collected at the Upsilon(4S) resonance with the Belle detector at the KEKB energy-asymmetric e(+)e(-) collider. We obtain sin2phi1(eff)=+0.64+/-0.10(stat)+/-0.04(syst) for B(0) --> eta(')K(0), +0.50+/-0.21(stat)+/-0.06(syst) for B(0) --> phiK(0), and +0.30+/-0.32(stat)+/-0.08(syst) for B(0) --> KS(0)KS(0)KS(0) decays. We have observed CP violation in the B(0) --> eta(')K(0) decay with a significance of 5.6 standard deviations. We also perform an improved measurement of CP asymmetries in B(0) --> J/psiK(0) decays and obtain sin2phi1=+0.642+/-0.031(stat)+/-0.017(syst).     

Kaon interferometry in heavy-ion collisions at the CERN SPS

K⁺K⁺ and K^–K^– correlations from S+Pb collisions at 200 GeV/c per nucleon and K⁺K⁺ correlations from p+Pb collisions at 450 GeV/c per nucleon, are presented as measured by the focusing spectrometer of the NA44 experiment at CERN. Multidimensional fits are performed in order to characterize the kaon-emission volume, which is found to be smaller than the pion-emission volume.     

An enzyme electrode based on electromagnetic entrapment of the biocatalyst bound to magnetic beads

A new type of biosensor is described. It is based on the use of a Clark-type oxygen electrode placed in an electromagnetic field. The biomolecules used in this sensor are immobilized on small magnetic beads which are added to the system when needed and removed as required. By varying the strength of the magnetic field, a homogeneous distribution of particles at the electrode tip is achieved. The electrode is used for the determination of glucose with immobilized glucose oxidase as well as cells of Saccharomyces cerevisiae.     

Synthesis and structural and electronic properties of the diacetylene- and ethylene-groups connected octaethylporphyrin(Ni) tetramer

The tetramer of octaethylporphyrin nickel complex [OEP(Ni)], connected with diacetylene and ethylene linkages, was synthesized. Its structural and electronic properties were studied, proving that two constituents of the diacetylene-group connected OEP(Ni) dimer face to each other in s-cis conformation about the ethylene linkage but not so closely as to induce a transannular π-electronic interaction between them.     

Small non‐embeddable quasi‐derived designs

We establish the existence of non‐embeddable quasi‐derived 2‐designs with the parameters (13, 4, 3), (15, 6, 5), and (16, 6, 5). © 2007 Wiley Periodicals, Inc. J Combin Designs 16: 364–372, 2008     

Oligomerization of cadmium chalcogenide nanocrystals into CdTe-containing superlattice chains

Hierarchically-assembled binary cadmium chalcogenide (CdX, X = S, Se, Te) oligomers were engineered. CdTe precursor injections into a solution containing seeded nanocrystals provided longer oligomers possessing alternating and phase-separated CdX and CdTe constituents in the same wire, like an alternating copolymer.     

Multiplicity dependence of the pion source in S+A collisions at the CERN SPS

The emission of pions from relativistic heavy-ion collisions of S+S, S+Ag and S+Pb at 200 GeV/nucleon is characterized using two-particle interferometry. The multiplicity dependence of the pion source parameters near midrapidity is studied. The transversal (R _t) and longitudinal (R _l) pion source parameters are independent of the initial nuclei in the interaction and increase with increasing multiplicity. This suggests that the freeze-out process is governed mainly by the particle multiplicity. The multiplicity dependence is weaker than that expected from a simple model of a freeze-out at a constant density.     

Synthesis and structural and electronic properties of the octaethylporphyrin-dihexylbithiophene-fullerene derivatives (OEP-DHBTh-C60) connected with diacetylene linkage

Orientational isomers of the octaethylporphyrin-dihexylbithiophene-fullerene derivative (OEP-DHBTh-C₆₀) connected with the diacetylene linkage were synthesized. The electronic and electrochemical properties were studied, proving that the orientation of DHBTh affects not only the electronic structures of OEP-DHBTh-C₆₀ but also their molecular motional behaviors evidently.