Rhodathiaboranes with `anomalous' electron counts: synthesis, structure and reactivity

Analysis of the structures of 8,8-(PPh₃)₂-8,7-nido-RhSB₉H₁₀ and 9,9-(PPh₃)₂-9,7,8-nido-RhC₂B₈H₁₁ by RMS misfit calculations has confirmed that these rhodaheteroboranes possess nido 11-vertex cluster geometries in apparent contravention of Wade's rules. However, examination of the molecular structures of both species shows that the {RhP₂} planes are inclined by ca. 66° with respect to the metal-bonded SB₃ or CB₃ faces, and that two weak ortho-CHRh agostic interactions occupy the vacant co-ordination position thereby created. As a consequence of these agostic bonds the Rh atom, and hence the overall cluster, is provided with an additional electron pair, meaning that their nido structures are now fully consistent with Wade's rules. The chelated diphosphine compound 8,8-(dppe)-8,7-nido-RhSB₉H₁₀ is similar to the PPh₃ compound in showing the same agostic bonding. Attempts to prepare a bis-P(OMe)₃ analogue result in ligand scavenging and the formation of 8,8,8-{P(OMe)₃}₃-8,7-nido-RhSB₉H₁₀. Similarly, reaction between Cs[6-arachno-SB₉H₁₂] and RhCl(dmpe)CO does not result in CO loss but in formation of 8,8-(dmpe)-8-(CO)-8,7-nido-RhSB₉H₁₀, shown to exist as a mixture of two of three possible rotamers. Deprotonation of 8,8-(PPh₃)₂-8,7-nido-RhSB₉H₁₀ and 8,8-(dppe)-8,7-nido-RhSB₉H₁₀ with MeLi yields the anions [1,1-(PPh₃)₂-1,2-closo-RhSB₉H₉]⁻ and [1,1-dppe-1,2-closo-RhSB₉H₉]⁻, respectively, with octadecahedral cage structures. It is argued that anion formation causes the agostic bonding to be `switched-off' and results in the cluster adopting the closo architecture predicted by Wade's rules. This structural change is fully reversible on reprotonation, and if reprotonation of [1,1-(dppe)-1,2-closo-RhSB₉H₉]⁻ is carried out in MeCN, the product 8,8-(dppe)-8-(MeCN)-8,7-nido-RhSB₉H₁₀ forms. Interestingly, 8,8-(dppe)-8-(MeCN)-8,7-nido-RhSB₉H₁₀ reconverts to 8,8-(dppe)-8,7-nido-RhSB₉H₁₀ on standing in CDCl₃, suggesting that the agostic bonding is sufficiently strong to displace co-ordinated MeCN. All new compounds are fully characterised by multinuclear NMR spectroscopy and, in many cases, by single crystal X-ray diffraction.     

Synthesis and characterization of 3-phenylethynyl endcapped matrix resins

The synthesis of 3-phenylethynylphenol, and its applicability as a high temperature cross-linking endcap for high T_g polyarylene ethers is described. It was synthesized in high yields and purity using the palladium catalyzed coupling reaction between the protected 3-bromo or iodo phenol and phenylacetylene. The yield of the reaction was found to be highly dependent on the structure of the halide used, the reaction temperature, and the concentration of phenylacetylene. The use of the protected phenol in the palladium catalyzed reaction was also extended to the high yield synthesis of 3-ethynylphenol and protected 4-ethynylphenols. The complete synthesis of 3-phenylethynylphenol, 3-ethynylphenol, and protected 4-ethynylphenol in high yields has been demonstrated and is discussed herein. Three new phenylethynyl functionalized arylene ether matrix resins have been synthesized in high yields and purity by reacting 3-phenylethynylphenol with 4,4′-dichlorodiphenyl sulfone, 4,4′-difluorobenzophenone, and bis(4-fluorophenyl)phenyl phosphine oxide, via nucleophilic poly(arylene ether) synthesis conditions. These low molecular weight materials undergo thermally induced chain extension/branching to yield an insoluble three-dimensional network at reaction temperatures of around 380°C. The low molecular weight arylene ethers endcapped with the phenylethynyl group demonstrate excellent flow characteristics and a wide processing window of about 250°C. Crosslinking of the 4,4′-bis(3-phenylethynyl phenoxy)diphenyl sulfone system for 30 min at 350°C in air afforded a T_g value of 265°C by differential scanning calorimetry measurements. Trace metal analysis for palladium and copper showed absence of these metals that would otherwise detract from the excellent thermal stability. The synthesis and characterization of these phenylethynyl endcapped arylene ether matrix resins is discussed. © 1995 John Wiley & Sons, Inc.     

A subjective Bayesian approach to the theory of queues II — Inference and information in M/M/1 queues

This is a sequel to Part I of A Subjective Bayesian Approach to the Theory of Queues. The focus here is on inference and a use of Shannon's measure of information for assessing the amount of information conveyed by the various types of data from queues. The notation and terminology used here is established in Part I.     

Favorskii rearrangements—I: One electron transfer from α′-enolate intermediates to 3O2 in aprotic,polar- protic and mixed media

Evidene for the trapping of α′-enolate intermediates in Favorskii rearrangements by one-electron transfer (ET) to ³O₂ is presented. The mechanism of the ET reaction has been elucidated from studied of the extent of ET trapping, compared to H/D exchange. The trapping efficiency (alkene/esters) was found tobe dependent on the reaction medium, the pK_a of the α′-C-acid, (a larger pK_a favouring greater ET) and the substrate concentration. Conclusions from this work of relevance to the mechanism of the Favorskii rearrangement are outlined.     

An NMR study of methanol diffusion in polymer electrolyte fuel cell membranes

Methanol diffusion in two polymer electrolyte membranes, Nafion 117 and BPSH 40 (a 40% disulfonated wholly aromatic polyarylene ether sulfone), was measured using a modified pulsed field gradient NMR method. This method allowed for the diffusion coefficient of methanol within the membrane to be determined while immersed in a methanol solution of known concentration. A second set of gradient pulses suppressed the signal from the solvent in solution, thus allowing the methanol within the membrane to be monitored unambiguously. Over a methanol concentration range of 0.5–8 M, methanol diffusion coefficients in Nafion 117 were found to increase from 2.9 × 10⁻⁶ to 4.0 × 10⁻⁶ cm² s⁻¹. For BPSH 40, the diffusion coefficient dropped significantly over the same concentration range, from 7.7 × 10⁻⁶ to 2.5 × 10⁻⁶cm² s⁻¹. The difference in diffusion behavior is largely related to the amount of solvent sorbed by the membranes. Increasing the methanol concentration results in an increase in solvent uptake for Nafion 117, while BPSH 40 actually excludes the solvent at higher concentrations. In contrast, diffusion of methanol measured via permeability measurements (assuming a partition coefficient of 1) was lower (1.3 × 10⁻⁶ and 6.4 × 10⁻⁷ cm² s⁻¹ for Nafion 117 and BPSH 40 respectively) and showed no concentration dependence. The differences observed between the two techniques are related to the length scale over which diffusion is monitored and the partition coefficient, or solubility, of methanol in the membranes as a function of concentration. For the permeability measurements, this length is equal to the thickness of the membrane (178 and 132 μm for Nafion 117 and BPSH 40 respectively) whereas the NMR method observes diffusion over a length of approximately 4–8 μm. Regardless of the measurement technique, BPSH 40 is a greater barrier to methanol permeability at high methanol concentrations.     

Quantitative determination of binary and tertiary calcium carbonate mixtures using powder X-ray diffraction

The ability to determine the calcium carbonate polymorphic ratio of calcite, aragonite and vaterite in a mixture is important for a variety of applications, particularly the fields of biomineralisation and crystal engineering. Raman spectroscopy and powder X-ray diffraction were used to quantitatively determine the polymorphic composition of both binary and tertiary mixtures of calcium carbonate. It was found that the quantitative detection limits of powder X-ray diffraction were superior to both Raman and infrared spectroscopy.     

Perfectly alternating segmented polyimide-polydimethyl siloxane copolymers via transimidization

New strategies for the synthesis of perfectly alternating segmented polyimide-polydimethyl siloxane copolymers were developed by utilizing a transimidization method. Imide oligomers endcapped with 2-aminopyrimidine were reacted with aminopropyl terminated (dimethyl siloxane) oligomers to afford perfectly alternating segmented imide siloxane copolymers. The polymerization was conducted in solvents such as chlorobenzene and chlorofrom. High molecular weight, fully imidized perfectly alternating segmented imide siloxane copolymers were obtained within 2 h at temperatures of 60-110°C. The mechanism of the reaction was further elucidated via model compounds and NMR characterization. The block copolymers exhibited two T_gs due to the microphase separation of the polyimide and polysiloxane phases. The T_g of the polyimide phase was a function of the length of the polyimide block. However, partial phase mixing was also evident from the DSC results on the imide siloxane copolymers prepared with low molecular weight polyimide segments. Thermooxidative stability and tensile properties of the perfectly alternating segmented imide siloxane copolymers were found to be principally dependent on the amount of poly (dimethyl siloxane) incorporated in the copolymer and did not correlate with the poly (dimethyl siloxane) or polyimide block lengths. The stress-strain behavior of both solvent cast films or molded films is also reported. © 1994 John Wiley & Sons, Inc.