Mechanistic Aspects of a Highly Active Dinuclear Zinc Catalyst for the Co‐polymerization of Epoxides and CO2

The dinuclear zinc complex reported by us is to date the most active zinc catalyst for the co‐polymerization of cyclohexene oxide (CHO) and carbon dioxide. However, co‐polymerization experiments with propylene oxide (PO) and CO₂ revealed surprisingly low conversions. Within this work, we focused on clarification of this behavior through experimental results and quantum chemical studies. The combination of both results indicated the formation of an energetically highly stable intermediate in the presence of propylene oxide and carbon dioxide. A similar species in the case of cyclohexene oxide/CO₂ co‐polymerization was not stable enough to deactivate the catalyst due to steric repulsion.     

Synthesis of methyl 2-oxo-5-vinyl-2,5-tetrahydrofuran-3-carboxylate

A synthesis of methyl 2-oxo-5-vinyl-tetrahydrofuran-3-carboxylate involving five synthetic steps from commercially available 3,4-dihydroxybutene is reported.     

Correlated and non-correlated growth kinetics of pentacene in the sub-monolayer regime

We present a study of the growth kinetics of pentacene monolayer islands on SiO₂ in the submonolayer regime by using Atomic Force Microscopy (AFM). Two distinct growth modes, namely correlated growth (CG) and non-correlated growth (NCG), have been identified by Voronoi tesselation. These two modes are characterized by different island growth kinetics. In the case of correlated growth, the average island size 〈A〉 scales with deposition time t i.e. 〈A〉 ∝ t whereas for non-correlated growth, 〈A〉 ∝ t². The CG and NCG regimes are defined by the level of re-evaporation which determines the capture zones around the islands: Wigner-Seitz cells for CG and coronas of width λ_D (λ_D is the mean diffusion distance on SiO₂ before re-evaporation) for NCG. A simple model is proposed to reproduce the experimental growth kinetics in both modes.     

Microsatellite structures in the context of human evolution

Six microsatellite - or short tandem repeat (STR) - systems with uniform repetitive sequences (HumTH01, HumCD4, HumFES/FPS, HumF13B, HumTPO, HumLPL) and three compound repeat systems (HumVWA, HumFIBRA, D21S11) were used, including data from the literature, to determine genetic distances among eight populations worldwide. The TH01- and VWA homologous loci in nonhuman primates (chimpanzees, gorillas, orangutans, rhesus monkeys, ring-tailed lemurs) were compared and found to be shorter than in humans. Microsatellites of lower complexity were most efficient for the separation of major ethnic groups. The loci of higher complexity showed a leveling of the diversity differences among populations, which could be attributed to higher mutation rates.     

Coligand role in the NHC nickel catalyzed C–F bond activation: investigations on the insertion of bis(NHC) nickel into the C–F bond of hexafluorobenzene

The reaction of [Ni(Mes₂Im)₂] (1) (Mes₂Im = 1,3-dimesityl-imidazolin-2-ylidene) with polyfluorinated arenes as well as mechanistic investigations concerning the insertion of 1 and [Ni(ⁱPr₂Im)₂] (1ipr) (ⁱPr₂Im = 1,3-diisopropyl-imidazolin-2-ylidene) into the C–F bond of C₆F₆ is reported. The reaction of 1 with different fluoroaromatics leads to formation of the nickel fluoroaryl fluoride complexes trans-[Ni(Mes₂Im)₂(F)(Ar^F)] (Ar^F = 4-CF₃-C₆F₄2, C₆F₅3, 2,3,5,6-C₆F₄N 4, 2,3,5,6-C₆F₄H 5, 2,3,5-C₆F₃H₂6, 3,5-C₆F₂H₃7) in fair to good yields with the exception of the formation of the pentafluorophenyl complex 3 (less than 20%). Radical species and other diamagnetic side products were detected for the reaction of 1 with C₆F₆, in line with a radical pathway for the C–F bond activation step using 1. The difluoride complex trans-[Ni(Mes₂Im)₂(F)₂] (9), the bis(aryl) complex trans-[Ni(Mes₂Im)₂(C₆F₅)₂] (15), the structurally characterized nickel(i) complex trans-[Ni^I(Mes₂Im)₂(C₆F₅)] (11) and the metal radical trans-[Ni^I(Mes₂Im)₂(F)] (12) were identified. Complex 11, and related [Ni^I(Mes₂Im)₂(2,3,5,6-C₆F₄H)] (13) and [Ni^I(Mes₂Im)₂(2,3,5-C₆F₃H₂)] (14), were synthesized independently by reaction of trans-[Ni(Mes₂Im)₂(F)(Ar^F)] with PhSiH₃. Simple electron transfer from 1 to C₆F₆ was excluded, as the redox potentials of the reaction partners do not match and [Ni(Mes₂Im)₂]⁺, which was prepared independently, was not detected. DFT calculations were performed on the insertion of [Ni(ⁱPr₂Im)₂] (1ipr) and [Ni(Mes₂Im)₂] (1) into the C–F bond of C₆F₆. For 1ipr, concerted and NHC-assisted pathways were identified as having the lowest kinetic barriers, whereas for 1, a radical mechanism with fluoride abstraction and an NHC-assisted pathway are both associated with almost the same kinetic barrier.

A combined experimental and theoretical study on the mechanism of the C–F bond activation of C₆F₆ with [Ni(NHC)₂] is provided.     

An investigation of intermittency in proton-gold, oxygen-gold, sulphur-gold and sulphur-sulphur interactions at 200 GeV per nucleon

The intermittency phenomenon is investigated in proton-gold, oxygen-gold, sulphur-gold and sulphur-sulphur collisions at 200 GeV per nucleon. The data were taken with the NA 35 streamer chamber detector at the CERN SPS. The data samples are carefully corrected for double counting of tracks and for contamination from photon conversions, particle decays and secondary interactions. The analysis is carried out in terms of factorial moments, using a new definition, and of correlation integrals. Both methods show the presence of nonstatistical fluctuations (intermittency). The main conclusions are: The observation of the effect for pairs of hadrons with negative charges and its near absence for pairs of opposite charges is consistent with the assumption that Bose-Einstein correlations yield the dominant contribution. The intermittency effect is not proportional to (dn/dy)^–1 which would be expected in superposition models. The measured relation between the second and third factorial moment for negative hadrons indicates that genuine 3-particle correlations are small. The predictions of a Monte Carlo simulation which is based on the Lund Fritiof model with the inclusion of Bose-Einstein correlations agree with the experimental results.Deceased     

The structure of magnesium alanate

Mg(AlH(4))(2) was produced as a nanocrystalline powder by metathesis of NaAlH(4) and MgCl(2). Starting with a structure estimation which was developed from an evaluation of FTIR data and comparison of structural properties of two solvent adducts, quantum chemical calculations were performed on the density functional theory (DFT) level. The calculated atomic positions were used to simulate an X-ray powder diffraction pattern, based on a trigonal unit cell. The simulated pattern was congruent to experimental data. Thus, magnesium alanate exhibits a CdI(2) layer structure, the layers being formed by Mg atoms occupying the Cd sites and AlH(4) tedrahedra occupying the sites of the iodine atoms in CdI(2).     

Xylose-DNA Containing the Four Natural Bases

Oligonucleotides containing (2′-deoxy-β-D -xylofuranosyl)guanine have been prepared. For this purpose 2-aminoadenosine ( 5 ) was synthesized and converted to 2′-deoxy-β-D -xyloguanosine ( 1 ). The related 2′-deoxy-β-D -xyloisoguanosine ( 3 ) and 2′-deoxy-β-D -xyloxanthosine ( 4 ) were also synthesized. Compound 1 was converted to the phosphonate and phosphoramidite building blocks 10 and 11 , respectively. The oligodeoxynucleotide (5′-3′)d(xG-xT-xA-xG-xA-xA-xT-xT-xC-xT-xA-xC-T) ( 18 ) formed a duplex with the same T_m as the parent (5′-3′)-(G-T-A-G-A-A-T-T-C-T-A-C) ( 19 ), but with an inverted CD spectrum.     

Certification of reference materials and accreditation of reference material producers: Questionable terminology leads to confusion

In the view of the Deutscher Kalibrierdienst (DKD) , a certifying body for reference materials can be considered to be a calibration laboratory. Therefore, accreditation of calibration laboratories in accordance with ISO/IEC 17025 is the most appropriate way to establish confidence in certificates for reference materials. If necessary, the criteria of ISO/IEC 17025 can be tailored to specific cases. There is no need to provide any new kind of reference-material specific accreditation. However, in view of the variety of reference materials and the practice existing in other countries, accreditation of testing laboratories and product certification bodies may optionally be acceptable as long as the same stringent principles with respect to traceability and measurement uncertainty are applied. Such accreditations but not accreditations of reference material producers (ISO Guide 34) are also covered by existing international mutual recognition arrangements (MRA).