Cationic poly(methacryl oxyethyl trimethylammonium) and its poly(ethylene glycol)‐grafted analogue as capillary coating materials in electrophoresis

Cationic polyelectrolytes were synthesized and used as semipermanent coating materials for capillaries in electrophoresis. The polyelectrolytes used were a homopolymer of poly(methacryl oxyethyl trimethylammonium chloride) (PMOTAC) and its poly(ethylene glycol) (PEG)‐grafted analogue. Two PMOTAC polyelectrolytes, with molar masses of 85,000 and 300,000 g/mol, and PEG‐grafted PMOTAC with a molar mass of 280,000 g/mol were synthesized and then characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Attachment of the polyelectrolytes to the wall of the fused silica capillary for electrophoresis caused the electroosmotic flow (EOF) to reverse. The polyelectrolyte coatings were tested over the pH range 2–11 at different buffer ionic strengths, and the most stable and strongest anodic EOFs were obtained at acidic pH values with low ionic strength buffers. Between runs the capillary is merely rinsed for 2 or 3 min with the background electrolyte solution. With the PMOTAC coatings at pH values ≤5, the RSDs of the EOFs were less than 2.9% after 60 injections. The effects of the molar mass of the polycation and of PEGylation of PMOTAC on the interactions between the polycations and basic proteins were studied at acidic pH values. The differences in the effective electrophoretic mobilities, resolution values, and plate numbers of the proteins with the different coatings were due to the EOF, as demonstrated through calculations of reduced mobilities, relative resolution values, and relative plate numbers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2655–2663, 2007     

Dipole strengths in the chlorophylls

Measurements of dipole strengths of chlorophylls in solution are reviewed and correlated. The refractive index dependence is found to be expressible in a simple empirical fashion that does not rely on the concept of vacuum dipole strength. The index dependence in some respects contradicts the dependence expected on the basis of effective field theories.     

Diversity-oriented synthesis of biaryl-containing medium rings using a one bead/one stock solution platform

Diversity-oriented synthesis of structurally complex and diverse small molecules can be used as the first step in a process to explore cellular and organismal pathways. The success of this process is likely going to be dependent on advances in the synthesis of small molecules having natural product-like structures in an efficient and stereoselective manner. The development, scope, and mechanism of the oxidation of organocuprates was investigated and exploited in the atropdiastereoselective synthesis of biaryl-containing medium rings (9-, 10-, and 11-membered rings). The methodology was performed on high-capacity, large polystyrene beads by metalating aryl bromides with i-PrBu(2)MgLi, followed by transmetalating with CuCN x 2LiBr and then oxidizing with 1,3-dinitrobenzene, and was used in a diversity-oriented synthesis of biaryl-containing medium rings (library total theoretical maximum 1412 members). The high capacity beads were arrayed into 384-well plates and, using a process optimized during the development of a one bead/one stock solution technology platform, converted into arrays of stock solutions, with each stock solution containing largely one compound. These stock solutions were used in numerous phenotypic and protein-binding assays. The process described outlines a pathway that we feel will contribute to a comprehensive and systematic chemical approach to exploring biology (chemical genetics).     

Downfalls of Chemical Probes Acting at the Kinase ATP-Site: CK2 as a Case Study

Protein kinases are a large class of enzymes with numerous biological roles and many have been implicated in a vast array of diseases, including cancer and the novel coronavirus infection COVID-19. Thus, the development of chemical probes to selectively target each kinase is of great interest. Inhibition of protein kinases with ATP-competitive inhibitors has historically been the most widely used method. However, due to the highly conserved structures of ATP-sites, the identification of truly selective chemical probes is challenging. In this review, we use the Ser/Thr kinase CK2 as an example to highlight the historical challenges in effective and selective chemical probe development, alongside recent advances in the field and alternative strategies aiming to overcome these problems. The methods utilised for CK2 can be applied to an array of protein kinases to aid in the discovery of chemical probes to further understand each kinase’s biology, with wide-reaching implications for drug development.     

Dark Fermentative Hydrogen Production from Neutralized Acid Hydrolysates of Conifer Pulp

Concentrated acid hydrolysis of cellulosic material results in high dissolution yields. In this study, the neutralization step of concentrated acid hydrolysate of conifer pulp was optimized. Dry conifer pulp hydrolysis with 55?% H₂SO₄ at 45?°C for 2?h resulted in total sugar yields of 22.3?C26.2?g/L. The neutralization step was optimized for solid Ca(OH)₂, liquid Ca(OH)₂ or solid CaO, mixing time, and water supplementation. The highest hydrogen yield of 1.75?mol?H₂/mol glucose was obtained with liquid Ca(OH)₂, while the use of solid Ca(OH)₂ or CaO inhibited hydrogen fermentation. Liquid Ca(OH)₂ removed sulfate to below 30?mg SO₄ ^2?/L. Further optimization of the neutralization conditions resulted in the yield of 2.26?mol?H₂/mol glucose.     

Influence of Ga/(Ga + In) grading on deep‐defect states of Cu(In,Ga)Se2 solar cells

The benefits of gallium (Ga) grading on Cu(In,Ga)Se₂ (CIGS) solar cell performance are demonstrated by comparing with ungraded CIGS cells. Using drive‐level capacitance profiling (DLCP) and admittance spectroscopy (AS) analyses, we show the influence of Ga grading on the spatial variation of deep defects, free‐carrier densities in the CIGS absorber, and their impact on the cell's open‐circuit voltage V_oc. The parameter most constraining the cell's V_oc is found to be the deep‐defect density close to the space charge region (SCR). In ungraded devices, high deep‐defect concentrations (4.2 × 10¹⁶cm^–3) were observed near the SCR, offering a source for Shockley–Read–Hall recombination, reducing the cell's V_oc. In graded devices, the deep‐defect densities near the SCR decreased by one order of magnitude (2.5 × 10¹⁵ cm^–3) for back surface graded devices, and almost two orders of magnitude (8.6 × 10¹⁴ cm^–3) for double surface graded devices, enhancing the cell's V_oc. In compositionally graded devices, the free‐carrier density in the absorber's bulk decreased in tandem with the ratio of gallium to gallium plus indium ratio GGI = Ga/(Ga + In), increasing the activation energy, hindering the ionization of the defect states at room temperature and enhancing their role as recombination centers within the energy band. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Pentaerythrityltetramine scaffolds for solid-phase combinatorial chemistry

Straightforward synthesis for two pentaerythrityltetramine precursors, 2,2-bis(azidomethyl)propane-1,3-diamine (1) and 2-[N-(allyloxycarbonyl)aminomethyl]-2-azidomethylpropane-1,3-diamine (2), has been described. Both propane-1,3-diamines have been attached by reductive amination to a solid-supported backbone amide linker derived from 4-(4-formyl-3,5-dimethoxyphenoxy)butyric acid. The presence of the two methoxy substituents on the linker is essential to avoid cross-linking between two linkers. The remaining free primary amino group of the propane-1,3-diamine moiety may then be selectively acylated with an appropriately protected amino acid using conventional N,N-dicyclohexylcarbodiimide/1-hydroxybenzotriazole (DCC/HOBt) activation without any interference by the secondary amino function. The latter group may be subsequently acylated by an anhydride method. Sequential reduction of the azido group and removal of the allyloxycarbonyl protection from 2 allow further coupling of two different amino acids, and hence, this handle may be utilized in construction of branched structures containing four different amino acids or peptides. Solid-supported 1 may, in turn, be used for the synthesis of similar constructs containing two identical branches. It is worth noting that no acid-labile protecting groups are required in this approach, and hence, this dimension may be saved for the cleavage of the linker. The applicability of the scaffolds to library synthesis has been demonstrated by preparation of 11 pentaerythrityl-branched tetra- and octapeptides.