Buffering effects on the solution behavior and hydrolytic degradation of poly(β-amino ester)s

With a vast, synthetically accessible compositional space and highly tunable hydrolysis rates, poly(β-amino ester)s (PBAEs) are an attractive degradable polymer platform. Leveraging PBAEs in a wide range of applications hinges on the ability to program degradation, which, thus far, has been frustrated by multiple confounding phenomena contributing to the degradation of these charged polyesters. Basic conditions accelerate hydrolysis, yet reduce solubility, limiting water access to amines and esters. Further, the high buffering capacity of PBAEs can render buffers ineffective at controlling solution pH. To unify understanding of PBAE degradation and solution properties, this study examines PBAE hydrolysis as a function of pH and buffer concentration as well as polymer hydrophobicity. At low buffer concentrations, the PBAE amines and the acid produced during hydrolysis control solution pH. Meanwhile, at high buffer concentrations that afford relatively constant pH, hydrolysis rate increases with pH, despite the reduced PBAE solubility. Increasing the hydrophobic content of PBAEs eventually hinders the capacity of the polymer to accept protons from solution, limiting the pH increase and slowing hydrolysis. These studies showcase the role of buffering on the pH-dependent degradation and solution properties of PBAEs, providing guidance for programming degradation in applications ranging from drug delivery to thermosets.     

The existence of Thom classes

In this paper we consider the category of unstable modules over the Steenrod algebra. We prove the existence of finite primary decompositions in this category. Moreover, we prove the existence of Thom classes in noetherian unstable modules, i.e., elements that generate cyclic unstable submodules that are closed under the action of the Steenrod algebra. This in turn leads to the proof of the prime filtration theorem in the category of noetherian unstable modules. As an application we present a proof of the Landweber-Stong conjecture (now a theorem by D. Bourguiba and S. Zarati) that does not make use of the classification of injectives.     

Coriolis耦合对Cl+H2→H+HCl非绝热反应的影响

使用含时波包方法 ,在Capecchi和Werner拟合的非绝热耦合势能面上 ,研究了Cl处在自旋轨道基态以及自旋轨道激发态时与H2 反应的活性 ,并且讨论了Coriolis耦合的影响 .计算了某些角动量时的反应几率 .计算结果显示 ,当Cl原子处在自旋轨道激发态与处在基态的H2 的反应活性很小 ,Coriolis耦合在这个反应中起了很小的作用 .     

将SVRT模型应用到单原子多原子反应F+CH2D2→CH2D/CHD2+DF/HF中

由于含时波包方法具有经典的直观又不乏量子力学的准确 ,选择含时波包方法来处理F +CH2 D2 →CH2 D/CHD2 +DF/HF反应 .把半刚性振转子 (SVRT)模型应用到该反应体系中 ,研究了两个通道中该反应从基态反应物开始在修正过的J1(MJ1)势能面上计算出来了反应几率、积分截面、速率常数 .反应几率随能量变化的图的数值结果给出了振荡结构 ,这些振荡结构是可以和动力学振荡联系起来的 .而这些振荡结构在积分截面随着能量变化的图中就被反应几率求和后的平均结果所掩盖了 .速率常数和实验结果的比较也得到了较好的结果 .     

A short synthesis of 4-amino-3-hydroxybutyric acid (GABOB) via allyl cyanide

4-Amino-3-hydroxybutyric acid was synthesized from allyl cyanide in four steps in an overall yield of 38%. Ultrasonically promoted epoxidation of allyl cyanide with m-chloroperoxybenzoic acid giving oxiranylacetonitrile was used as a key step.     

锂电池Li／KIBr2—非水体系的研究

本非水电池体系由Ｌｉ负极、多孔石墨电极和电解质溶液组成；电解质溶液由无机溶剂ＰＯＣｌ＿３（或有机溶剂硝基苯）和溶解在该溶剂中的活性物质（ＫＩＢｒ＿２）及支持电解质构成。该电池体系的开路电压为８．５０伏左右，放电性能良好，可望在实际中得到应用。此外，对电池体系的反应机理也作了初步的探讨。     

Density functional study of the l-proline-catalyzed α-aminoxylation of aldehydes reaction: The reaction mechanism and selectivity

The reaction mechanism of the l-proline-catalyzed α-aminoxylation reaction between aldehyde and nitrosobenzene has been investigated using density functional theory (DFT) calculation. Our calculation results reveal following conclusions [1]. The first step that corresponds to the formation of C–O bond, is the stereocontrolling and rate-determining step [2]. Among four reaction channels, the syn-attack reaction channel is more favorable than that of the anti one, and the TS-ss channel dominates among the four channels for this reaction in the step of C–O bond formation [3]. The intermolecular hydrogen bond between the acidic hydrogen of l-proline and the N atom of the nitrosobenzene in an early stage of the process catalyzes very effectively the C–O bond formation by a large stabilization of the negative charge that is developing at the O atom along the electrophilic attack [4]. The effect of solvent decreases the activation energy, and also, the calculated energy barriers are decrease with the enhancement of dielectric constants for C–O bond formation step. These results are in good agreement with experiment, and allow us to explain the origin of the catalysis and stereoselectivity for l-proline-catalyzed α-aminoxylation of aldehyde reaction. The addition of H₂O to substituted imine proline, intermolecular proton-transfer steps, and the l-proline elimination process were also studied in this paper.     

Three-dimensional self-assembly of metallic rods with submicron diameters using magnetic interactions

Metallic rods with submicron diameters that contain disklike ferromagnetic sections self-assemble into highly stable, hexagonally close-packed arrays of rods. The rods were fabricated by electrodeposition in porous alumina membranes and comprised alternating sections of gold and nickel. The thicknesses of the ferromagnetic nickel sections were approximately one-half the diameter of the rods (400 nm); this geometry orients the "easy" axis of magnetization perpendicular to the long axis of the rod. After magnetization of the rods with a rare-earth magnet, followed by sonication of the suspension, the rods spontaneously assembled into three-dimensional (3D) bundles that, on average, contained 15-30 rods. A macroscopic model of the rods suggests that the most stable orientation of the magnetic dipoles for rods in a defect-free, hexagonally close-packed arrangement is in concentric rings with the dipoles oriented head-to-tail. This configuration minimizes the energy of the bundle and does not generate a net dipole for the structure. This work provides a simple demonstration that magnetic interactions between ferromagnetic objects can direct and stabilize the formation of ordered, 3D structures by self-assembly.     

Asymmetric dimers can be formed by dewetting half-shells of gold deposited on the surfaces of spherical oxide colloids

Asymmetric dimers consisting of gold microcrystals and spherical silica colloids have been fabricated by depositing thin films of gold onto the spherical colloids to form half-shells, followed by annealing at elevated temperatures. The capability and feasibility of this procedure have been demonstrated with silica and titania beads of 0.2-2 mum in diameter and gamma-Fe2O3/polystyrene@SiO2 core-shell particles 0.5 mum in size. The dimensions of gold microcrystals could be conveniently varied in the range of 100-650 nm by controlling the thickness of gold films and/or the diameter of the spherical colloids. This method provides another route to asymmetric dimers made of colloidal particles that could be different in size, chemical composition, surface functionality, density or sign of surface charge, bulk property, or a combination of these properties.