Functional Groups Assisted Tunable Dielectric Permittivity of Guest-Free Zn-Based Coordination Polymers for Gate Dielectrics

The dielectric properties of coordination polymers has been a topic of recent interest, but the role of different functional groups on the dielectric properties of these polymers has not yet been fully addressed. Herein, the effects of electron-donating (R=NH₂) and electron-withdrawing (R=NO₂) groups on the dielectric behavior of such materials were investigated for two thermally stable and guest-free Zn-based coordination polymers, [Zn(L₁)(L₂)]_n ( 1 ) and [Zn(L₁)(L₃)]_n ( 2 ) [L₁=2-(2-pyridyl) benzimidazole (Pbim), L₂=5-aminoisophthalate (Aip), and L₃=5-nitroisophthalate (Nip)]. The results of dielectric studies of 1 revealed that it possesses a high dielectric constant (κ=65.5 at 1 kHz), while compound 2 displayed an even higher dielectric constant (κ=110.3 at 1 kHz). The electron donating and withdrawing effects of the NH₂ and NO₂ substituents induce changes in the polarity of the polymers, which is due to the inductive effect from the aryl ring for both NO₂ and NH₂. Theoretical results from density functional theory (DFT) calculations, which also support the experimental findings, show that both compounds have a distinct electronic behavior with diverse wide bandgaps. The significance of the current work is to provide information about the structure-dielectric property relationships. So, this study promises to pave the way for further research on the effects of different functional groups on coordination polymers on their dielectric properties.     

Simultaneous Determination of Pioglitazone and Glimepiride by High-Performance Liquid Chromatography

A rapid and accurate HPLC method has been developed for simultaneous determination of pioglitazone and glimepiride. Chromatographic separation of the two pharmaceuticals was performed on a Cosmosil C₁₈ column (150 mm × 4.6 mm, 5 m) with a 45:35:20 (v/v) mixture of 0.01 m triammonium citrate (pH adjusted to 6.95 with orthophosphoric acid), acetonitrile, and methanol as mobile phase, at a flow rate of 1.0 mL min^–1, and detection at 228 nm. Separation was complete in less than 10 min. The method was validated for linearity, accuracy, precision, limit of quantitation, and robustness [1, 2]. Linearity, accuracy, and precision were found to be acceptable over the ranges 2.50–30.00 g mL^–1 for pioglitazone and 0.10–10.00 g mL^–1 for glimepiride.     

Plasmon‐Enhanced Photocurrent Generation from Click‐Chemically Modified Graphene

The visible‐light response of Au nanoparticles (AuNPs) assembled on rGO through different molecular bridges was investigated by transient photocurrent generation. We prepared rGO with two self‐assembled monolayers (SAMs), one linear and the other with aromatic triazoles through a click cycloaddition reaction. A fivefold photocurrent enhancement was observed for triazole linkers over the aminopropyltrimethoxysilane (APTMS) linker. Cyclic voltammetry (CV) and impedance measurements also suggest fast electron transfer on account of the low resistance offered by the click‐modified rGO surface whereby introduction of triazoles offers the efficient bridge between the donor AuNPs and acceptor rGO.     

Low temperature electrical transport in Ag substituted LaMnO3 polycrystalline pellets prepared by a pyrophoric method

A detailed investigation of the electrical resistivity of a series of monovalent (Ag) doped polycrystalline La_1−xAg_xMnO₃ pellets with x ranging from 0.05 to 0.30 and measured over the temperature range between 10 and 350 K is reported. La_1−xAg_xMnO₃ compounds have been prepared by a novel pyrophoric technique. XRD analysis of our samples indicates single phasic nature for samples with Ag content ≤0.15, while samples with higher Ag content (x≥0.2) show presence of both magnetic perovskite and non-magnetic Ag phases. A sharp insulator-metal transition with T_MI close to room temperature arising out of the paramagnetic to ferromagnetic transition, and a large magneto-resistance (MR=∼16%) near T_MI has been observed for all the Ag doped samples. Between T_C(T_p1) and 350 K, all the samples show activated conduction following the Emin-Holstein theory of adiabatic small polaron hopping, while at lower temperatures, in the ferromagnetic regime resistivity appears to be governed by various electron scattering processes. Between 20 and 50 K, a distinct minimum for both H=0 and has been observed, which is explained in terms of inelastic scattering and electron-electron interactions.     

Determination of Band Structure Parameters and the Quasi‐Particle Gap of CdSe Quantum Dots by Cyclic Voltammetry

Band structure parameters such as the conduction band edge, the valence band edge and the quasi‐particle gap of diffusing CdSe quantum dots (Q‐dots) of various sizes were determined using cyclic voltammetry. These parameters are strongly dependent on the size of the Q‐dots. The results obtained from voltammetric measurements are compared to spectroscopic and theoretical data. The fit obtained to the reported calculations based on the semi‐empirical pseudopotential method (SEPM)—especially in the strong size‐confinement region, is the best reported so far, according to our knowledge. For the smallest CdSe Q‐dots, the difference between the quasi‐particle gap and the optical band gap gives the electron–hole Coulombic interaction energy (J_e1,h1). Interband states seen in the photoluminescence spectra were verified with cyclic voltammetry measurements.     

A fast, inexpensive, and safe method for residue analysis of meptyldinocap in different fruits by liquid chromatography/tandem mass spectrometry

An analytical method is reported for residue analysis of the fungicide meptyldinocap in different fruit matrixes that involves extraction with ethyl acetate, hydrolysis of the residues with ethanolamine, and determination by LC/MS/MS. The method involves extraction of 10 g sample with 10 mL ethyl acetate; evaporation of the ethyl acetate phase to dryness, and subsequent hydrolysis of the residues to 4,6-dinitro-2-(1-methylheptyl) phenol on reaction with 1% ethanolamine. The pH of this hydrolyzed product was neutralized with formic acid and analyzed by LC/MS/MS. The hydrolysis reaction followed pseudo-first-order kinetics, and the reaction product was spectroscopically confirmed as 2-(1-methylheptyl)-4,6-dinitrophenol. The method offered > 80% recoveries at an LOQ of 10 ng/g for grape and mango, 25 ng/g for pomegranate with intralaboratory Horwitz ratio < 0.5, and measurement uncertainties < 10% at LOQ levels. Considering first-order rate kinetics, activation energy, enthalpy of activation, and entropy of activation varied as solvent > mango > grape > pomegranate. Free energy of activation at 298 K was higher than at 280 K and was similar for solvent and three matrixes at both temperatures.     

Cyanex272 impregnated on Amberlite XAD-2 for separation and preconcentration of U(VI) from uranmicrolite (leachates) ore tailings

An organanophosphinic acid extractant Cyanex272 was impregnated on a macroporus polymeric solid support Amberlite XAD-2 and packed in a column to study sorption and desorption of U(VI) in HNO₃ media. Various physio-chemical parameters such as influence of HNO₃ concentration, amount of Cyanex272, nature of eluents, sample and eluent flow rates were studied systematically to optimize conditions for sorption and desorption of U(VI). The breakthrough volume for U(VI) was >1000 mL and column reusability was more than 50 cycles. U(VI) was selectively separated from some commonly associated rare earth elements and certain d-block elements in binary and synthetic mixtures. The method developed for U(VI) was applied for its recovery from uranmicrolite (leachate) ore tailings and an industrial effluent sample.     

Synthesis of silver nanoparticles in an aqueous suspension of graphene oxide sheets and its antimicrobial activity

A solution-based approach to the synthesis of silver (Ag) nanoparticles by chemical reduction of AgNO(3) in a graphene oxide (GrO) suspension is demonstrated. X-ray diffraction and transmission electron microscopy indicate that the Ag nanoparticles, of size range 5-25nm, were decorated on the GrO sheets. The size and shape of the Ag nanoparticles are dependent on the concentration of the AgNO(3) solution. Antimicrobial activity of such hybrids materials is investigated against the Gram negative bacteria Escherichia coli and Pseudomonous aeruginosa. The bacterial growth kinetics was monitored in nutrient broth supplemented with the Ag nanoparticle-GrO suspension at different conditions. It was observed that P. aeruginosa is comparatively more sensitive to the Ag nanoparticle-GrO suspension.     

Methotrexate intercalated ZnAl-layered double hydroxide

The anticancerous drug methotrexate (MTX) has been intercalated into an ZnAl-layered double hydroxide (LDH) using an anion exchange technique to produce LDH-MTX hybrids having particle sizes in the range of 100-300 nm. X-ray diffraction studies revealed increases in the basal spacings of ZnAl-LDH-MTX hybrid on MTX intercalation. This was corroborated by the transmission electron micrographs, which showed an increase in average interlayer spacing from 8.9 Å in pristine LDH to 21.3 Å in LDH-MTX hybrid. Thermogravimetric analyses showed an increase in the decomposition temperature for the MTX molecule in the LDH-MTX hybrid indicating enhanced thermal stability of the drug molecule in the LDH nanovehicle. The cumulative release profile of MTX from ZnAl-LDH-MTX hybrids in phosphate buffer saline (PBS) at pH 7.4 was successfully sustained for 48 h following Rigter-Peppas model release kinetics via diffusion.