Spectrophotometric Determination of Rhenium(IV) with Thiocyanate,TX-100 and N,N′-Diphenylbenzamidine

A spectrophotometric method to determine rhenium(IV) at trace level is based on the extraction of Re(IV)-SCN^? complex in sulphuric acid media with N,N′-diphenylbenzamidine(DPBA) in presence of a non-ionic surfactant triton X-100 (TX-100) in chloroform. The complex shows maximum absorbance at 435 nm with amolar absorptivity value of 4.24 × 10⁴ L mol^?1 cm^?1 at an acidity range 3.5-6.5 M H₂SO₄. The method followed Beer's Law for the system Re(IV)-SCN^?(TX-100)-DPBA upto 4.0 μg Re(IV) mL^?1. The detection limit of the method is 5 ppb. None of the tested foreign ions, except molybdenum(VI), interfere with the determination of rhenium. The interference due to molybdenum could effectively be removed by prior precipitation with oxine. The effect of various analytical parameters on the extraction of the metal are discussed.     

Use of ultra-filtration in organic-rich groundwater for the physical separation of thorium

During this work, size fractionation technique “ultra filtration” is used in physical speciation of thorium in organic rich groundwater. Laboratory simulated experiments were carried out to study the physical speciation of thorium in aquatic environment having elevated level of dissolved humus material classified as dissolved organic carbon (DOC). Samples were collected from organic rich environment having DOC in the range of 50–60 µg mL^?1. Th(IV) ions are extremely particle reactive having K _d value of the order of 10^5–6, hence to avoid adsorption on suspended particulate matter, spiking of the solution with Th(NO₃)₄ was carried out in ground water samples after filtering through 450 nm pore size using suction filtration. Particles in dissolved state (colloids) ranging between <450 and >220 nm were separated using suction filtration assembly having a membrane with a pore diameter of 220 nm. Thereafter, solution was sequentially passed through the ultra-filtration membranes having pore diameters of 14 nm [300 k NMWL (nominal molecular weight limit)], 3.1 nm (50 k NMWL), 2.2 nm (30 k NMWL), 1.6 nm (10 k NMWL) and 1.1 nm (0.5 k NMWL) by using “Stirred Ultra-filtration Cells”, operating in concentration mode. Thorium has only one stable oxidation state i.e. IV, under all redox conditions in natural waters and therefore, its speciation is dominated by its interaction with various fractions of DOC. Experimental results show 50–60 % of the spiked Th is in association with fraction enriched with particles of 10 k NMWL (1.6 nm) followed by fraction enriched with particle of 0.5 k NMWL and <220 nm.     

A green four-component synthesis of zwitterionic alkyl/benzyl pyrazolyl barbiturates and their photophysical studies

A novel series of unsymmetrically substituted alkyl/benzyl pyrazolyl barbiturates incorporating highly biologically active pyrazolone and barbiturate moieties was synthesized by four-component reactions of a mixture of ethyl acetoacetate, hydrazine hydrate, aldehydes and barbituric acid/thiobarbituric acid in ethanol without using a catalyst. The photophysical properties of the newly designed alkyl/benzyl pyrazolyl barbiturates were studied, and good quantum yield of some products indicated a definitive scope in the field of biochemical applications. Single-crystal X-ray crystallographic studies revealed that the newly synthesized compounds exist in zwitterionic form. The zwitterionic nature of the new chimera makes them interesting candidates for drug delivery as zwitterionic drugs are known to have highly water soluble properties, specific protein absorption, slow recognition by immune system, slow blood clearance from body and can constantly diffuse and deposit throughout the physiological pH.     

Amberlyst A21: A reusable solid catalyst for green synthesis of pyran annulated heterocycles at room temperature

Amberlyst A21, a neutral ion-exchange resin and a solid base, can catalyze the three-component reaction of aldehyde and malononitrile with various active methylene compounds at room temperature to synthesize a range of pharmaceutically important pyran annulated heterocycles. Use of the solid base could generate a highly green protocol by eliminating chromatographic purification that involves hazardous organic solvents, and facilitate easy recovery and reusability of the catalyst.     

Rapid,efficient and solvent-free synthesis of (un)symmetrical xanthenes catalyzed by recyclable sulfated polyborate

The present study describes a rapid, simple and straightforward approach to the synthesis of 1,8-dioxo-octahydroxanthenes, 14-phenyl-14H-dibenzo[a,j]xanthene and tetrahydrobenzoxanthene-11-ones under solvent-free conditions using sulfated polyborate as a highly efficient catalyst. The procedure offers several advantages including cleaner reaction profile, mild reaction condition, economic, recyclable and environmentally benign catalyst, high yields, simple experimental and workup procedures. While non-extractive work up/purification, along with reusability of catalyst make this method economically affordable for large scale.     

Imprinted silica nanoparticles coated with N‐propylsilylmorpholine‐4‐carboxamide for the determination of m‐cresol in synthetic and real samples

m‐Cresol‐imprinted silica nanoparticles coated with N‐propylsilylmorpholine‐4‐carboxamide have been developed that contain specific pockets for the selective uptake of m‐cresol. Silica nanoparticles were synthesized by a sol–gel process followed by functionalization of their surface with N‐propylsilylmorpholine‐4‐carboxamide. The formation of m‐cresol‐imprinted silica nanoparticles was confirmed by UV‐Vis spectrophotometry, infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. Electron microscopic studies revealed the formation of monodispersed imprinted silica nanoparticles with spherical shape and an average size of 83 nm. The developed nanoparticles were filled in a syringe and used for the extraction of m‐cresol from aqueous samples followed by quantification using high‐performance liquid chromatography with diode array detection. Various adsorption experiments showed that developed m‐cresol‐imprinted silica nanoparticles exhibited a high adsorption capacity and selectivity and offered a fast kinetics for rebinding m‐cresol. The chromatographic quantification was achieved using mobile phase consisting of acetonitrile/water (70:30 v/v) at an isocratic flow rate of 1.0 mL/min using a reversed‐phase C₁₈ column and detection at λ_max = 275 nm. The limits of detection and quantification were 1.86 and 22.32 ng/mL, respectively, for the developed method. The percent recoveries ranged from 96.66–103.33% in the spiked samples. This combination of this nanotechnique with molecular imprinting was proved as a reliable, sensitive and selective method for determining the target from synthetic and real samples.     

Saccharomyces cerevisiae catalyzed one-pot three component synthesis of 2,3-diaryl-4-thiazolidinones

Saccharomyces cerevisiae (baker’s yeast) catalyzed one-pot three component cyclocondensation of aryl aldehydes, amines, and thioglycolic acid in organic medium leading to 2,3-diaryl 4-thiazolidinones has been carried out for the first time.