The fluorobasicities of ReF7 and IF7 as measured by the enthalpy change ΔH°(EF7(g) → EF6+(g) + F−(g))

Iridium hexafluoride oxidizes ReF₆ (via an ReF₆⁺ salt) and at room temperatures IrF₆, ReF₆, ReF₇ and (IrF₅)₄ are each present in the equilibrium mixture. From these and related findings: ΔH°(ReF₆ → ReF₆⁺ + e^?) 1092 ± 27 kj mole^?1(261 ± 6 kcal mole^?1), and thermodynamic data are selected to yield ΔH°(ReF_7(g) → ReF₆⁺_(g) + F^?_(g))=893 ± 33 kj mole^?1(213 ± 8 kcal mole^?1). From observations on the stability of IF₆⁺BF₄^? and the lattice enthalpy evaluation for the salt, ΔH°(IF_7(g) → IF₆⁺_(g) + F^?_(g))= 870 ± 24 kj mole^?1(208 ± 6 kcal mole^?1).     

Coaxially gated in-wire thin-film transistors made by template assembly

Nanowire field effect transistors were prepared by a wet chemical template replication method using anodic aluminum oxide membranes. The membrane pores were first lined with a thin SiO2 layer by the surface sol-gel method. Au, CdS (or CdSe), and Au wire segments were then sequentially electrodeposited within the pores, and the resulting nanowires were released by dissolution of the membrane. Electrofluidic alignment of these nanowires between source and drain leads and evaporation of gold over the central CdS (CdSe) stripe affords a "wrap-around gate" structure. At VDS = -2 V, the Au/CdS/Au devices had an ON/OFF current ratio of 103, a threshold voltage of 2.4 V, and a subthreshold slope of 2.2 V/decade. A 3-fold decrease in the subthreshold slope relative to that of planar nanocrystalline CdSe devices can be attributed to coaxial gating. The control of dimensions afforded by template synthesis should make it possible to reduce the gate dielectric thickness, channel length, and diameter of the semiconductor segment to sublithographic dimensions while retaining the simplicity of the wet chemical synthetic method.     

Salt‐Based Organic–Inorganic Nanocomposites: Towards A Stable Lithium Metal/Li10GeP2S12 Solid Electrolyte Interface

Solid‐state Li metal battery technology is attractive, owing to the high energy density, long lifespans, and better safety. A key obstacle in this technology is the unstable Li/solid‐state electrolyte (SSE) interface involving electrolyte reduction by Li. Herein we report a novel approach based on the use of a nanocomposite consisting of organic elastomeric salts (LiO‐(CH₂O)_n‐Li) and inorganic nanoparticle salts (LiF, ‐NSO₂‐Li, Li₂O), which serve as an interphase to protect Li₁₀GeP₂S₁₂ (LGPS), a highly conductive but reducible SSE. The nanocomposite is formed in situ on Li via the electrochemical decomposition of a liquid electrolyte, thus having excellent chemical and electrochemical stability, affinity for Li and LGPS, and limited interfacial resistance. XPS depth profiling and SEM show that the nanocomposite effectively restrained the reduction of LGPS. Stable Li electrodeposition over 3000 h and a 200 cycle life for a full cell were achieved.     

Anodic electrodeposition of highly oriented zirconium phosphate and polyaniline-intercalated zirconium phosphate films

Films of highly oriented alpha-zirconium phosphate and polyaniline-intercalated zirconium phosphate with controllable thickness in the micrometer range were grown anodically on Pt electrodes. To optimize the electrodeposition conditions, the exfoliation of alpha-zirconium phosphate by tetrabutylammonium (TBA) salts was investigated in several nonaqueous solvents. Acetonitrile was found to be the best solvent for making crack-free, oriented films because of its high vapor pressure, low viscosity, and relatively high permittivity. With TBA salts of neutral or weakly acidic anions (TBACl, TBABr, TBAI, TBA(HSO4), or TBA(H2PO4)), full exfoliation did not occur and alpha-zirconium phosphate and/or polyaniline were deposited as rough films. With basic anions (TBAF or TBAOH), dense, adherent films were obtained. X-ray diffraction patterns of the films showed that they were highly oriented along the stacking axis. The thickness could be controlled, up to about 40 microm, by limiting the time of the electrodeposition reaction. At monomer concentrations below 1.0 x 10(-2) mol/dm3, the emeraldine form of the intercalated polymer was obtained. Electrodeposition thus provides a thick film alternative to layer-by-layer assembly for intercalation compounds of alpha-zirconium phosphate with a conducting polymer.     

Dense layers of vertically oriented WO3 crystals as anodes for photoelectrochemical water oxidation

Films of crystalline WO(3) nanosheets oriented perpendicular to tungsten substrates were grown by a surfactant-free hydrothermal method, followed by sintering. The films exhibit photoelectrochemical oxygen evolution at low overpotential.     

Porous Calcium Hydroxyapatite as an Efficient Catalyst for Synthesis of Pyrazolines via 1,3‐Dipolar Cycoloaddition Under Solvent‐Free Microwave Irradiation

Adsorbed on porous calcium hydroxyapatite, 1,3‐dipolar cycloaddition of diphenylnitrilimine on olefins is readily catalyzed under solvent‐free microwaves irradiation. The pyrazolines are obtained in few minutes with high yields. Specific surface of porous calcium hydroxyapatite and microwaves effects are discussed.     

Template-grown metal nanowires

The growth of metal nanowires using membranes as hard templates is reviewed. The method provides access to arrays of single-crystal metal nanowires and to quasi-one-dimensional metal nanostructures with controlled compositional variation along their length. Recent applications of these kinds of nanowires to problems in superconductivity, optical spectroscopy and sensing, and catalytic conversion of chemical to mechanical energy are reviewed.     

Chemical locomotion

Research into the autonomous motion of artificial nano- and microscale objects provides basic principles to explore possible applications, such as self-assembly of superstructures, roving sensors, and drug delivery. Although the systems described have unique propulsion mechanisms, motility in each case is made possible by the conversion of locally available chemical energy into mechanical energy. The use of catalysts onboard can afford nondissipative systems that are capable of directed motion. Key to the design of nano- and micromotors is the asymmetric placement of the catalyst: its placement in an environment containing a suitable substrate translates into non-uniform consumption of the substrate and distribution of reaction products, which results in the motility of the object. These same principles are exploited in nature to effect autonomous motion.     

Catalytic micropumps: microscopic convective fluid flow and pattern formation

As innovations continue to be made in the fields of microfluidics and the colloidal assembly, new strategies for moving particles and fluids may be needed. Heterogeneous catalysis provides means of locally converting the stored chemical energy of fuels to mechanical energy. We report an ambient temperature stationary "pump" that generates a proton concentration gradient through the bipolar electrochemical decomposition of hydrogen peroxide on patterned silver-gold surfaces. The resulting electric field drives convective fluid flow and pattern formation of colloidal tracer particles at the microscopic level by a combination of electroosmotic and electrophoretic forces.