THE -PROBLEM FOR HOLOMORPHIC (0,2)-FORMS ON PSEUDOCONVEX DOMAINS IN SEPARABLE HILBERT SPACES AND D.F.N. SPACES

51. IntroductionL. H5.m.nd..l3] solved the 0problem by using the L2-estimates for partial differentialoperators in C'.. J. Kajiwara[4] studied infinite dimensional generalizations of the poten-tial kernel. Concerning the 0-problem in infinite dimensional spaces, P. ffeb.i.lll] investi-gated the a-equation for coc (o, 1)-forms in arbitrary pseudoconvex open subsets of separableHilbert spaces without growth condition. J. F. Colombeau and B. Perr.t[l1 showed that aCoc solution u of 0u = w ca…     

ON THE ACOUSTIC ABSORPTION OF MULTI-LAYER ABSORBERS WITH DIFFERENT INNER STRUCTURES

A rigorous finite element analysis procedure is developed to study the effect of the inner structures on the acoustic absorption of multi-layer absorbers. To do this, four types of basic inner structure compartments adopted in the multi-layer absorbers are selected for analysis. These compartments are composed of porous materials inlaid with perforated plates of various shapes, say, triangle, semicircle, convex rectangle and plate shapes. As it is different from the conventional finite element analysis for the acoustic system in the literature, the perforated plates are simulated by appropriate equivalent boundary conditions, depending on their thickness, hole radius, hole pitch and porosity and the air contained in the holes. A large number of total degrees of freedom generated from meshing the air in the holes of perforated plates are thus avoided. The results reveal that the inner structures of the multi-layer absorbers will influence the acoustic absorption at some frequency bands significantly. Based on those features, the multi-layer absorber with a novel inner structure is then designed and manufactured. Both the finite element and experimental results show that its acoustic absorption would be distinctly promoted.     

核介质中五夸克奇特重子态Θ+的有效质量

利用非线性s-w-r模型，在相对论平均场近似下，通过能量密度函数，给出了五夸克奇特重子态Q+有效质量随核密度的增加逐渐下降的依赖关系，并进行了数值计算.分析了不同参数对核物质中Q+有效质量的影响，并考虑了耦合系数中GQ/B的3个不同值，计算了不同耦合系数对Q+有效质量的影响.     

自由曲面光学虚拟制造与检测系统的探讨

自由曲面光学产品设计、制造与检测的工艺流程，通常采取试凑法逐次逼近。由于加工 检测 再加工，循环往复，既费时，成本又高，产生了瓶颈问题。为了解决此弊端，本文运用虚拟制造技术，提出光学虚拟制造的基本构想，即虚拟制造系统结构模型，给出光学系统虚拟原型的构成和光学系统成像质量虚拟检测系统的构成，讨论光学成像质量的仿真检测以及敏度分析方法。研究结果表明：运用虚拟制造与检测技术，可缩短研发周期，降低成本，优化工艺并提高产品质量。     

Pentaquark Θ+的介质效应

在密度相关的相对论平均场理论基础上, 假定Θ⁺通过交换有效的同位旋标量介子σ和ω与其他重子发生相互作用, 研究了强子在包含Θ⁺的奇异核物质中的性质改变. 讨论并计算了介质中的Θ⁺和核子有效质量及其对重子密度的依赖关系, 分析了Θ⁺在核物质中包含的成分大小以及核子的同位旋效应对奇异核物质性质的影响, 进一步计算了不同重子组成比例下奇异核物质的标量密度ρ_S和矢量密度ρ_B的对应曲线.     

Average Property of Isospin Effects Induced by Neutron-Halo Nuclei

We study the average property of the isospin effects of reaction mechanism induced by neutron-halo nuclei within the isospin-dependent quantum molecular dynamics model. We find that the extended neutron density distribution for the neutron-halo projectile brings an important isospin effect into the reaction mechanism, which induces the decrease of nuclear stopping R; however, it induces the obvious increases of the neutron-proton ratio of nucleon emissions （n/p）nucl for all of the beam energies in this work, compared to the same mass stable colliding system.     

REASSESSMENT OF THE DIFFERENTIAL EFFECTS OF ULTRAVIOLET AND IONIZING RADIATION ON HIV PROMOTER: THE USE OF CELL SURVIVAL AS THE BASIS FOR COMPARISONS

Abstract: Effects of different radiation treatments on the human immunodeficiency virus-1 (HIV) promoter were reassessed for exposures comparable to those encountered in clinical or cosmetic practice, using survival of the host cell as a basis for comparisons. The exposures were performed with two ultraviolet radiation sources commonly used as medical or cosmetic devices (UVASUN 2000 and FS20 lamps), a germicidal (G15T8) lamp and an X-ray machine. The UVC component of the FS20 lamp was filtered out. The emission spectra of the lamps were determined. The characteristics of these sources allowed us to discriminate among effects of UVA1 (340–400 nm), UVB + UVA2 (280–340 nm) and UVC (254 nm) radiations. Effects of irradiation were ascertained using cultures of HeLa cells stably transfected with the HIV promoter linked to a reporter—chloramphenicol acetyl transferase—gene. The exposures used caused at least two logs of cell killing. In this cytotoxicity range, UVA1 or X radiations had no effect on the HIV promoter, whereas UVB + UVA2 or UVC radiations activated the HIV promoter in a fluence-dependent manner. Survivals following exposure to UVB + UVA2 or UVC radiation were (1) at the lowest measurable HIV promoter activation, 30 and 20%, respectively, (2) at one-half maximal activation, 6 and 3%, respectively and (3) at the maximal activation, 0.5 and 0.2%, respectively. The results suggest that, among the radiations studied, UVB is the most important modality from the viewpoint of its potential effects on HIV-infected individuals, since (1) UVA1 or X radiations have no effects on the HIV promoter, (2) human exposure to UVC radiation is infrequent and (3) human UVB exposure is very common.     

尿素法合成高结晶度类水滑石

尿素的高温分解特性被用于控制层状化合物合成过程中的pH值。室温下尿素可与硝酸盐形成均一溶液，当其高温分解时可以保证溶液内部各点的pH值始终一致，因而可获得高结晶度的水滑石样品。利用该法可合成出Mg-Al、Zn-Al及Ni-Al类水滑石，但难以合成出Co-Al，Mn-Al及Co-Cr类水滑石，相信这与不同金属离子发生沉淀时所需的pH值有关。     

Development of an RPLC-based Method for Measurement of Indoprofen Stability and Validation of the Method

A method for quantitative measurement of the photochemical decomposition of the anti-inflammatory agent, indoprofen （INP） is descriped. An RPLC-based assay that could determine the extent of degradation of INP in a rapid, sensitive, and accurate manner was developed. The method was validated under photoirradiation. Quantitation was monitored with an Inertsil ODS-3V column using a mobile phase of acetonitril and 1% HOAc solution in deionized H2O. Statistics relevant to the system criteria, peak integrity and resolution among the parent drug and its degradation products were performed. From the intra- and inter-day tests, the coefficients of variation were found to range from 0.59% to 4.25% for the former and from 0.71% to 4.86% for the latter. The good selectivity and specificity of this RPLC-based procedure render it suitable for measurements of INP stability.     

SPECTRAL CHARACTERISTICS OF THE EXCITED STATES OF THE PRODUCT OF THE CHEMILUMINESCENCE OF LUMINOL*

Abstract— In dimethylsulfoxide the emission spectrum of luminol chemiluminescence is red-shifted by 300 cm^-1 from the photoexcited fluorescence of the product 3-aminophthalate dianion, while in aqueous solvent the two spectra are identical. The spectral properties of the product dianion have been measured in aqueous solvent and in a number of aprotic solvents, both at room temperature and at 77°K. The ground states and the excited states from which emissions are observed are characterized. Two alternatives are presented to explain the aprotic emission spectra.