A nucleophilic substitution reaction in microemulsions based on either an alcohol ethoxylate or a sugar surfactant

A nucleophilic substitution reaction between 4-tert-butylbenzyl bromide and a series of iodide salts has been performed in oil-in-water microemulsions based on either a fatty alcohol ethoxylate or a sugar surfactant. The reaction kinetics was compared with the kinetics of the same reaction performed in a microhomogeneous reaction medium, d-MeOH. Previous results showing a particularly high reactivity in the microemulsion based on the fatty alcohol ethoxylate was confirmed. It was shown that in both microemulsions the reaction rate was almost independent of the choice of counterion to iodide. This indicates that complexation of the cation with the surfactant headgroup, which, in particular, could have taken place with surfactants containing oligooxyethylene chains (a “crown ether effect”), seems not to be of importance.

¹²⁷I NMR studies, as well as quadrupole splitting experiments performed by ²H NMR, indicate that there is a certain accumulation of iodide at the oil–water interface of the microemulsions. It is difficult to draw any quantitative conclusions in this respect, however.

The results obtained in this study, combined with results from previous investigations of the same reaction, indicate that the unexpectedly high reactivity obtained in the microemulsion based on a surfactant containing an oligooxyethylene headgroup is most probably due to the nucleophile being poorly solvated when present in the headgroup layer of such a microemulsion. Poorly solvated anions are known to be highly reactive nucleophiles.     

Sparse generalized Fourier transforms

Block-diagonalization of sparse equivariant discretization matrices is studied. Such matrices typically arise when partial differential equations that evolve in symmetric geometries are discretized via the finite element method or via finite differences. By considering sparse equivariant matrices as equivariant graphs, we identify a condition for when block-diagonalization via a sparse variant of a generalized Fourier transform (GFT) becomes particularly simple and fast. Characterizations for finite element triangulations of a symmetric domain are given, and formulas for assembling the block-diagonalized matrix directly are presented. It is emphasized that the GFT preserves symmetric (Hermitian) properties of an equivariant matrix. By simulating the heat equation at the surface of a sphere discretized by an icosahedral grid, it is demonstrated that the block-diagonalization is beneficial. The gain is significant for a direct method, and modest for an iterative method. A comparison with a block-diagonalization approach based upon the continuous formulation is made. It is found that the sparse GFT method is an appropriate way to discretize the resulting continuous subsystems, since the spectrum and the symmetry are preserved. AMS subject classification (2000)  43A30, 65T99, 20B25     

Phase-transfer agents as catalysts for a nucleophilic substitution reaction in microemulsions

The reaction between 4-tert-butylbenzyl bromide and potassium iodide was carried out in microemulsions based on different nonionic surfactants, and the reaction rates were compared with those obtained in two-phase systems with added phase-transfer agent, either a quaternary ammonium salt or a crown ether. The reactions were relatively fast in the microemulsions and extremely sluggish in the two-phase systems without additional phase-transfer agent. Addition of a phase-transfer agent did not accelerate the reaction when a hydrocarbon was used as organic solvent, neither in the two-phase system nor in the microemulsion. When a chlorinated hydrocarbon was used as solvent, phase-transfer catalysis became effective and the rate obtained in the two-phase system with an equimolar amount of phase-transfer agent added was higher than that obtained in the microemulsion. When a catalytic amount of phase-transfer agent was used, the rate in the two-phase system was about the same as the rate obtained in the microemulsion without the phase-transfer agent. The combined approach, that is, use of a microemulsion as the reaction medium and addition of a phase-transfer agent, gave the highest reaction rate. The quaternary ammonium salt (tetrabutylammonium hydrogen sulfate) was a more efficient catalyst in the microemulsion system than the crown ether ([18]crown-6).     

Micellar behavior in solutions of bile-acid salts

Summary The density, electrical conductivity, viscosity, lightscattering and the low-angle X-ray diffraction have been examined in the solution region of the ternary systems of sodium cholate or desoxycholate and n-decanol and water at 20°. The phase diagrams show a continuous transition from homogeneous solutions of bile-acid salt in water to homogeneous solutions of bile-acid salt and water in decanol. Along the bile-acid salt-water axis there are micellar solutions containing micelles of the normal type where the polar groups are directed outwards, and these micelles can solubilize decanol without initially undergoing any change in their basic structure. Above a critical value, however, the micellar structure is determined by the decanol molecules, and at large decanol contents there is an inversion that results in the formation of reversed micelles, with the polar groups and water now located within the core of the micelles.

---

Zusammenfassung Dichte, elektrische Leitfähigkeit, Viskosität, Lichtstreuung und Kleinwinkelstreuung von Röntgenstrahlen wurden im Lösungsgebiet der ternären Systeme Natriumcholat bzw. Natriumdesoxycholat, n-Dekanol und Wasser studiert. Das Phasendiagramm zeigt einen kontinuierlichen Übergang von der homogenen Gallensalzlösung in Wasser bis zur homogenen Lösung von Gallensalz und Wasser in Dekanol. Entlang der Gallensalz-Wasserachse kommen mizellare Lösungen vor, die Mizellen vom normalen Typ enthalten, bei denen die polaren Gruppen nach außen gerichtet sind. Diese Mizellen können recht große Mengen Dekanol solubilisieren, ohne daß ihre Grundstruktur verändert wird. Oberhalb einer kritischen Menge bestimmen jedoch die Dekanolmoleküle die Mizellstruktur. Bei großen Mengen Dekanol erfolgt eine Umstrukturierung, die zur Bildung von Mizellen mit den polaren Gruppen im Mizellkern führt.

     

Solution behavior of a surfactant aldehyde–the oxidation product of an alcohol ethoxylate

It has previously been shown that alcohol ethoxylates readily undergo autoxidation and that one of the major oxidation products is the surfactant aldehyde, i.e. an ethoxylate carrying a –CH₂CHO group at the terminal end of the polyoxyethylene chain. In this work the cloud point, phase behavior and aggregation characteristics of the surfactant aldehyde produced by oxidation of C₁₂H₂₅(OCH₂CH₂)₅OH (C₁₂E₅) are determined and compared with the values obtained with the parent surfactant. It was found that the physico–chemical behavior of the two species was very similar, which indicates that a considerable portion of the aldehyde group is in hydrated state, i.e. the surfactant aldehyde consists of a mixture of aldehyde in carbonyl form and the corresponding geminal diol. The cloud point of the surfactant aldehyde decreased rapidly with time, even when it was stored at low temperature. Also the parent surfactant and its homologue C₁₂E₆ exhibited a decrease in cloud point during storage. For instance, a 1% aqueous solution of C₁₂E₆ showed a cloud point decrease from 62 to 32°C after 4 months storage at 40°C. Such a change in solution behavior can have important practical implications.     

Enzymes immobilized in mesoporous silica: A physical–chemical perspective

Mesoporous materials as support for immobilized enzymes have been explored extensively during the last two decades, primarily not only for biocatalysis applications, but also for biosensing, biofuels and enzyme-controlled drug delivery. The activity of the immobilized enzymes inside the pores is often different compared to that of the free enzymes, and an important challenge is to understand how the immobilization affects the enzymes in order to design immobilization conditions that lead to optimal enzyme activity. This review summarizes methods that can be used to understand how material properties can be linked to changes in enzyme activity. Real-time monitoring of the immobilization process and techniques that demonstrate that the enzymes are located inside the pores is discussed by contrasting them to the common practice of indirectly measuring the depletion of the protein concentration or enzyme activity in the surrounding bulk phase. We propose that pore filling (pore volume fraction occupied by proteins) is the best standard for comparing the amount of immobilized enzymes at the molecular level, and present equations to calculate pore filling from the more commonly reported immobilized mass. Methods to detect changes in enzyme structure upon immobilization and to study the microenvironment inside the pores are discussed in detail. Combining the knowledge generated from these methodologies should aid in rationally designing biocatalyst based on enzymes immobilized in mesoporous materials.     

Production of highly conductive textile viscose yarns by chemical vapor deposition technique: a route to continuous process

An oxidative chemical vapor deposition (OCVD) process was used to coat flexible textile fiber (viscose) with highly conductive polymer, poly (3,4‐ethylenedioxythiophene) (PEDOT) in presence of ferric (III) chloride (FeCl₃) oxidant. OCVD is a solvent free process used to get uniform, thin, and highly conductive polymer layer on different substrates. In this paper, PEDOT coated viscose fibers, prepared under specific conditions, exhibited high conductivity 14.2 S/cm. The effects of polymerization conditions, such as polymerization time, oxidant concentration, dipping time of viscose fiber in oxidant solution, and drying time of oxidant treated viscose fiber, were carefully investigated. Scanning electron microscopy (SEM) and FT‐IR analysis revealed that polymerization of PEDOT on surface of viscose fiber has been taken place and structural analysis showed strong interactions between PEDOT and viscose fiber. Thermogravimetric analysis (TGA) was employed to investigate the amount of PEDOT in PEDOT coated viscose fiber and interaction of PEDOT with viscose fiber. The effect of PEDOT coating on the mechanical properties of the viscose fiber was evaluated by tensile strength testing of the coated fibers. The obtained PEDOT coated viscose fiber having high conductivity, could be used in smart clothing for medical and military applications, heat generation, and solar cell demonstrators. Copyright © 2010 John Wiley & Sons, Ltd.