Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Spectrofluorimetric and isotachophoretic determination of maprotiline in human blood serum

Maprotiline determination in blood serum samples was investigated by the use of both capillary isotachophoresis and spectrofluorimetric techniques. The analyte had to be enriched before determination and extraction with n-heptane was used for this purpose. The preliminary separation enabled the determination of maprotiline in blood serum at therapeutic concentration levels.     

Behavior and characteristics of biogenic amines, ornithine and lysine derivatized with the o-phthalaldehyde-ethanethiol-fluorenylmethyl chloroformate reagent

The stability and characteristics of the ornithine (Orn), lysine (Lys), putrescine (Put), cadaverine (Cad), 1,7-diaminoheptane (Diah), spermidine (Spd) and spermine (Spm) derivatives obtained with the o-phthalaldehyde (OPA)-ethanethiol (ET)-fluorenylmethyl chloroformate (FMOC) reagent has been investigated. The stoichiometry of the introduced, two-step derivatization process has been followed by photodiode array (DAD) and fluorescence (FL) detections, simultaneously, while the composition of derivatives was confirmed by on-line HPLC-electrospray ionization (ESI) MS measurements. Depending on the composition of the OPA reagents, in addition to the secondary amino group-containing Spd and Spm, under common aqueous conditions also Orn and Lys do react with FMOC resulting in derivatives of various compositions. Applying the OPA-ET reagent of increasing methanol (Met) content (38-80%, v/v) the formation of the FMOC group containing Orn and Lys derivatives could be considerably decreased. Optimum elution condition (18 min, including equilibration) was developed for the simultaneous quantitation of Orn, Lys, Put, Cad, Diah, Spd and Spm, in the presence of the rest of protein amino acids. The practical utility of the method was demonstrated by the analysis of mouse tissues. Average reproducibility of quantitations, characterized with the relative standard deviation percentages of fluorescence intensities and UV responses, in order of listing, proved to be 2.1% and 2.1%, respectively.     

In vitro sampling and storage of proteins with an ultrafiltration collection device (UCD) and analysis with absorbance spectrometry and SELDI-TOF-MS

Frequent in vivo sampling of blood proteins is often stressful, making it difficult to obtain more than a few samples. As a result, only limited time-profiles can be made. We have developed an ultrafiltration collection device (UCD) for continuous sampling. The UCD consists of a hollow fiber, a coil and a flow creator. Hollow fiber membranes are often hydrophobic and this can result in adsorption of protein and/or peptides, leading to clogged membranes. Adsorption was tested with a hydrophobic and hydrophilic peptide and two biocompatible hollow fibers made from different materials. The hollow fiber made from poly(ethylene) coated with ethylenevinyl alcohol gave near 100% recovery for both peptides. This was in contrast to the poly(sulfone) hollow fiber when sampling the hydrophobic peptide. Filling the coil with various peptide concentrations gave good recovery and insignificant diffusion even after storage for 6 d at 37 degrees C. Continuous pulse-free sampling was tested by vacuum. An average flow rate of 423 +/- 50 nl min(-1) over a period of 4 d was created using S-Monovette. The flow rate gradually declined during this period by <5% every consecutive day. In addition, we also examined a complex sample-serum in the poly(ethylene) hollow fiber. Serum and ultrafiltrate were spotted onto a protein chip and analyzed by surface-enhanced laser desorption/ionization time-of-flight mass spectrometry (SELDI-TOF-MS). Six proteins out of 64 were found to be significantly different between serum and the ultrafiltrate (p < 0.05). The UCD has the potential to be used for in vivo real-time monitoring.     

An Anthracene-Based Metal-Organic Framework for Selective Photo-Reduction of Carbon Dioxide to Formic Acid Coupled with Water Oxidation

A Zr-based metal-organic framework has been synthesized and employed as a catalyst for photochemical carbon dioxide reduction coupled with water oxidation. The catalyst shows significant carbon dioxide reduction property with concomitant water oxidation. The catalyst has broad visible light as well as UV light absorption property, which is further confirmed from electronic absorption spectroscopy. Formic acid was the only reduced product from carbon dioxide with a turn-over frequency (TOF) of 0.69 h⁻¹ in addition to oxygen, which was produced with a TOF of 0.54 h⁻¹. No external photosensitizer is used and the ligand itself acts as the light harvester. The efficient and selective photochemical carbon dioxide reduction to formic acid with concomitant water oxidation using Zr-based MOF as catalyst is thus demonstrated here.     

Very sensitive differential pulse adsorptive stripping voltammetric determination of 4-nitrophenol at poly (diphenylamine)/multi-walled carbon nanotube-β-cyclodextrin-modified glassy carbon electrode

In this work, a glassy carbon electrode (GCE) modified with poly (diphenylamine)/multi-walled carbon nanotubes-β-cyclodextrin (PDPA/MWCNT-β-CD) film was constructed and used for the determination of 4-nitrophenol (4-NP). Diphenylamine was successfully electropolymerised onto MWCNT-β-CD-modified GCE by cyclic voltammetry in monomer solution and 5 mol L^?1 H₂SO₄. The surface morphology of PDPA/MWCNT-β-CD film was characterised using scanning electron microscopy and electrochemical impedance spectroscopy. After adsorption of 4-NP on PDPA/MWCNT-β-CD at 0.2 V for 150 s, it showed a well-defined reduction peak in phosphate buffer solution at pH = 7. The PDPA/MWCNT-β-CD film enhanced the reduction peak current due to the complex formation between β-CD and 4-NP, presence of conductive polymer film as electron transfer mediator and also ability of MWCNTs for strong adsorptive and catalytic effect. Peak current increased linearly with 4-NP concentration in the range of 0.1 to 13.9 µg L^?1. The detection limit was obtained as 0.02 µg L^?1, which is better than other reported detection limits for the determination of 4-NP. The results showed that modified electrode has good sensitivity and selectivity. This sensor was used for the determination of 4-NP in water samples.     

Theoretical investigation of the molecular structure,vibrational spectra,and molecular docking of tramadol using density functional theory

The optimized molecular structures, harmonic vibrational wavenumbers, and the corresponding vibrational assignments of (1S,2S)-tramadol and (1R,2R)-tramadol are computationally examined using the B3LYP density functional theory method together with the standard 6–311++G(d,p) and def2-TVZP basis sets. The optimized structures show that phenolic rings of both 1R,2R and 1S,2S tramadol adopt planar geometry, which are slightly distorted due to the substitution at the meta-position; and the six-membered cyclohexane adopts a slightly distorted chair conformation. The 1S,2S enantiomer is energetically more favorable than 1R,2R with the energy differences of 1.32 and 1.03 kcal/mol obtained at B3LYP/6–311++G(d,p) and B3LYP/Def2-TVZP levels, respectively. The analysis of the binding pocket in the silico molecular docking with the m-opioid receptor shows that it originated two clusters with the 1S,2S enantiomer and one cluster with the 1R,2R enantiomer of tramadol. The results point to a more stable complex of the m-opioid receptor with the 1R,2R enantiomer of tramadol.     

Admissible convergence in Cartan-Hadamard manifolds

In the context of a complete simply connected Riemannian manifold of pinched negative curvature, we show that several families of approach domains are equivalent for convergence to points of the boundary, and for the purposes of H^p-theory.