Phenomena Affecting the Equilibrium of Al(III) and Zn(II) Extraction with Winsor II Microemulsions

The extraction of Al(III) and Zn(II) from an aqueous solution with two water-in-oil microemulsions, one containing di(2-ethylhexyl)phosphoric acid (DEHPA), was investigated to aid the understanding of the role of the extractant and the metal specific characteristics in the mechanism of microemulsion extraction. The extraction of Al with the DEHPA microemulsion increased by a factor of about 10 with respect to that in the conventional DEHPA system, whereas the extraction of Zn was lower than that in the single DEHPA system. Extraction with the DEHPA-free microemulsion was very low, showing that metal ion solubilization was not important in the mechanism of microemulsion extraction. It is proposed that the effect of the mixed microemulsion on the metal distribution coefficient is the result of the balance between a decrease in the complexation reaction yield due to the interaction between butanol and DEHPA, and the adsorption of the metal complex at the macro- and microinterfaces. The former leads to a decrease in Zn(II) extraction and the latter to Al(III) extraction synergism. Copyright 2000 Academic Press.     

Effect of quantum confinement on the dielectric function of PbSe

Monolayers of lead selenide nanocrystals of a few nanometers in height have been made by electrodeposition on a Au(111) substrate. These layers show a thickness-dependent dielectric function, which was determined using spectroscopic ellipsometry. The experimental results are compared with electronic structure calculations of the imaginary part of the dielectric function of PbSe nanocrystals. We demonstrate that the size-dependent variation of the dielectric function is affected by quantum confinement at well-identifiable points in the Brillouin zone, different from the position of the band-gap transition.     

Liquid-crystalline phase behavior of a colloidal rod-plate mixture

The phase behavior of rod-plate mixtures was investigated using model systems containing unambiguously rod- and plate-shaped colloids. We find that the theoretically disputed biaxial nematic phase is unstable with respect to demixing into an isotropic and two uniaxial nematic phases. The phase behavior at very high densities is exceptionally rich and includes the coexistence of up to four different liquid crystalline phases, which stem from the coupling between the employed particle shapes and polydispersity.     

Infrared induced visible emission from porous silicon: the mechanism of anodic oxidation

The visible luminescence caused by anodic oxidation of p-type porous silicon has been studied. It is shown that similar luminescence can be observed in n-type material by illumination with near-infrared light. Addition of a suitable reducing agent to the electrolyte solution can both suppress the oxidation of the porous layer and quench its luminescence. These results confirm a previously suggested mechanism, in which the capture of a valence band hole in a surface bond of the porous semiconductor gives rise to a surface state intermediate capable of thermally injecting an electron into the conduction band.     

Determination of nifursol metabolites in poultry muscle and liver tissue. Development and validation of a confirmatory method

A method is described for the identification and quantitative determination of 3,5-dinitrosalicylic acid hydrazide (DSH), the marker residue of nifursol metabolites in poultry (turkey, broiler) muscle and liver tissue. The method is based on the acid-catalysed hydrolysis of tissue-bound metabolites to free DSH and in situ derivatisation with 2-nitrobenzaldehyde to the corresponding nitrophenyl derivative NPDSH. A structural analogue of DSH, 4-hydroxy-3,5-dinitrobenzoic acid hydrazide (HBH) was synthesised to serve as an internal standard. The analytes were isolated from the matrix by liquid-liquid extraction with ethyl acetate. Determination was performed by LC-MS/MS with negative electrospray ionisation. The [M - H](+) ions of NPDSH and NPHBH at m/z 374 were fragmented by collision induced dissociation (CID) producing transition ions at m/z 182, 183 and 226. The transition ions at m/z 182 and 226 were selected for monitoring of NPDSH while the transition ion at m/z 183 was selected for NPHBH. The method has been validated according to the EU criteria of Commission Decision 2002/657/EC at 0.5, 1.0 and 1.5 microg kg(-1) in muscle and liver tissue. A decision limit (CC(alpha)) was obtained of 0.04 and 0.025 microg kg(-1) in muscle and liver, respectively. Similarly a detection capability (CC(beta)) was obtained of 0.10 and 0.05 microg kg(-1) in muscle and liver, respectively. The introduction of HBH as an internal standard did not lead to a significant improvement of the quantitative performance of the method. In fact for liver better performance characteristics were obtained when the IS was not taken into account. Nevertheless, as a qualitative marker for recovery, HBH could still be very useful in the analysis of unknown samples.     

Shape and size effects in the optical properties of metallic nanorods

The influence of size and geometrical shape on the optical properties of randomly oriented metallic nanorods is investigated using the discrete dipole approximation (DDA). Our calculations provide a benchmark for an accurate characterisation of nanorod suspensions by frequently used optical spectroscopic techniques. Our DDA results confirm the longitudinal plasmon resonance to be primarily affected by the nanorod aspect ratio, and also verify that the quasi-static (dipole) approximation for ellipsoidal particles is only valid for very small sizes. For prolate ellipsoidal and cylindrical nanorods with an identical aspect ratio, the latter exhibit a longitudinal resonance at significantly longer wavelengths. The importance of phase retardation and multipole contributions for larger nanorod dimensions is discussed. Also, we investigate the influence on the optical spectra of electron surface scattering, which arises from the limited size of the nanorods in comparison to the electron mean free path.     

Copper Complexes with Diazoolefin Ligands and their Photochemical Conversion into Alkenylidene Complexes

Homometallic copper complexes with alkenylidene ligands are discussed as intermediates in catalysis but the isolation of such complexes has remained elusive. Herein, we report the structural characterization of copper complexes with bridging and terminal alkenylidene ligands. The compounds were obtained by irradiation of Cu^I complexes with N-heterocyclic diazoolefin ligands. The complex with a terminal alkenylidene ligand required isolation in a crystalline matrix, and its structural characterization was enabled by in crystallo photolysis at low temperature.     

Ellipsometric identification of collective optical properties of silver nanocrystal arrays

The optical properties of silver nanocrystal arrays are investigated using spectroscopic ellipsometry in combination with polarized reflection measurements. Analysis of the ellipsometry and reflectometry spectra in terms of the "thin island film" theory enables a transparent identification of the contribution of collective effects to the optical response. Negligible image charge effects imply that only dipole contributions have to be considered. The interactions between the hexagonally ordered silver nanocrystals give rise to an effective modification of the spherical response to oblate entities with different polarizabilities parallel and perpendicular to the substrate, expressed in terms of corresponding depolarization factors. The effect of nanocrystal ordering, nearest-neighbor distance, size distribution, surrounding ambient, and the optical properties of the single nanocrystals on the optical response are analyzed. The extent of plasmon resonance peak splitting as a function of surface coverage is discussed.     

Temperature Controlled Sequential Gelation in Composite Microgel Suspensions

Depending on the volume fraction and interparticle interactions, colloidal suspensions can exhibit a variety of physical states, ranging from fluids, crystals, and glasses to gels. For microgel particles made of thermoresponsive polymers, both parameters can be tuned using environmental parameters such as temperature and ionic strength, making them excellent systems to experimentally study state transitions in colloidal suspensions. Using a simple two‐step synthesis it is shown that the properties of composite microgels, with a fluorescent latex core and a responsive microgel shell, can be finely tuned. With this system the transitions between glass, liquid, and gel states for suspensions composed of a single species are explored. Finally, a suspension of two species of microgels is demonstrated, with different transition temperatures, gels in a sequential manner. Upon increasing temperature a distinct core–sheath structure is formed with a primary gel composed of the species with lowest transition temperature, which acts as a scaffold for the aggregation of the second species.