High speeds complementary integrated circuits fabricated with all‐printed polymeric semiconductors

Inkjet‐printed high speed polymeric complementary circuits are fabricated using an n‐type ([poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐dithiophene)} [P(NDI2OD‐T2), Polyera ActivInk N2200] and two p‐type polymers [poly(3‐hexylthiophene) (P3HT) and a dithiophene‐based polymer (Polyera ActivInk P2100)]. The top‐gate/bottom‐contact (TG/BC) organic field‐effect transistors (OFETs) exhibit well‐balanced and very‐high hole and electron mobilities (μ_FET) of 0.2–0.5 cm²/Vs, which were enabled by optimization of the inkjet‐printed active features, small contact resistance both of electron and hole injections, and effective control over gate dielectrics and its orthogonal solvent effect (selection of poly(methyl methacrylate) and 2‐ethoxyethanol). Our first demonstrated inkjet‐printed polymeric complementary devices have been integrated to high‐performance complementary inverters (gain >30) and ring oscillators (oscillation frequency ～50 kHz). We believe that the operating frequency of printable organic circuits can be further improved more than 10 MHz by fine‐tuning of the device architecture and optimization of the p‐ and n‐channel semiconductor processing. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Nanographite impurities in carbon nanotubes: their influence on the oxidation of insulin, nitric oxide, and extracellular thiols

There has been growing interest in the use of modified-carbon-nanotube electrodes in applications such as the electrochemical detection of biologically significant compounds, owing to their apparent "electrocatalytic" properties and ability to enhance oxidative signals. In spite of their salient properties, little work has been done to further examine the reasons for these reported characteristics. In this report, we present clear evidence that the presence of nanographite impurities within carbon nanotubes (CNTs) is responsible for providing the previously reported enhanced electrochemical response. We have demonstrated this effect on homocysteine, N-acetyl-L-cysteine, nitric oxide, and insulin, which are important biological agents in the body. Moreover, we also showed that the influence of nanographite impurities on the electrochemistry of carbon nanotubes is prevalent among a variety of CNTs, such as single-walled CNTs, double-walled CNTs, and few-walled CNTs. Our findings will have a profound influence upon the biomedical applications of CNTs.     

The Picard Theorem on S-metric spaces

Recently, the notion of an S-metric space is defined and extensively studied as a generalization of a metric space. In this paper, we define the notion of the S∞-space and prove its completeness. We obtain a new generalization of the classical "Picard Theorem".     

Effects of heating on the Raman spectra of YBa2Cu3O7−δ

We report effects of heating to the intensities of Raman modes in the spectra of single-crystals embedded in ceramic YBa₂Cu₃O_7– pellets, and compare the results with those from YBa₂Cu₃O_7– thin-films. Heating was done by either increasing the laser-beam power or resistively heating in a heating cell. From the measurements on a single-crystal in z(xx) polarization, we find that the relative intensity of the B_1g mode of the plane oxygens to that of the A_1g mode of apical oxygens decreases strongly as the samples are heated. For a crystal in near x(zz) polarization, the relative intensity of the two modes increases up to certain value. In thin-films, however, no such change was observed even when heated to higher temperatures than the crystals were. Therefore, we interpret that the change in the relative intensity of the two modes of single-crystals is not due to electronic or structural changes nor thermal decomposition in the heated samples. We propose that a single-crystal, when heated, is fractured into many micro-crystals and these micro-crystals thermally fluctuate in orientations. For thin-films, such fluctuation in orientations might be hindered because there are only a few layers of micro-crystals on top of the substrate. Scanning electron micrographs (SEM) of the heated part of the samples seem to provide the evidence of the micro-crystals.     

The Toxicity of Graphene Oxides: Dependence on the Oxidative Methods Used

Graphene, a class of two‐dimensional carbon nanomaterial, has attracted extensive interest in recent years, with a significant amount of research focusing on graphene oxides (GOs). They have been primed as potential candidates for biomedical applications such as cell labeling and drug delivery, thus the toxicity and behavior of graphene oxides in biological systems are fundamental issues that need urgent attention. The production of GO is generally achieved through a top‐down route, which includes the usage of concentrated H₂SO₄ along with: 1) concentrated nitric acid and KClO₃ oxidant (Hoffmann); 2) fuming nitric acid and KClO₃ oxidant (Staudenmaier); 3) concentrated phosphoric acid with KMnO₄ (Tour); or 4) sodium nitrate for in‐situ production of nitric acid in the presence of KMnO₄ (Hummers). It has been widely assumed that the properties of these four GOs produced by using the above different methods are roughly similar, so the methods have been used interchangeably. However, several studies have reported that the toxicity of graphene‐related nanomaterials in biological systems may be influenced by their physiochemical properties, such as surface functional groups and structural defects. In addition, considering how GOs are increasingly used in the field of biomedicine, we are interested to see how the oxygen content/functional groups of GOs can impact their toxicological profiles. Since in‐vitro testing is a common first step in assessing the health risks related with engineered nanomaterials, the cytotoxicity of the GOs prepared by the four different oxidative treatments was investigated by measuring the mitochondrial activity in adherent lung epithelial cells (A549) by using commercially available viability assays. The dose–response data was generated by using two assays, the methylthiazolyldiphenyl‐tetrazolium bromide (MTT) assay and the water‐soluble tetrazolium salt (WST‐8). From the viability data, it is evident that there is a strong dose‐dependent cytotoxic response resulting from the four GO nanomaterials tested after a 24 h exposure, and it is suggested that there is a correlation between the amounts of oxygen content/functional groups of GOs with their toxicological behavior towards the A549 cells.     

Cytotoxicity Profile of Highly Hydrogenated Graphene

Graphene and its graphene‐related counterparts have been considered the future of advanced nanomaterials owing to their exemplary properties. An increase in their potential applications in the biomedical field has led to serious concerns regarding their safety and impact on health. To understand the toxicity profile for a particular type of graphene utilized in a given application, it is important to recognize the differences between the graphene‐related components and correlate their cellular toxicity effects to the attributed physiochemical properties. In this study, the cytoxicity effects of highly hydrogenated graphene (HHG) and its graphene oxide (GO) counterpart on the basis of in vitro toxicological assessments are reported and the effects correlated with the physiochemical properties of the tested nanomaterials. Upon 24 h exposure to the nanomaterials, a dose‐dependent cellular cytotoxic effect was exhibited and the HHG was observed to be more cytotoxic than its GO control. Detailed characterization revealed an extensive C?H sp³ network on the carbon backbone of HHG with few oxygen‐containing groups, as opposed to the presence of large amounts of oxygen‐containing groups on the GO. It is therefore hypothesized that the preferential adsorption of micronutrients on the surface of the HHG nanomaterial by means of hydrophobic interactions resulted in a reduction in the bioavailability of nutrients required for cellular viability. The nanotoxicological profile of highly hydrogenated graphene is assessed for the first time in our study, thereby paving the way for further evaluation of the toxicity risks involved with the utilization of various graphene‐related nanomaterials in the real world.     

Sonolysis of chlorinated compounds in aqueous solution

To examine the reaction rates of sonochemical degradation of aqueous phase carbon tetrachloride, trichloroethylene and 1,2,3-trichloropropane at various temperatures, power intensities, and saturating gases, the batch tests were carried out. The degradations of chlorinated hydrocarbons were analyzed as pseudo first order reactions and their reaction rate constants were in the range of 10(-1)-10(-3)/min. The reaction was fast at the low temperature with higher power intensity. Also, the reaction went fast with the saturating gas with high specific heat ratio, high solubility and low thermal conductivity. The main mechanism of destruction of chemicals was believed the thermal combustion in the bubble.     

Graphene materials preparation methods have dramatic influence upon their capacitance

Graphene related materials are widely expected to play a major role as materials for the construction of supercapacitors. We demonstrate here that graphene oxides prepared by various well-established methods exhibit dramatically different capacitances. We exfoliated graphite oxide sonographically to graphene oxide (GO) and we reduced GO by chemical or electrochemical means to chemically reduced graphene oxide (CRGO) and electrochemically reduced graphene oxide (ERGO); in addition, graphite oxide was thermally exfoliated leading to thermally reduced graphene oxide (TRGO). We found clear dependence of weight specific capacitance upon amount of oxygen containing groups presented on the surface of these graphenes. GO exhibits the lowest and TRGO the highest values of weight specific capacitance.