Effect of various irradiation doses on some nutrients of Pakistani date

Summary Date samples were irradiated with different doses using a gamma-irradiator. Levels of moisture, protein, fibre and fats were determined on monthly basis for 5 months. Generally, the moisture contents of control date samples packed in white polythene decreased from 14.1±1.1 to 9.7±0.8% over a 5-month period while the irradiated samples were in the range of 10.4-11.2%, however, no proper pattern of change was observed. After 5-month storage, the protein level of irradiated samples was reduced to 1.00-1.30%, while the percent fibre levels were found to be in the range of 2.40-2.48. Similarly, the fat level decreases from 1.06±0.12 to 0.68±0.06 for control date sample while after 5-month the decrease in fat content was 0.45±0.04%, 0.44±0.04%, 0.44±0.05%, 0.42±0.05% and 0.40±0.04% for samples irradiated with 20, 50, 100, 200 and 300 krads, respectively.     

Neutron induced radiography in the determination of boron in drinking water

Neutron induced radiography has been applied to the determination of boron concentrations in drinking water, collected from natural springs of Reshian and Muzaffarabad areas of Azad Kashmir, Pakistan, using CR-39 etched track detectors. The technique is based upon the simultaneous irradiation with thermal neutrons of a sample of unknown concentration and a standard of known boron concentration, fixed on a track detector. The subsequent counting of alpha and ⁷Li tracks in the detector resulting from the ¹⁰B(n,)⁷Li nuclear reaction is done after chemical etching. Boron concentration in the sample is determined by comparing ⁷Li and alpha-particle track density with that of a standard of known boron concentration. Boron concentrations in drinking water samples from Muzaffarabad and Reshian area of Azad Kashmir have been found to vary from (0.054±0.001) mg/l to (0.250±0.004) mg/l with an average of (0.16±0.002) mg/l. The observed concentration of boron in drinking water has been found to be less than the provisional Maximum Acceptable Concentration level (0.4 mg//l) of WHO. The drinking water from the reported area has been found to be within safe limits as far as boron related health hazards are concerned.This revised version was published online in November 2005 with corrections to the Cover Date.     

Effect of post-synthetic processing conditions on structural variations and applications of bacterial cellulose

Physicochemical properties of materials can be amended by altering their physical structure through different processing conditions. The present study was conducted to investigate the post-synthesis structural variations and physico-mechanical properties of bacterial cellulose (BC) sheets prepared using different drying methods. Wet BC sheets of the same origin were freeze dried (BC-FD), dried at room temperature (25 °C) (BC-DRT), and dried at elevated temperature (50 °C) (BC-DHT). FE-SEM micrographs revealed that BC-DRT and BC-DHT had a more tightly packed and compact structure than the loosely held fibrils of BC-FD. XRD analysis revealed the relative crystallinity of the BC sample to be 64.60, 59.16, and 47.20 % for BC-DHT, BC-DRT and BC-FD, respectively. The water holding capacity (WHC) of the BC-FD was higher than that of the other two samples. Four consecutive drying and rewetting cycles demonstrated that the WHC of all samples decreased with each cycle. The WHC of BC-DRT and BC-DHT was reduced to almost 0 after the first drying cycle, but the BC-FD samples were able to regain some of their WHC. The tensile strength and elongation modulus were in the order of BC-DHT > BC-DRT > BC-FD. Overall, the results of this study revealed that the post-synthetic processing conditions had a strong effect on the structure and physico-mechanical properties of BC.     

Unroofing history of the Sillai Patti granite gneiss, Pakistan: constraints from zircon fission-track dating

A group of alkaline igneous rocks is exposed in the north of the Peshawar Plain, extending from Tarbela in the east up to Loe–Shilman near the Pakistan–Afghanistan border in the west. The alkaline rocks consist mainly of granites, syenites, gabbros, ijolites and carbonatites. Granitic gneisses of Paleozoic age are exposed at the Malakand and further westward at Sillai Patti. However, the fission-track dating studies on zircon, based on the present work, indicate that the age of the Sillai Patti granite gneiss is less than the absolute age of granite gneisses. Therefore, the zircon fission-track age of 24.28±2.97 Ma of the Sillai Patti granite gneiss, represents a time of post-metamorphic denudation history of the area, when these rocks passed through the 210°C isotherm, corresponding to a depth of about 6.7 km inside the earth's crust from their present position if a paleogeothermal gradient of 30°C/km is assumed to have prevailed. Our average fission-track zircon age of 24.28±2.97 Ma is very similar to the average fission-track zircon age of 25.4±0.7 Ma of Mansehra granites. Average cooling rates of the Mansehra and Sillai Patti granite gneisses have been computed to be (8.00±0.22)°C/Ma and (8.00±0.98)°C/Ma, while the average denudation rates of the Mansehra and Sillai Patti granite gneisses have been computed to be (0.262±0.007) and (0.274±0.034) mm/yr, respectively, on the basis of zircon fission-track ages for the period between 25 Ma and the present time. This indicates that the two complexes have experienced similar average cooling/uplift-induced denudation histories during the last 25 Ma or so.     

Synthesis and characterization of β-Ga2O3 nanostructures grown on GaAs substrates

β-Ga₂O₃ nanostructures including nanowires, nanoribbons and nanosheets were synthesized via thermal annealing of gold coated GaAs substrates in N₂ ambient. GaAs substrates with different dopants were taken as the starting material to study the effect of doping on the growth and photoluminescence properties of β-Ga₂O₃ nanostructures. The nanostructures were investigated by Grazing Incident X-ray Diffraction, Scanning Electron Microscopy, Transmission Electron Microscopy, Energy Dispersive X-ray Spectroscopy, room temperature photoluminescence and optical absorbance. The selected area electron diffraction and High resolution-TEM observations suggest that both nanowires and nanobelts are single crystalline. Different growth directions were observed for nanowires and nanoribbons, indicating the different growth patterns of these nanostructures. The PL spectra of β-Ga₂O₃ nanostructures exhibit a strong UV-blue emission band centered at 410 nm, 415 nm and 450 nm for differently doped GaAs substrates respectively. A weak red luminescence peak at 710 nm was also observed in all the samples. The optical absorbance spectrum showed intense absorption features in the UV spectral region. The growth and luminescence mechanism in β-Ga₂O₃ nanostructures are also discussed.     

Effect of gadolinium substitution on the linear thermal expansion of barium sodium niobate

Ba₂NaNb₅O₁₅ (BSN) exhibits a large thermal contraction in its c-axis between 350° and 750°C. This behaviour contributes to a serious cracking problem during its crystal growth. The substitutions of Gd for Ba and/or Na in BSN can be made with either anion or cation compensation. The former, namely, type A, compositions were found to eliminate the thermal contraction behaviors, and had small variations in their linear thermal expansion coefficients, α, between 50° and 650°C. With good ferroelectric and dielectric properties, they showed potentials to replace the BSN crystal in electro-optic devices.     

Herbicidal activity of pure compound isolated from rhizosphere inhabiting Aspergillus flavus

In the quest for bioactive natural products of fungal origin, Aspergillus flavus was isolated from rhizosphere of Mentha piperita using Potato Dextrose Agar (PDA) and Czapec Yeast Broth (CYB) nutrient media for metabolites production. In total, three different metabolites were purified using HPLC/LCMS and the structures were established using 500 Varian NMR experiments. Further the isolated metabolites in different concentrations (10, 100, 1000 μg/mL) were tested for herbicidal activity using Completely Randomized design (CRD) against the seeds of Silybum marianum and Avena fatua which are major threats to wheat crop in Pakistan. Among the isolated metabolites, one compound was found active against the test weed species whose activity is reported in the present work. The chemical name of the compound is 2-(1, 4-dihydroxybutan-2-yl)-1, 3-dihydroxy-6, 8-dimethoxyanthracene-9, 10(4aH, 9aH)-dione with mass of 388. Results showed that all seeds germinated in control treatment; however, with the metabolite treated, the growth was retarded to different levels in all parts of the weeds. At a dose of 1000 μg/mL of the pure compound, 100% seeds of S. marianum and 60% seeds of A. fatua were inhibited. Interestingly, the pure compound exhibited less inhibition of 10% towards the seeds of common wheat (Triticum aestivum).