Effect of temperature on the luminescence processes of SrAl2O4:Eu

The UV excited and persistent luminescence properties as well as thermoluminescence (TL) of Eu²⁺ doped strontium aluminates, SrAl₂O₄:Eu²⁺ were studied at different temperatures. Two luminescence bands peaking at 445 and 520 nm were observed at 20 K but only the latter at 295 K. Both Sr-sites in the lattice are thus occupied by Eu²⁺ but at room temperature efficient energy transfer occurs between the two sites. The UV excited and persistent luminescence spectra were similar at 295 K but the excitation spectra were different. Thus the luminescent centre is the same in both phenomena but excitation processes are different. Two TL peaks were observed between 50 and 250 °C in the glow curve. Multiple traps were, however, observed by preheating and initial rise methods. With longer delay times only the high temperature TL peak was observed. The persistent luminescence is mainly due to slow fading of the low temperature TL peak but the step-wise feeding process from high temperature traps is also probable.     

The Effect of Boundary Conditions on Gas-phase Synthesised Silver Nanoparticles

We have prepared spherical non-agglomerated silver nanoparticles by an evaporation–condensation–dilution/cooling technique. Silver was evaporated from a crucible in a tubular flow reactor. A porous tube diluter was used to quench the carrier gas at the outlet of the reactor to enhance the formation of small particles and to suppress agglomeration and other particle growth mechanisms. The number size distribution of the prepared particles was measured with a differential mobility analyser–condensation nucleus counter combination and the size and the shape of the particles were analysed with transmission electron microscope. The system was modelled using a sectional aerosol dynamics computer code to estimate the importance of different aerosol processes. In all conditions the particles obtained were non-agglomerated and spherical. The mean particle diameter varied from 4 to 10-nm depending on boundary conditions. From the modelling studies it can be concluded that the nucleation rate is the most important parameter controlling the final particle size.     

Effect of method of solution on observed molecular weight distribution of barley starch and starch derivatives in size exclusion chromatography

Summary Samples of native barley starch and six starch derivatives were suspended (0.1% sample concentration) in four different solvents: the eluent (pH 11 buffer), dimethylsulfoxide, 0.1 M NaOH or 0.5 M NaOH and kept in a boilling water bath for 5 to 60 minutes or shaken for 60 minutes. The average molecular weight values , and the polydispersity value were determined with a TSK PW-type column using narrow standard calibration. Only a small part of the samples dissolved in the eluent. The dissolution of sample in dimethylsulfoxide was dependent on sample type. Of the NaOH solutions, 0.5 M NaOH was the only one that dissolved all the samples. Therefore, 0.5 M NaOH appears to be the solvent of choice for starch molecules.     

Solid-phase extraction and cleanup of organophosphorus pesticide residues in bovine muscle with gas chromatographic detection

The purpose of this investigation is to develop a rapid and simple method for the assessment of organophosphorus pesticides in bovine muscle by using solid-phase extraction (SPE). After extraction with ethyl acetate (EtOAc) the homogenate is centrifuged and filtered through sodium sulfate. The fat is precipitated in methanol by cooling and the extract is diluted with water and passed through a SPE column (Isolute ENV+). After elution with EtOAc, evaporation, and redissolution, the sample is injected into a gas chromatographic (GC) capillary column DB-1701 and detected by a flame photometric detector. Recoveries from bovine muscle fortified with 12 pesticides between 4 and 65 microg/kg include three levels ranging between 59% and 109% for ten of them. The two most polar pesticides (metamidophos and acephate) are not successful. The relative standard deviations are between 1% and 10% for the ten pesticides. A simplex method is used to optimize the GC conditions.     

Degradative analysis of aquatic fulvic acid: CuO oxidation versus pyrolysis after tetramethylammonium hydroxide treatments in air and helium atmospheres

The structural composition of Nordic aquatic reference fulvic acid was investigated using chemical and thermal degradation methods: alkaline CuO oxidation and analytical pyrolysis after tetramethylammonium hydroxide (TMAH) pretreatment. Off-line procedures of the TMAH treatments were carried out under both air and helium atmospheres, with the aim of clarifying the effect of oxygen. Irrespective of the fact that the chemical and thermal degradation methods gave qualitatively quite similar basic products (mainly phenols and phenolic acids together with aromatic and aliphatic carboxylic acids), they also revealed their unique selectivity and efficiency for releasing different kinds of structural constituents. The results verify the formation of additional carboxyl functionality in the CuO oxidation. However, some similar oxidative reactions also appeared to take place during the pretreatment procedures of strongly basic TMAH, especially under an air atmosphere. The use of inert and protective atmosphere during the TMAH pretreatment is therefore recommended for producing more relevant structural information about the complex composition of humic substances.     

Determination of biogenic amines in wine by multidimensional liquid chromatography with online derivatisation

An online multidimensional liquid chromatographic system was developed for online clean-up, derivatisation and separation of biogenic amines in wines. The system consists of a cation-exchange precolumn, a derivatisation coil and an analytical column, and a column-switching valve. The entire system can be easily automated. The method proved to be quantitative and sensitive. Limits of detection were below 0.05 mg l(-1) for all amines and linearity was preserved over the tested range (0.05-15 mg l(-1)). The method was applied to the analysis of red wines of different origin.     

The preparation of a cabbage reference material for environmental monitoring and food analysis

 Cabbage is frequently used in environmental monitoring and food control, and, hence, cabbage reference materials (RMs) are required for ensuring quality assurance. A cabbage RM was prepared in view of certification of specific elements from the "black list" of high toxicological interest and nutritive importance. All tasks of the RM production (production of the plant material, cutting and freeze-drying, determination of the residual water content, preparation of the RM, homogeneity testing, stability testing, certification measurements) are described in detail. Received: 12 November 1999 / Accepted: 29 January 2000     

Micellar electrokinetic capillary chromatography method for direct determination of glucuronides of entacapone and its (Z)-isomer in human urine

This paper describes the validation of a micellar electrokinetic capillary chromatography method for the direct determination of the 3-O-glucuronides of entacapone and its (Z)-isomer, the main urinary metabolites of entacapone in humans. Entacapone is a novel drug which, as a potent inhibitor of catechol-O-methyltransferase (COMT), is used as an adjunct in the standard therapy of Parkinson's disease. The 3-O-glucuronide of another COMT inhibitor, nitecapone, was used as internal standard (I.S.). The validation experiments were performed by using spiked urine samples that were extracted with Sep-Pak C18 cartridges before analysis. Determinations were carried out in a buffer of pH 7.0 containing 25 mM of phosphate, 50 mM of borate and 20 mM of sodium dodecyl sulfate, and by applying 15 kV over a 67 cm (60 cm to the detector) x 75 microns fused-silica capillary. UV detection was at 335 nm. The validity of the method was assessed by investigating the identity of the analytes, selectivity, limit of quantitation, linearity, within-day precision, extraction recovery, between-day precision and accuracy, electroosmotic flow stability and analyte stability. The method proved to be reproducible, sufficiently selective and accurate. Extraction recoveries of the analytes were > 94%. The limit of quantitation (LOQ) was 2 micrograms/ml and the assay was linear in the range 2-150 micrograms/ml with correlation coefficients better than 0.999 for both glucuronides. The repeatability of the method, expressed as the ratio of corrected peak area of the analytes to that of I.S., gave RSD values of < 5% even at the LOQ. Between-day precision (RSD) was < 7.5% for both glucuronides at 7.5 micrograms/ml. Determination of the glucuronide concentrations in urine samples of 34 patients treated with entacapone either orally (200 mg) or intravenously (25 mg) showed the method to be suitable for monitoring the concentrations of the glucuronide of entacapone after both oral and intravenous administration and those of the glucuronide of its (Z)-isomer after oral administration. The limited long term stability of the system requires, however, frequent recalibration in applications involving long sample series.     

Effects of various washing procedures on the chromium content of human scalp hair

The effects of four wash procedures on the concentration of chromium in a pooled sample of human scalp hair are compared. The wash solutions examined are Triton X-100, sodium lauryl sulphate, acetone, and a mixture (1 + 1) of hexane and ethanol. The plateaux reached for hair chromium concentration are functions of the number of washings, and are characteristic for each wash solution. The wash procedure recommended involves two 20-min washes with aqueous 1% sodium lauryl sulphate solution after a hexane rinse.     

A comparative study of solvent extraction of total petroleum hydrocarbons in soil

Three non-specific methods for the extraction of total petroleum hydrocarbons (TPH) from soil into organic solvent were compared. The techniques used for sample preparation were Soxhlet extraction, closed-vessel microwave-assisted extraction, and CEN shake extraction. The total concentrations of extracted compounds in the boiling point range of C10–C40 were determined by gas chromatography with flame ionization detection. The best recovery (99%) and repeatability (±3%) from standard oil mixtures were obtained with microwave-assisted extraction. However, the different extraction methods exhibited different behaviour when spiked soil samples were extracted. The best repeatability was obtained with CEN shake extraction (±6%) but the repeatability values for Soxhlet and microwave-assisted methods were quite high (>20%). However, the larger uncertainties of the latter extraction methods does not necessarily limit the applicability of these methods to the determination of petroleum hydrocarbons in soil, as in the assessment of soil contamination the expanded uncertainty of the result is usually not limited by analytical uncertainty, but rather by the uncertainty of the primary sampling stage. However, distinctive variation found in the chromatographic profiles illustrates that discretion should be obeyed when chromatograms obtained after application of different extraction methods on petroleum contaminated samples are to be used in the fingerprinting or age dating studies. Otherwise, misleading conclusions concerning the age of spillage could be drawn.