Comparisons of pharynx, source, formant, and pressure characteristics in operatic and musical theatre singing

Belting, a vocal technique typically cultivated in musical theatre singing, differs timbrally from operatic singing in many interesting respects. The underlying phonatory differences have not been previously investigated in detail. Yet, belting is frequently associated with disturbances of voice function. Articulatory and phonatory characteristics are investigated in a female subject who is a professional singer (co-author JL) trained in both the operatic and belting styles and in an intermediate vocal technique (“mixed”). This article presents data obtained from this subject by video-fiberoptic observation of the pharynx, inverse filtering of airflow, and measurement of subglottal pressure. The results reveal that belting was characterized by very high subglottal pressures and sound levels, and apparently also by a comparatively high degree of glottal adduction. Comparisons with other investigations of related aspects of belting and operatic singing support the assumption that the data obtained from our subject are representative for these vocal techniques.     

X-ray structure and variable temperature NMR spectra of [meso-triarylcorrolato]copper(III)

The diamagnetic square planar d(8) complexes [meso-arylcorrolato]copper(III) become paramagnetic upon warming, indicative of the equilibrium between the [corrolato]copper(III) and the [corrolato](+)* copper(II) forms of the complex. [meso-Triphenylcorrolato]copper(III) was structurally characterized and found to be saddled.     

Reactions of Molecules with Two Equivalent Functional Groups. 5. Anomalous Reactivity of 1,10-Cyclooctadecanedione. Crystal and Molecular Structures of cis,cis-1,10-Diphenyl-1,10-cyclooctadiene and the Stereoisomers of 1,10-Diphenyl-1,10-cyclooctadecanediol(1)

The reaction of the title diketone (3) with phenyl Grignard produces (with rate constant k(1)) the conjugate base (6-M) of 10-hydroxy-10-phenylcyclooctadecanone (6), which is subsequently converted (with rate constant k(2)) to the conjugate base of the title diol, as a mixture of the cis (7, 55%) and trans (8, 45%) isomers. The ratio k(2)/k(1), 2.2 +/- 0.4, indicates that the carbonyl group in 6-M is 4.4 times as reactive as each carbonyl in 3. Competition experiments further demonstrate that the relative rates (per carbonyl) for addition of phenylmagnesium bromide to 3, 10-methylenecyclooctadecanone (11), and cyclopentadecanone (12) are 1.0:0.60:1.92. Possible reasons for this order of reactivity are discussed. Diols 7 and 8 undergo facile double dehydration to form the title diene 13, which is predicted by molecular mechanics calculations to be the most stable of the four possible symmetrical diene isomers. The structures of 7, 8, and 13 were secured by single-crystal X-ray studies.     

Anion-controlled nuclearity in nickel complexes with potentially dinucleating, poly(oxime) amine ligands

Two new ligands consisting of bis(oxime) amine units tethered by a bridge have been synthesized. Their nickel chloride and nickel nitrate complexes have also been synthesized and characterized by X-ray crystallography, FTIR, mass spectrometry, and elemental analysis. One of these ligands, L1 (N,N,N',N'-tetra(1-propan-2-onyl oxime)-diamino-m-xylene), is always dinucleating, while the other ligand, L2 (N,N,N',N'-tetra(1-propan-2-onyl-oxime)-1,3-diaminopropane), shows an unusual anion dependence on the nuclearity. When nickel chloride is used, the ligand acts in a dinucleating manner and coordinates two nickels; however, when nickel nitrate is used, the ligand acts in a monodentate fashion and coordinates only one nickel. Once the mononuclear complex is formed, it is not possible to add a second nickel if Ni(NO(3))(2) is used as the nickel source; it is possible, however, to add a second nickel if NiCl(2) is used as the nickel source. The dinuclear complex can be converted to the mononuclear one by either using silver nitrate to exchange the chloride anions for nitrates or by dissolving the complex in water. Ni(2)(L1)Cl(4)(DMF)(2).DMF: orthorhombic, P2(1)2(1)2(1), a = 12.2524(11) A, b = 16.6145(15) A, c = 20.1234(19) A, V = 4096.5(6) A(3), Z = 4. [Ni(2)(L2)Cl(4)(DMF)](2).2DMF: triclinic, P-1, a = 12.5347(5) A, b = 12.5403(5) A, c = 14.3504(6) A, alpha = 67.348(1) degrees , beta = 69.705(1) degrees , gamma = 81.549(1) degrees , V = 1952.25(14) A(3), Z = 1. Ni(L2).(NO(3))(2): monoclinic, P2(1)/n, a = 9.6738(3) A, b = 30.2229(9) A, c = 15.8238(5) A, beta = 97.995(1) degrees , V = 4581.4(2) A(3), Z = 8.     

Illustration of a simple and versatile scheme for reversing enantiomeric elution order and facilitating enantiomeric impurity determination in capillary electrophoresis

Determination of enantiomeric purity is most often done under overload conditions, which leads to deformed peaks. In general, the best resolutions are obtained when the small peak appears before the large peak in the electropherogram. To be able to determine the R(+)-impurity in the S(-)-form as well as the S(-)-impurity in the R(+)-form the elution orders have to be reversed. The present paper describes reversal of enantiomeric elution order for the basic analyte propranolol and the acidic analyte ibuprofen. For propranolol, a charged heptakis-(6-sulfo)-beta-cyclodextrin (CD) is used in the background electrolyte. For ibuprofen, a mix of the charged heptakis-(6-sulfo)-beta-CD and the uncharged heptakis-(2,3,6-tri-O-methyl)-beta-CD is used in the background electrolyte. The use of a coated capillary and reversal of the polarity shift the elution order, buffer composition is unchanged in both cases. The enantiomers of propranolol and ibuprofen are well separated on both the coated and uncoated capillaries. Detection limits of enantiomer impurities are investigated using spiked samples of both propranolol and ibuprofen.     

Influence of calcium on the self-assembly of partially hydrolyzed alpha-lactalbumin

Self-assembly of alpha-lactalbumin after partial hydrolysis by a protease from Bacillus licheniformis can result in nanotubular structures, which show many similarities to microtubules. Calcium plays a crucial role in this process. The objective of this investigation was to study the role of calcium in more detail. The kinetics of the hydrolysis step and the self-assembly step were monitored by respectively liquid chromatography-mass spectrometry and dynamic light scattering. The microstructure of the gels finally formed was investigated by transmission electron microscopy. This investigation demonstrates that calcium accelerated the kinetics of the self-assembly, but it had no effect on the hydrolysis kinetics. As a result of the accelerated self-assembly kinetics at a high calcium concentration, the time of gelation decreased as well. A minimum concentration of calcium needed to obtain the tubular alpha-lactalbumin structures was determined. Below R = 1.5 (mole calcium/mole alpha-lactalbumin), turbid gels with randomlike structure were obtained. Between R = 1.5 and R = 6, translucent gels with a fine stranded network of tubules were formed, while higher calcium concentrations had a negative effect on the tubule formation, resulting in amorphous structures. The optimum calcium concentration for alpha-lactalbumin nanotube formation seemed to be around R = 3.     

Dibenzotetraaza crown ethers: a new family of crown ethers based on o-phenylenediamine

Dibenzotetraaza (DBTA) crown ethers possess two o-phenylenediamine moieties. They are homologues of dibenzo crown ether phase-transfer catalysts and were prepared from the condensation of benzimidazoles with oligo(ethyleneglycol) dichlorides and oligo(ethyleneglycol) ditosylates. Compounds with ring sizes ranging from 18-crown-6 to 42-crown-14 were prepared. In addition, various altered benzimidizoles were used to produce DBTA crown ethers with modified substituents and ether bridges, as well as benzimidazolidine crown ethers. The synthetic approach presented here proved to be a convenient route to a new family of crown ethers with overall yields of up to 48% based on the benzimidazole. Yields for the ring-closing step were generally high, ranging from 51% to 94%, without the need for high-dilution conditions. Reaction of the DBTA crown ethers with alkyl and benzyl halides was found to be a facile way to obtain the corresponding tetra(N-organyl) compounds. Picrate extraction studies were carried out to determine phase-transfer catalytic capabilities. Extraction efficiencies for alkali-metal ions were lower than those for dibenzo-18-crown-6. Efficiencies were higher for other metal ions, with some selectivity for Pb(2+). Tetra(N-methyl) DBTA-18-crown-6 generally exhibited higher extraction efficiencies than its N-H analogue, but the selectivity was lower.     

On the use of scans at a constant ratio of B/E for studying decompositions of peptide metal(II)-ion complexes formed by electrospray ionization

The use of sector mass spectrometers to study metastable ion decompositions of peptide metal-ion complexes formed by electrospray ionization is discussed. Products that are formed by charge-separation reactions are characterized by large kinetic energy release distributions. This causes scans at a constant B/E to give incorrect product ion abundances and possibly incorrect mass assignments. Two instrumental methods exist that can be used either to detect the ions or to estimate relative ion abundances: a floated collision cell or mass-analyzed ion kinetic energy spectrometry (MIKES) scans. The floated collision cell, by virtue of an altered B/E scan law, however, discriminates against important metastable ion reactions that occur outside the cell. MIKES scans provide a clearer estimate of product ions that arise by metastable ion charge-separation reactions. Problems with pseudotandem (first field-free region) experiments are also discussed.     

Immunochemical determination of dioxins in sediment and serum samples

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are considered highly toxic contaminants and the environmental and biological monitoring of these compounds is of great concern. Immunoassays may be used as screening methods to satisfy the growing demand for rapid and low cost analysis. In this work, we describe the application of an immunoassay that uses 2,3,7-trichloro-8-methyldibenzo-p-dioxin (TMDD) as a surrogate standard for 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) to sediment and human serum samples. Sample extraction and preparation methods were developed with the aim to establish the simplest, cost-effective and efficient removal of the matrix interferences in the enzyme-linked immunosorbent assay (ELISA). The overall method for sediments is based on a hexane extraction; clean up by a multilayered silica gel column and an activated carbon column; an organic solvent exchange with DMSO–Triton X-100 and ELISA measurement. The gas chromatography–high resolution mass spectrometry (GC–HRMS) validation studies (n = 13) revealed that the method is suitable for the toxic equivalents (TEQ) screening of dioxin in sediments with a method detection limit of about 100 pg g⁻¹ dry sediment with a precision of 13–33% R.S.D. The analysis of a large number of samples originating from different sources would be required to establish more precisely the screening level, as well as the number of false positives and negatives of dioxin TEQ by the immunoassay for sediments. The immunoassay method for sediment analysis offers improvement in speed, sample throughput, and cost in comparison to GC–HRMS. Dioxins were determined in serum samples after a simple liquid–liquid extraction and solvent exchange into DMSO–Triton X-100 without further dilution. The current method (approximate method LOQ of 200 pg ml⁻¹ serum) is not sufficiently sensitive for the determination of dioxins in serum to measure acceptable exposure limit.     

(18)O]-oxygen incorporation reveals novel pathways in spiroacetal biosynthesis by Bactrocera cacuminata and B. cucumis

The origins of the oxygen atoms in 1,7-dioxaspiro[5.5]undecane (1) and hydroxyspiroacetal (2) from Bactrocera cacuminata, and in 2,8-dimethyl-1,7-dioxaspiro[5.5]undecane (3) and hydroxyspiroacetal (4) from B. cucumis, have been investigated by incorporation studies from both [(18)O(2)]-dioxygen and [(18)O]-water. Combined GC-MS examination and high-field NMR analysis have demonstrated that all oxygen atoms in 1 and 2 from B. cacuminata are dioxygen derived, but in contrast, the spiroacetals 3 and 4 from B. cucumis incorporate one ring oxygen from water and one ring oxygen (and the hydroxyl oxygen in 4) from [(18)O(2)]-dioxygen. These results reveal not only the generality of monoxygenase mediation of spiroacetal formation in Bactrocera sp., but also an unexpected complexity in their biosynthesis. A general paradigm accommodating these and other observations is presented.