Study of the gas-phase parameters affecting the silicon-oxide film deposition induced by an ArF laser

A study of the gas-phase parameters involved in ArF laser induced chemical vapour deposition of silicon-oxide thin films is presented. A complete set of experiments has been performed showing the influence of the concentration of the precursor gases, N₂O and SiH₄, and their influence on total and partial pressures on film growth and properties. In this paper we demonstrate the ability of this LCVD method to deposit silicon oxide films of different compositions and densities by appropriate control of gas composition and total pressure. Moreover, a material specific calibration plot comprising data obtained using different preparation techniques is presented, allowing determination of the stoichiometry of SiO _x films by using FTIR spectroscopy independently of the deposition method. For the range of processing conditions examined, the experimental results suggest that chemical processes governing deposition take place mainly in the gas phase.     

Miscibility of polyester/nitrocellulose blends: A DSC and FTIR study

The miscibility of polyester/nitrocellulose blends was investigated by differential scanning calorimetry and Fourier-transform infrared (FTIR) spectroscopy. Two nitrocelluloses (NC) derived from wood and having different nitrogen contents (12.62 and 13.42%) were used. On the basis of the glass transition temperature criterion, poly(?-caprolactone) (PCL), poly(valerolactone), poly(ethylene adipate), and poly(butylene adipate) are miscible with nitrocellulose, whereas poly(α-methyl α-propyl β-propiolactone) and poly(α-methyl β-proiolactone) are immiscible. The T_g versus composition curves of PCL/NC blends do not follow a monotone function but exhibit a singular point at a critical PCL volume fraction of 0.51 for NC-1342 and 0.45 for NC-1262 in agreement with Kovacs' theory. A shift of 17 cm^-1 of the carbonyl stretching band was observed with PCL/NC blends and is taken as evidence for hydrogen bonding interaction between the PCL carbonyl group and NC hydroxyl group. The frequency difference between the free hydroxyl absorbance and the absorbances of the hydrogen-bonded species was found to be 85 cm^-1 in pure NC and 125 cm^-1 in PCL/NC blends; it indicates that the average strength of this interaction is stronger than the corresponding self-associated hydrogen bonding in pure NC. The presence of a dipole-dipole interaction between the nitrate-ester groups of NC and the carbonyl groups of the polyesters is reported. The relative strength of the hydrogen bonding and dipole-dipole interactions is discussed and correlated with polymer miscibility.     

Photothermal microanalysis of thermal discontinuities in metallic samples

Modeling the behavior of a protective coating during a thermal shock not only requires the knowledge of its own thermophysical characteristics, but also those of the coating–substrate discontinuity. According to its nature, this discontinuity can be modeled as a zero-thickness interface (thermal contact resistance) or a finite thickness layer (thermal third body). This paper presents an experimental device and two associated thermal transfer models developed in view of the microscale characterization of such discontinuities.     

How to prove that a preconditioner cannot be superlinear

In the general case of multilevel Toeplitz matrices, we recently proved that any multilevel circulant preconditioner is not superlinear (a cluster it may provide cannot be proper). The proof was based on the concept of quasi-equimodular matrices, although this concept does not apply, for example, to the sine-transform matrices. In this paper, with a new concept of partially equimodular matrices, we cover all trigonometric matrix algebras widely used in the literature. We propose a technique for proving the non-superlinearity of certain frequently used preconditioners for some representative sample multilevel matrices. At the same time, we show that these preconditioners are, in a certain sense, the best among the sublinear preconditioners (with only a general cluster) for multilevel Toeplitz matrices.

     

Sur les automorphismes analytiques des variétés hyperboliques

Results of H. Cartan about holomorphic automorphisms on bounded domains are generalized to the case of hyperbolic manifolds in the sense of Kobayashi. In this setting, we give an identity theorem together with its topological version. We show also that a sequence of automorphisms which converges uniformly on some nonempty open set, has a limit on the whole space which is an automorphism. At the end of the paper, conditions are given for the sequence of iterates of a self holomorphic map in order to be an automorphism.     

Lightly crosslinked,mesomorphic networks obtained through the reaction of dimeric,liquid‐crystalline epoxy–imine monomers and heptanedioic acid

We reacted various dimeric, liquid‐crystalline epoxy–imine monomers, differing in the length of the central aliphatic spacer or the dipolar moments, with heptanedioic acid. The resulting systems showed a liquid‐crystalline phase in some cases, depending on the dimer and on the reaction conditions. The systems were characterized with respect to their mesomorphic properties and then were submitted to dynamic mechanical thermal analysis in both fixed‐frequency and frequency‐sweep modes in the shear sandwich configuration. The arrangement in the liquid‐crystalline phase seemed to be mainly affected both by the polarization of the mesogen and by the reaction temperature, which favored the liquid‐crystalline arrangement when it was lying in the range of stability of the dimer mesophase. In agreement with other recent literature data, dynamic mechanical thermal analysis results suggested that the presence of the mesogen directly incorporated into the main chain increased the lifetimes of the elastic modes both in the isotropic phase and in the liquid‐crystalline phase with respect to side‐chain liquid‐crystalline elastomers and that the time–temperature superposition principle did not hold through the liquid‐crystalline‐to‐isotropic transition. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:6270–6286, 2006     

N,N‐dimethylaminopyridine as initiator in the copolymerization of diglycidylether of bisphenol A with six‐membered cyclic carbonates

N,N‐Dimethylaminopyridine (DMAP) was used as initiator to cure mixtures of diglycidylether of bisphenol A (DGEBA) and 1,3‐dioxan‐2‐one (TMC) or 5,5‐dimethyl‐1,3‐dioxan‐2‐one (DMTMC). The curing was studied by differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the groups involved in the curing. We observed the formation of five‐membered cyclic carbonates and anionic carbonate groups that remain unreacted at the chain ends. The formation of these groups was explained by the attack of the anionic propagation species on the methylene carbon of the carbonate group, which leads to an alkyl‐oxygen rupture. By performing the cure in the thermobalance we could evaluate the loss of CO₂ produced in the samples containing carbonates. The kinetics were studied by DSC and analyzed with isoconversional procedures. The addition of carbonates slows down the curing rate. Thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA) experiments were used to evaluate the properties of the materials obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2873–2882, 2006     

New example of a non-heme mononuclear iron(IV) oxo complex. Spectroscopic data and oxidation activity

The green complex S=1 [(TPEN)FeO]2+ [TPEN=N,N,N',N'-tetrakis(2-pyridylmethyl)ethane-1,2-diamine] has been obtained by treating the [(TPEN)Fe]2+ precursor with meta-chloroperoxybenzoic acid (m-CPBA). This high-valent complex belongs to the emerging family of synthetic models of Fe(IV)=O intermediates invoked during the catalytic cycle of biological systems. This complex exhibits spectroscopic characteristics that are similar to those of other models reported recently with a similar amine/pyridine environment. Thanks to its relative stability, vibrational data in solution have been obtained by Fourier transform infrared. A comparison of the Fe=O and Fe=(18)O wavenumbers reveals that the Fe-oxo vibration is not a pure one. The ability of the green complex to oxidize small organic molecules has been studied. Mixtures of oxygenated products derived from two- or four-electron oxidations are obtained. The reactivity of this [FeO]2+ complex is then not straightforward, and different mechanisms may be involved.     

Organotin speciation in environmental matrices by automated on-line hydride generation-programmed temperature vaporization-capillary gas chromatography-mass spectrometry detection

In the present contribution, a new automated on-line hydride generation methodology was developed for dibutyltin and tributyltin speciation at the trace level, using a programmable temperature-vaporizing inlet followed by capillary gas chromatography coupled to mass spectrometry in the selected ion-monitoring mode acquisition (PTV-GC/MS(SIM)). The methodology involves a sequence defined by two running methods, the first one configured for hydride generation with sodium tetrahydroborate as derivatising agent and the second configured for speciation purposes, using a conventional autosampler and data acquisition controlled by the instrument's software. From the method-development experiments, it had been established that injector configuration has a great effect on the speciation of the actual methodology, particularly, the initial inlet temperature (-20 degrees C; He: 150 ml/min), injection volume (2 microl) and solvent characteristics using the solvent venting mode. Under optimized conditions, a remarkable instrumental performance including very good precision (RSD < 4%), excellent linear dynamic range (up to 50 microg/ml) and limits of detection of 0.12 microg/ml and 9 ng/ml, were obtained for dibutyltin and tributyltin, respectively. The feasibility of the present methodology was validated through assays upon in-house spiked water (2 ng/ml) and a certified reference sediment matrix (Community Bureau of Reference, CRM 462, Nr. 330 dibutyltin: 68+/-12 ng/g; tributyltin: 54+/-15 ng/g on dry mass basis), using liquid-liquid extraction (LLE) and solid-phase extraction (SPE) sample enrichment and multiple injections (2 x 5 microl) for sensitivity enhancement. The methodology evidenced high reproducibility, is easy to work-up, sensitive and showed to be a suitable alternative to replace the currently dedicated analytical systems for organotin speciation in environmental matrices at the trace level.