Eroded myelin figures

Myelin figures with unusual surface morphology were observed on contacting Tween85 with water. Myelins, which are normally smooth rodlike forms in other surfactants, are in this system found to be with an irregular, rough surface with vesiclelike structures adhered to the myelin tubes. Besides these, smooth myelin figures were also observed. We term the myelin figures with a rough surface eroded myelin figures. The same myelin could show a coexistence of smooth and rough areas with a sharp boundary between the smooth surface at one end whereas the other end shows a rough texture. The transformation of smooth myelins into eroded forms were observed often whereas the reverse is quite rare. In the later stage, the tip of the eroded myelin figures transforms into tentacles and acts as a source for new myelins and the growth of vesiclelike structures which were expelled into the surrounding medium. The eroded myelin figures are stable for a longer period in comparison to simple, smooth rodlike forms. By studying the myelin growth at different temperatures, it was found that eroded myelin figures were stable in the temperature range of 22-42 degrees C and at > 42 degrees C only smooth myelin figures were observed.     

Micro-Raman investigations of myelins in aerosol-OT/water system

Surfactant outgrowth during dissolution as myelin figures, which happens on contact with water, is of prime importance in emulsification and detergency. Micro-Raman investigation of different lyotropic phases formed during dissolution of aerosol-OT (bis 2-ethylhexyl sulfosuccinate) in water during myelin formation reveals the flexible arrangement of the surfactant bilayers in myelin. The conformation around CC-CS bond and the hydrocarbon chains of aerosol-OT in the different liquid crystalline phases were identified from the fingerprints of CC-CS stretching, C-C stretching, C-H bending, and stretching frequencies. Existence of mixture of trans and gauche conformations around CC-CS bond and that of the hydrocarbon chains in myelin supports the fluid nature of bilayers by which it is made. Similar conformations of hydrocarbon chains in lamellar phase and in myelin support the concept of myelins being rolled up lamella. The observations are in line with the disorderness of the hydrocarbon chains in the bilayers of phospholipids that has been reported earlier. From the C-C stretching frequencies at the root of myelins, the kinked structure of the hydrocarbon chain is identified, and loose packing of molecules which would facilitate water transport across membranes is evident.     

Sodium alginate/HPMC/liquid paraffin emulsified (o/w) gel beads,by factorial design approach; and in vitro analysis

The present study involved development of a novel sodium alginate (SA)/HPMC/light liquid paraffin emulsified (o/w) gel beads containing Diclofenac sodium (DS) as an active pharmaceutical ingredient and its site specific delivery by using hard gelatin capsule fabricated by enteric coated Eudragit L-100 polymer. Emulsified gel beads were formulated by 3-level factorial design, ionic gelatin method. The obtained beads were characterized by Fourier transform infrared, X-ray diffraction and Field emission scanning electron microscope analysis. The variables such as SA (X₁), HPMC (X₂), were optimized for drug loading and in vitro drug release with the help of response surface methodology (RSM). The RSM analysis predicted that SA was significant for both drug loading (p = 0.0005) and drug release (p = 0.0041). HPMC was only significant for drug release (p = 0.0154). The cross-product contribution (2FI) and quadratic model were found to be adequate and statistically accurate with correlation value (R²) of 0.9054 and 0.9450 to predict the drug loading and drug release respectively. An increase in concentration of HPMC and SA decreases the drug loading as well as the drug release. The obtained optimum values of drug loading and DS released were 7.43 % and 85.54 % respectively, which were well in agreement with the predicted value by RSM.     

Preparation and physicochemical characterization of carbamazepine (CBMZ): para-sulfonated calix[n]arene inclusion complexes

The formation of inclusion complexes with para-sulfonated calix[n]arene (PSC[n]A) was studied for carbamazepine (CBMZ), a poorly water soluble anticonvulsant drug. The effect of PSC[4]A and PSC[6]A on aqueous solubility of carbamazepine was studied extensively. The complete complexation of the drug was achieved after 48 h of shaking with PSC[n]A in water and evaporation of water to get solid complex. The interaction between PSC[n]A and CBMZ in solid state inclusion complexes was accomplished by aqueous phase solubility studies, HPLC, DSC, PXRD, FTIR, UV–Vis, and FT-Raman spectroscopy. The solubility of CBMZ increases as a function of PSC[n]A concentration. The results of the two phase solubility experiments are in good conformity to signify the formation of 1:1 (PSC[6]A:CBMZ) and 2:1 PSC[4]A:CBMZ complexes. The order of dissolution rate of CBMZ is inclusion complex > physical mixture > drug alone. The purpose of this study was to enhance solubility resulting in high dissolution rate and bioavailability of this essentially water insoluble drug.     

Study of layered silicate clays as synergistic nucleating agent for polypropylene

Effect of very small quantities of organically modified layered silicate clay on the nucleation of polypropylene (PP), as an additive at ppm levels dosage was investigated, in combination with two of the most commercially exploited organic nucleating agents, one of which is a cyclic aromatic phosphinate salt and the other is bis(3,4‐dimethylbenzylidene) sorbitol, each representing a separate class of nucleating molecules by itself. Substitution of a considerable fraction of either of these organic nucleating agents with organically modified inorganic nanoclay was seen to result in a unique synergy between the two in nucleating PP. Polarized light microscopy studies of these synergistic formulations with organoclay to nucleating agent ratios of 1:1 and 1:3 totaling 0.2 weight percent in PP showed significant reduction in spherulite size from that of non‐nucleated PP, and compared with the samples containing exclusive organic nucleating agent at similar loading. Differential scanning calorimetric studies provided evidence and insight into such synergistic behavior. Crystallization and supercooling temperatures for the synergistic formulations were comparable for those formulations containing only organic nucleating agents, indicating comparable nucleation efficiency, whereas organoclay alone, although showing some extent of nucleation, was clearly poorer in efficiency. Wide and small angle X‐ray scattering studies further explained these observations. An increase in the gamma polytype fraction was seen in samples that contained both organoclay and nucleating agent, pointing to the role of organoclay as a gamma nucleator. Organoclay was found to be completely exfoliated in these synergistic formulations and was seen as well‐dispersed, single platelets in the PP matrix. A hybrid network consisting of exfoliated organoclay platelets and organic nucleating agent molecules was proposed, which is more stable and stiffer than the network formed by nucleating agent alone. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1786–1794, 2010     

Liquid crystals based on calix[4]arene Schiff bases

New liquid crystals based on calix[4]arene Schiff base were prepared by the reaction of tetraamino-calix[4]arene with aldehydes (4-hydroxy benzaldehyde, 2-vanillin, 4-vanillin and 2-hydroxy naphthaldehyde). Dielectric investigations on a magnetically oriented sample forming N, SmA, and SmC phases were carried out. The dielectric constant (ε’ and ε”) and dielectric loss (tan δ) have been determined as a function of frequency (20 Hz–2 MHz). The synthesized derivatives were purified and characterized by FT-IR, ¹H-NMR, ¹³C-NMR and MALDI-TOF MS. All the synthesized compounds were investigated for liquid crystalline properties using DSC (Differential Scanning Calorimetry), DTA (Differential Thermal Analysis) and POM (Polarizing Optical Microscopy) attached with a hot stage. They generally exhibited nematic and typical fanlike or mosaic texture, which suggest the ordered smectic mesophases. Compounds were found to adopt a specific molecular structure due to the rigid bowl like calix[4]arene core, i.e., a cone-like structure with mesogenic units aligned within the molecule.     

Coumarine–imino–C2-glucosyl conjugate as receptor for Cu in blood serum milieu,on silica gel sheet and in Hep G2 cells and the characterization of the species of recognition

A coumarine–imino–C2-glucosyl conjugate (L) was synthesized and characterized. The conjugate L is found to recognize Cu²⁺ in aqueous HEPES buffer by exhibiting a 95% fluorescence quenching in pH range 7–10 even in the presence of several biologically and ecologically relevant metal ions. Fluorescence on–off behavior has been clearly demonstrated on the basis of the binding variability of Cu²⁺ to L. The binding has been elicited through the changes observed in fluorescence, absorption, ESI-MS and ¹H NMR titrations. All the other thirteen metal ions studied did not show any change in the fluorescence emission. These ions do not interfere with the recognition of Cu²⁺ by L. The structural features of [CuL]₂ complex in both the isomeric forms were established by DFT computational calculations. The utility of L has been demonstrated by showing its sensitivity toward Cu²⁺ on a thin layer of silica gel. The L gives sensitive fluorescence signals for Cu²⁺ even in blood serum and exhibits appropriate fluorescence responses in living cells.     

Synthesis of BF2 complexes of prodigiosin type oligopyrroles

We developed a simple, facile route for the synthesis of BF(2) complexes of prodigiosin type oligopyrroles and their cholesterol conjugates. This route gives an access to synthesize any desired meso-aryl-substituted 3-pyrrolyl BODIPYs which were not easily accessible earlier.     

Effect of annealing on contact performance and electrical properties of p-type high purity germanium single crystal

Van de Pauw Hall measurement is an effective method to characterize the properties of semiconductors, such as bulk concentration, mobility, and resistivity, all of which are used to describe the purity level in the semiconductors. However, the performance of the ohmic contacts has a direct impact on the reliability and accuracy of the results obtained from the Van de Pauw Hall measurement. In the present work, the influences of different annealing techniques on the performance of the InSn ohmic contacts have been investigated using a High Purity Germanium (HPGe) crystal sample. The results show that the preferred annealing condition is at 400 °C for 1 hour, which has provided a significant improvement of the InSn contact quality and microscopic homogenization of the impurities in the HPGe crystal. The carrier concentration, charge mobility, and resistivity of the sample annealed at 400 °C for 1 hour are 5.772×10¹⁰/cm³, 1.883×10⁴× cm²/Vs, and 5.795×10³×Ω?cm at 77 K, respectively.