Synthesis and characterization of molybdenum incorporated mesoporous aluminophosphate

A synthesis of molybdenum incorporated mesoporous aluminophosphate with long-chain n-alkylamine as template material had been prepared under non-aqueous condition. These materials were extensively characterized by using X-ray diffraction (XRD), nitrogen sorption isotherms, nuclear magnetic resonance of ²⁷Al and ³¹P (NMR), inductive coupled plasma (ICP), electron spin resonance (ESR), Fourier transform infrared (FTIR) and thermogravimetric-differential thermal analysis (TG-DTA). Morphology of the materials had been observed by using transmission electron microscope (TEM) that revealed the mesoporous materials possessed wormhole-like structures. Alkaline solvent extraction using n-butylamine/ethanol had been efficiently removed the n-alkylamine from the mesoporous samples which yielded BET surface areas around 550-730 m²/g. BJH analysis showed a narrow pore size distribution which increased with increasing of the carbon chain length of alkylamine (template). Valence state and coordination of the molybdenum in the obtained samples were investigated by using ESR and FTIR where it was found that Mo⁴⁺ and Mo⁶⁺ molybdenum species existed in the molybdenum incorporated mesoporous aluminophosphate in tetrahedral coordination.     

Temporal analysis of products (TAP) study on oxygen storage properties over Pt−Rh/CeO2 catalyst

The oxygen storage capacity of CeO₂, Ce_0.9Pr_0.1O₂, Pt?Rh/CeO₂ and Pt?Rh/Ce_0.9Pr_0.1O₂ was investigated by conventional GC pulse method and transient pulse techniques. It is shown that incorporation of PrO_y into CeO₂ matrix strongly promotes oxygen storage capacity (OSC) measured using the transient pulse technique. The improvement of OSC at low temperature is observed in Pt?Rh loaded onto CeO₂ and Ce?Pr catalysts.     

Organometallic chemistry related to applications for microelectronics in Japan

This is meant to be a brief overview of the developments of research activities in Japan on organometallic compounds related to their use in electronic and optoelectronic devices. The importance of organometallic compounds in the deposition of metal and semiconductor films for the fabrication of many electronic and opto-electronic devices cannot be exaggerated. Their scope has now extended to thin-film electronic ceramics and high-temperature oxide superconductors. A variety of organometallic compounds have been used as source materials in many types of processing procedures, such as metal–organic chemical vapor deposition (MOCVD), metalorganic vapor-phase epitaxy (MOVPE), metal–organic molecular-beam epitaxy (MOMBE), etc. Deposited materials include silicon, Group III–V and II–VI compound semiconductors, metals, superconducting oxides and other inorganic materials. Organometallic compounds are utilized as such in many electronic and optoelectronic devices; examples are conducting and semiconducting materials, photovoltaic, photochromic, electrochromic and nonlinear optical materials. This review consists of two parts: (I) research related to the fabrication of semiconductor, metal and inorganic materials; and (II) research related to the direct use of organometallic materials and basic fundamental research.     

A novel solvent dipole-induced rotational isomerism of 1-hxdroxy-2-pyridone in the excited singlet state

The title compound shows dual fluorescence depending on polarity of the solvent used. The fluorescence in the nonpolar solvent, cyclohexane, has a maximuni at 370 nm, while the fluorescence in the polar solvent, methanol, has a maximum at 400nm. The short and long wavelength fluorescences were assigned to the syn and anti conformers, respectively. From these observations one is allowed to conclude that a novel solvent dipole-induced rotational isomerism takes place in the excited singlet state.     

Ni-catalyzed alkylative dimerization of vinyl grignard reagents using alkyl fluorides

Alkyl halides underwent unique cross-coupling reaction with vinylmagnesium chloride in the presence of Ni catalyst to give 2-alkyl-3-butenyl Grignard reagent (1) in high yields. This reaction proceeded efficiently at 25 degrees C in THF using primary and secondary alkyl fluorides. On the other hand, PhCH=CHMgBr gave double alkylative vinyl coupling product 4 in good yield as the sole coupling product. Alkyl fluorides react as the most suitable alkylating reagent in comparison to the corresponding chlorides, bromides, and iodides.     

A [2]rotaxane capped by a cyclodextrin and a guest: formation of supramolecular [2]rotaxane polymer

A [2]rotaxane capped by a beta-cyclodextrin and a 2,4,6-trinitrophenyl group has been prepared by dissolving 6-aminocinnamoyl beta-cyclodextrin in water with 1-adamantane carboxylic acid and complexation with alpha-cyclodextrin followed by the reaction with 2,4,6-trinitrobenzene sulfonic acid sodium salt. The [2]rotaxane has been found to form supramolecular polymers by host-guest interactions.     

Chiral recognition of amino acids and dipeptides by a water-soluble zinc porphyrin

A chiral water-soluble zinc porphyrin was optically resolved on a chiral HPLC column, and the binding of chiral amino acids and peptides to each of the enantiomers was examined spectrophotometrically in basic aqueous solution. The binding data apparently indicated that the zinc porphyrin has chiral selectivity for amino acids and dipeptides. This was reasonably explained in terms of the triple cooperation of coordination, Coulomb, and steric interactions of the chiral amino carboxylates with the porphyrin. A compensatory relationship among the thermodynamic parameters for chiral recognition was also shown.     

Activity characterization of 192Ir brachytherapy wires

Summary The radionuclide ¹⁹²Ir has been increasingly used as a brachytherapy source and manufactured in different geometry forms (thin wires, hairpins, needles or point sources). A procedure for the characterization of the activity content of ¹⁹²Ir wire sources was developed in order to establish the secondary standard activity measurement system based on the ionization chamber set up at Brazilian National Laboratory for Ionizing Radiation Metrology (LNMRI). Firstly, the ion current of the ionization chamber is measured and, subsequently, the activity is determined in a destructive analysis. This procedure enables obtaining the calibration factor for wire sources that can be used for further activity determination of similar sources in a non-destructive analysis. Accurate activity determination is needed for dosimetric measurements and for helping the manufacturers to improve its quality control programs.     

Optical microscopy and in situ Raman scattering of single crystalline ethylene hydrate and binary methane-ethylene hydrate at high pressures

Visual observations through a microscope and in situ Raman measurements have been made for single crystalline ethylene hydrate (EH) and binary methane-ethylene hydrate (MEH) at pressures up to 3.7 GPa and room temperature. Both hydrates showed pressure-induced phase transitions at 1.6, 2.0, and 3.0 GPa for EH and at 1.7, 2.1, and 3.3 GPa for MEH. The cubic sI phase of EH and MEH remains stable up to 1.6 and 1.7 GPa, respectively, which are more widely ranging values than the values for the methane hydrate sI phase. In this sI phase of binary MEH, the cage occupancies by methane and ethylene molecules are investigated from Raman spectra. Above P = 3.0 GPa for EH and 3.3 GPa for MEH, they decomposed by associating with the formation of the polyethylene.