Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

Thermal analysis of lanthanide polyphosphates

Summary A study of thermal analysis of some lanthanide polyphosphates has been reported. The DTA curves of Ce, Pr and Sm polyphosphates were of similar nature. They exhibited a sharp exothermic peak indicating crystallization temperature (T _c) around 520 °C. However, no peak indicatingT _m was observed upto 800 °C. TG curves of Ce, La, Pr, Sm, Y polyphosphates indicated weight loss occurring in three stages. The integral procedural decomposition thermal analysis (ipdt) indicated that these materials had refractory nature.With 4 figures and 2 tables     

Floating spherical Gaussian orbital model study of average electric polarisabilities and magnetic susceptibilities: Some aliphatic hydrocarbons

Floating spherical Gaussian orbital model is used to discuss the average electric polarisabilities and magnetic susceptibilities of a series of hydrocarbons. It has been noticed that the core contributions are negligibly small and these quantities (average electric polarisabilities and magnetic susceptibilities) can be well estimated from contributions localised on bond Gaussians.     

1-Phenyl-6,7-disubstituted-aminopropyl)-1,2,3,4-tetrahydroisoquinolines as possible antituberculer agents

The Condensation of 3,4-disubstituted phenylethylamine and benzaldehyde furnished l-phenyl-6,7-disubstituted-1,2,3,4-tetrahydroisoquinolines l. which on reaction with 1,3-dibromopropane gave l-phenyl-6,7-disubstituted-2-(3-bromoprophyl)-1,2,3,4-tetrahydroisoquinolines 2. The reaction of 2 with different secondary amines resulted in the synthesis of 3. The compounds 3 were screened for their in vitro antituberculer activity against Mycobacterium smegmatis, and some of them have been found to be total inhibitors of M. Smegmatis     

Rapid determination of molybdenum in ferromolybdenum and molybdenum additives, with oxine

A rapid method is presented for the gravimetric determination of molybdenum (as the oxinate) in ferromolybdenum and molybdenum additives. The sample is fused with a mixed flux of sodium peroxide and sodium carbonate in a zirconium crucible for complete decomposition. Leaching the cooled fusion cake with water provides instantaneous separation of molybdenum as sodium molybdate from iron(III) and other hydrous oxides. After filtration, the molybdenum is precipitated with oxine after addition of EDTA and oxalate to obviate interference from other metal oxinates, and determined gravimetrically. The precision and accuracy are comparable to those of referee methods.     

Self-assembled,wormlike-cylinder network of polystyrene-block-poly(ethylene oxide) micelles in solution

We report the formation of a highly entangled and interconnected, self-assembled, wormlike-cylinder network of polystyrene-block-poly(ethylene oxide) in N, N-dimethylformamide/water. In this system, N,N-dimethylformamide was a common solvent and water was a selective solvent for the poly(ethylene oxide) blocks. The degrees of polymerization of the polystyrene and poly(ethylene oxide) blocks were 962 and 227, respectively. The network was formed at copolymer concentrations higher than 0.4 wt % and consisted of self-assembled, wormlike cylinders that were interconnected by Y-shaped, T-shaped, and multiple junctions. The network morphology was visualized with transmission electron microscopy. Capillary viscometry measurements revealed an order-of-magnitude increase in the inherent viscosity of the colloidal system upon the formation of the network. A similar effort to obtain a wormlike-cylinder network in an N,N-dimethylformamide/acetonitrile system, in which acetonitrile was a selective solvent for the poly(ethylene oxide) blocks, was unsuccessful even at high copolymer concentrations; instead, the wormlike cylinders showed a tendency to align. The viscosity measurements also did not show a substantial increase in the inherent viscosity. Thus, the solvent played a critical role in determining the formation of the self-assembled, wormlike-cylinder network. This formation of the network resulted from an interplay between the end-capping energy, bending energy (curvature), and configurational entropy of the self-assembled, wormlike-cylinder micelles that minimized the free energy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3605–3611, 2006     

Rapid spectrophotonietric determination of copper in steel with zinc dibenzyldithiocarbamate

A rapid spectrophotometric method employing zinc dibenzyldithiocarbamate is described for determining copper in a wide variety of steels. The acidity is not critical (0.5-2N) and the colour of the complex is stable for > 1 hr. The range of the method is 0.005-5% copper and 6 samples can be analysed in about an hour.     

Synthesis and stereochemical assignment of 7-arylidene and 7-heteroarylidene morphinan-6-ones

A number of (E)-7-arylidenenaltrexones were synthesized by azeotropic distillation of water from a benzene solution of naltrexone and an aromatic aldehyde (benzaldehyde, 4-chloro- and 4-fluorobenzaldehyde, 3-and 4-pyridinecarboxaldehyde and 1-methyl-2-imidazolecarboxaldehyde) using piperidine as a catalyst. In addition, (E)-7-benzylidenenaloxone was prepared by the previously published Claisen-Schmidt condensation using sodium hydroxide in methanol. The stereochemistry of these arylidene derivatives 3–9 was determined to be (E) by means of nuclear Overhauser enhancement experiments. The ¹³C nmr spectra of (E)- 3–9 are recorded in deuteriochloroform and those of the hydrochlorides in deuteriodimethyl sulfoxide.     

Studies in inorganic polyelectrolytes — Part II

Viscosity behaviour of several samples ofGraham's salt with varying molecular weight has been studied. Reduced viscosity (η _sp /c) versus concentration curves were found to be characteristic of polyelectrolytes. They are dependent on the molecular weight and can be reduced to straight lines by plotting the reciprocal of the reduced viscosity against the square root of concentration. The intrinsic viscosities obtained by extrapolation were found to be proportional to the square of molecular weights. The value of reduced viscosity at any particular concentration in the concentration range between 0.25% and 4.0% was linearly related to the molecular weight. Reduced viscosities were found to decrease considerably on addition of electrolytes. Reduced viscosity versus added salt concentration curves were remarkably molecular weight dependent. The p_H of the medium seemed to have no effect at all. Bivalent salts reduce the viscosity to a much greater extent than monovalent ones. By keeping the concentration of the added salt constant and varying that ofGraham's salt, curves showing hump which disappeared at higher concentration of the added salt, were obtained. In the action of electrolytes the more important factor is the valency of cation rather than the ionic strength of the medium. Most observations confirm the already well-establishedFolding-Chain Theory of polyelectrolytes developed byKatchalsky, Fuoss and others.