Preparation and mechanical properties of layers made of recombinant spider silk proteins and silk from silk worm

Layers of recombinant spider silks and native silks from silk worms were prepared by spin-coating and casting of various solutions. FT-IR spectra were recorded to investigate the influence of the different mechanical stress occurring during the preparation of the silk layers. The solubility of the recombinant spider silk proteins SO1-ELP, C16, AQ24NR3, and of the silk fibroin from Bombyx mori were investigated in hexafluorisopropanol, ionic liquids and concentrated salt solutions. The morphology and thickness of the layers were determined by Atomic Force Microscopy (AFM) or with a profilometer. The mechanical behaviour was investigated by acoustic impedance analysis by using a quartz crystal microbalance (QCMB) as well as by microindentation. The density of silk layers (d<300 nm) was determined based on AFM and QCMB measurements. At silk layers thicker than 300 nm significant changes of the half-band-half width can be correlated with increasing energy dissipation. Microhardness measurements demonstrate that recombinant spider silk and sericine-free Bombyx mori silk layers achieve higher elastic penetration modules E_EP and Martens hardness values H_M than those of polyethylenterephthalate (PET) and polyetherimide (PEI) foils.     

A calculation of the spin-orbit splitting of the X 2Π state of NO

Using Brion, Moser and Yamazaki's SCF LCAO MO the spin orbit splitting of the X ² state of NO has been calculated using various potentials. Experimentally W (² _3/2) –W (² _1/2) is known to be 122 cm^–1. Using an unscreened nuclear field we find a value of 328 cm^–1. Inclusion of screening due to electronic repulsions reduces this value to 283 cm^–1. Agreement with the experimental value may be obtained by reducing the orbital exponents in the 2 molecular orbital by 30% over the value given by Slater's rules.

---

Zusammenfassung Die Spin-Bahn-Aufspaltung des X ² -Zustandes von NO wurde mit verschiedenen Potentialen unter Verwendung der SCF LCAO MOs von Brion, Moser und Yamazaki berechnet. Der experimentelle Wert für W (² _3/2) –W (² _1/2) beträgt 122 cm^–1. Die Rechnung mittels eines reinen Kernfeldes liefert den Wert 328 cm^–1 und unter Einschluß der Abschirmung durch die Elektronen 283 cm^–1. Übereinstimmung mit dem experimentellen Wert läßt sich erzielen, wenn man den Exponenten des 2-Zustandes 30% kleiner als nach den Slater Regeln macht.

---

Résumé Avec les orbitals moléculaires SCF LCAO de Brion, Moses et Yamazaki, nous avons calculé le dédoublement spin-orbitale de l'état X ² de NO. La valeur expérimentale W (² _3/2) –W (² _1/2) est 122 cm^–1. Dans un champ nucléaire «sans écran» on trouve 328 cm^–1. L'inclu-sion de l'effet d'écran dû aux répulsions interélectroniques réduit cette valeur à 283 cm^–1. La valeur expérimentale s'obtient, si l'on réduit de 30% les exposants d'après Slater dans l'orbi-tale moléculaire 2.

     

Enhanced ethanol sensing properties of WO3 modified TiO2 nanorods

Pristine and WO₃ decorated TiO₂ nanorods (NRs) were synthesised to investigate n-n-type heterojunction gas sensing properties. TiO₂ NRs were fabricated via hydrothermal method on fluorine-doped tin oxide coated glass (FTO) substrates. Then, tungsten was sputtered on the TiO₂ NRs and thermally oxidised to obtain WO₃ nanoparticles. The heterostructure was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectroscopy. Fabricated sensor devices were exposed to VOCs such as toluene, xylene, acetone and ethanol, and humidity at different operation temperatures. Experimental results demonstrated that the heterostructure has better sensor response toward ethanol at 200 °C. Enhanced sensing properties are attributed to the heterojunction formation by decorating TiO₂ NRs with WO₃.     

Arene C−H Activation at Aluminium(I): meta Selectivity Driven by the Electronics of SNAr Chemistry

The reactivity of the electron-rich anionic Al^I aluminyl compound K₂[(NON)Al]₂ (NON=4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl-9,9-dimethylxanthene) towards mono- and disubstituted arenes is reported. C−H activation chemistry with n-butylbenzene gives exclusively the product of activation at the arene meta position. Mechanistically, this transformation proceeds in a single step via a concerted Meisenheimer-type transition state. Selectivity is therefore based on similar electronic factors to classical S_NAr chemistry, which implies the destabilisation of transition states featuring electron-donating groups in either ortho or para positions. In the cases of toluene and the three isomers of xylene, benzylic C−H activation is also possible, with the product(s) formed reflecting the feasibility (or otherwise) of competing arene C−H activation at a site which is neither ortho nor para to a methyl substituent.     

Flowerlike hybrid horseradish peroxidase nanobiocatalyst for the polymerization of guaiacol

In this study, the catalytic activity and stability of flowerlike hybrid horseradish peroxidase (HRP) nanobiocatalyst (HRP-Cu ²⁺ ) obtained from Cu ²⁺ ions and HRP enzyme in the polymerization reaction of guaiacol were analyzed. We demonstrated that HRP-Cu ²⁺ and hydrogen peroxide (H ₂ O ₂ ) initiator showed significantly increased catalytic activity and stability on the polymerization of guaiacol compared to that of free HRP enzyme. Poly(guaiacol) was observed with quite high yields (88%) and molecular weights (38,000 g/mol) under pH 7.4 phosphate-buffered saline (PBS) conditions at 60 °C with 5 weight% of HRP-Cu ²⁺ loading. HRP-Cu ²⁺ also shows very high thermal stability and works even at 70 °C reaction temperature; free HRP enzyme denatures at that temperature. Furthermore, HRP-Cu ²⁺ provided considerable repeated use and showed some degree of catalytic activity, even after the fourth recycle, in the polymerization of guaiacol.     

Chemical composition,antimicrobial, and lipase enzyme activity of essential oil and solvent extracts from Serapias orientalis subsp. orientalis

The volatile components of essential oil (EO), SPME, and SPME of solvent extracts ( n -hexane, methanol, and water) obtained from fresh Serapias orientalis subsp. orientalis ( Soo ) were analyzed by GC-FID/MS. EO of Soo gave 11 compounds in the percentage of 99.97%; capronaldehyde (37.01%), 2-( E )-hexenal (23.19%), and n -nonanal (19.05%) were found to be major constituents. SPME GC-FID/MS analyses of fresh plant and solvent extracts of Soo revealed 7, 12, 7, and 4 compounds within the range of 99.7% to 99.9%. Limonene (76.5%, 41.7%, and 61.3%) was the major compound in SPMEs of the n -hexane and methanol extracts. α -Methoxy- p -cresol (52.9%) was the main component in its water extract. The antimicrobial activity of EO and the solvent extracts of Soo were screened against 9microorganisms. EO showed the best activity against Mycobacterium smegmatis , with 79.5 µg/mL MIC value. The n -hexane, methanol, and water extracts were the most active against the Staphylococcus aureus within the range of 81.25–125.0 µg/mL (MIC). IC ₅₀ values for the lipase enzyme inhibitory activity of EO and solvent extracts ( n -hexane, methanol, and water) were determined to be 59.87 µg/mL, 64.03 µg/mL, 101.91 µg/mL, and 121.24 µg/mL, respectively.     

Phase transitions in lattice gas models for water

Water-like lattice gases on the triangular and body-centered cubic lattices are investigated. Molecules may reside on the lattice sites in either of two possible orientations, a hydrogen bond being formed between molecules on neighboring sites if they have the proper orientation with respect to one another. For a range of chemical potential at sufficiently low temperatures, the models are shown to have an ordered phase consisting of an open, hydrogen-bonded, icelike structure. The models are shown to be transitionfree at sufficiently high temperature, indicating the existence of a critical point.Research supported in part by the U.S. National Science Foundation, Grant CHE-7726177, and by The Robert A. Welch Foundation, Grant P-446.