Experimental and theoretical studies of the quenching of Li(3p,4p) by N2

Quenching mechanisms of the Li3p and Li4p states in collision with the nitrogen molecule are studied by laser-induced fluorescence spectroscopy and by a quantum chemical calculation. The Li3p state is observed to be efficiently quenched to the Li3s state detected as intense 3s-->2p emission. The Li4p state is efficiently quenched to the Li4s and Li3d states detected as 4s-2p and 3d-2p emissions, respectively. The potential-energy surfaces for the Li(2s-4p)N2 states show a large number of conical intersections and avoided crossings resulting from the couplings between the ionic [Li+(N2)-] and covalent configurations. There are a large number of stable excited states, and we give here the spectroscopic constants for the lowest two stable isomers correlating to Li2p+N2.     

Mechanism and nanosize products of the sol-gel reaction using diphenylsilanediol and 3-methacryloxypropyltrimethoxysilane as precursors

We use a first-principles calculation and small-angle neutron scattering (SANS) to investigate the mechanism and the nanosize products of the sol-gel reaction with diphenylsilanediol (DPD) and 3-methacryloxypropyltrimethoxysilane (MEMO) precursors in synthesizing a hybrid waveguide material. It is predicted that switching between a DPD hydroxyl and a MEMO methoxy with a reaction rate of 6.8 x 10(-6) s(-1) at 300 K is the fastest process for the first reaction step, thus generating diphenylmethoxysilanol (DPM) and 3-methacryloxypropyldimethoxysilanol (MEDO) as products. However, we determine that this reaction pathway could be modified by the presence of the H2O released from a catalyst such as Ba(OH)2.H2O. Next, switching between the DPM hydroxyl and the MEDO methoxy is followed to generate diphenyldimethoxysilane (DPDM) and 3-methacryloxypropylmethoxysilanediol (MEMDO). However, condensation between a MEMDO hydroxyl and a DPDM methoxy is found to be most favorable for the third reaction step, which generates the DPDM-MEMDO dimer and CH3OH molecule as products. In a similar fashion, a DPDM methoxy of the DPDM-MEMDO dimer can condense with a MEMDO hydroxyl of the second DPDM-MEMDO dimer to increase the chain, but its reaction rate of 2.8 x 10(-11) s(-1) is predicted to be about 5 times smaller than that between a DPDM methoxy and a MEMDO hydroxyl. This implies that the reaction rate for the larger nanostructures becomes smaller. Additionally, our SANS measurements determine that the final products from our sol-gel reaction are on the nanometer scale, at sizes from 1.76 to 2.36 nm.     

Dynamic kinetic resolution of atropisomeric amides

[reaction: see text] Using L-proline as catalyst in the asymmetric aldol reaction and a series of benzamides and naphthamides, we have accomplished a dynamic kinetic resolution that simultaneously establishes the stereochemistry of the atropisomeric amide's chiral axis and a stereogenic center. The enantioselectivities ranged from 82% to 95% and the diastereoselectivities from 2.1:1 to 7.0:1.     

The Predissociation of the 1(3)Sigma(-)(g) State of (7)Li(2)

The predissociation of the 1(3)Sigma(-)(g) v >/= 10 levels of (7)Li(2) has been observed by pulsed and continuous-wave perturbation-facilitated optical-optical double-resonance spectroscopy (PFOODR). Our ab initio calculation shows that the inner wall of the 1(3)Sigma(-)(g) potential intersects the 1(3)Pi(g) repulsive potential at internuclear distance R = 2.00 ?. The predissociation is due to a DeltaS = 0, DeltaLambda = +/-1 rotational-electronic interaction with the repulsive 1(3)Pi(g) state. Copyright 2001 Academic Press.     

Divergent strategy for the synthesis of bottlebrush polymers via postpolymerization modification of macromonomer

A simple and divergent synthetic strategy of bottlebrush polymers (BBPs) is presented, consisting of postpolymerization modification of a macromonomer and grafting-through polymerization. Beginning with a single macromonomer, its direct modification could build a library of macromonomers with an identical chain length, thus guaranteeing the precision in the synthesis of BBPs. In this study, a newly designed norbornenyl-terminated poly(methyl acrylate) (NB-PMA) is proposed as a chemically robust template. Ti-mediated transesterification of NB-PMA successfully produces structurally diverse polyacrylates while maintaining the terminal norbornenyl group intact. All macromonomers obtained from transesterification possess a good grafting-through ring-opening metathesis polymerization reactivity, furnishing homo, random, and block BBPs in a controllable manner. Moreover, atomic force microscopy analysis supports the controlled side-chain length distribution in the resulting BBPs.     

Highly concentrated catalytic asymmetric allylation of ketones

[reaction: see text] We report the catalytic asymmetric allylation of ketones under highly concentrated reaction conditions with a catalyst generated from titanium tetraisopropoxide and BINOL (1:2 ratio) in the presence of isopropanol. This catalyst promotes the addition of tetraallylstannane to a variety of ketones to produce tertiary homoallylic alcohols in excellent yield (80-99%) with high enantioselectivities (79-95%). The resulting homoallylic alcohols can also be epoxidized in situ using tert-butyl hydroperoxide (TBHP) to afford cyclic epoxy alcohols in high yield (84-87%).     

Oxaaza macrocycles constructed on poly(ethylenimine) through Ni(II)-template cyclization and their metal binding

Polymeric oxaaza macrocycles (PEI-OAM) are constructed on poly(ethylenimine) (PEI) by Ni(II)-template alkylation of PEI with diethyleneglycol ditosylate. The K_f values for Ni(II), Cu(II), and Zn(II) complexes of PEI–OAM are measured at pH 3.5–10 at 25°C. At pH 7, log K_f values for these complexes are 9–15, indicating that the polymeric oxaaza macrocycles can readily reduce concentrations of these metal ions below ppb level. Metal binding ability of nonpolymeric oxaaza macrocyclic compounds reported in the literature decreases rapidly as pH is lowered below 7, whereas that of PEI–OAM decreases to lesser extents. This is attributed to the electrostatic effects exerted by the ammonium ions of PEI backbone. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 527–532, 1997.     

Flowfield characteristics on a vent slot mixer in supersonic flow

A research was conducted on a new mixing device referred as a “vent slot mixer”, using experimental and computational methods. The experiment was conducted in a laboratory-scale supersonic wind-tunnel of Mach number 2. Inflow air was under atmospheric air condition, and hydrogen gas was used as fuel. In addition, the computational simulation approach was performed to support the experimental result. The vent slot mixer can directly entrain the main airflow into the recirculation region, inducing complex flow structures in the recirculation region. This also leads to gradual development of the shear layer to reduce the total pressure loss mainly induced by a recompression shock. Contrary to typical shear layers of step mixer, for the vent slot mixer, two-dimensional large-scale structures and weak shocks were clearly identified around the shear layer through experimental and computational methods. When the fuel was injected from one circular injector in the recirculation region, the high fuel concentration of the vent slot mixer was evenly distributed along the spanwise direction, but with the step mixer the fuel was highly concentrated along the region downstream of the injector. Therefore, the vent slot mixer is effective to uniformly spread the fuel toward the spanwise direction in the recirculation region. As the fuel injection rate increased, the shear layer downstream of the vent slot mixer grew uniformly along the spanwise direction; consequently, shock structures such as a recompression shock and weak shocks on the shear layer were significantly mitigated at J = 3.2.     

Theoretically calculated rovibronic transition spectra of KRb

Spectroscopic properties of all the electronic states of KRb dissociating into 4s(K) + 5s(Rb), 4s(K) + 5p(Rb), 4p(K) + 5s(Rb), and 4s(K) + 4d(Rb) and some higher-lying excited states are studied with ab initio calculations. Spectroscopic constants, dipole moments, and the nature of the electronic wave functions for these states are reported. Intensities for the singlet-singlet and triplet-triplet transitions are theoretically calculated from the potential energy curves and the transition dipole moments. © 1996 John Wiley & Sons, Inc.     

Silver(I) ion selective ionophores containing dithiocarbamoyl moieties on steroid backbone

Tweezer-type and non-tweezer-type ionophores containing dithiocarbamoyl groups on a 7-deoxycholic amide or cholane derivatives were designed and synthesized. Potentiometric evaluation of the poly(vinyl chloride) (PVC) membranes containing those deoxycholic amides/cholanes linked with tweezer-type dithiocarbamoyl moieties showed excellent affinity and selectivity to silver(I) ion over alkali, alkaline earth and other transition metal cations. On the other hand, deoxycholic amides/cholanes substituted with one dithiocarbamoyl group, i.e., non-tweezer-type ionophores, resulted in relatively poor potentiometric sensitivity and detection limits. The enhanced potentiometric properties of newly synthesized tweezer-type dithiocarbamoyl containing ionophores have been further improved by employing silver ion complexing reagent in the internal reference solution, which resulted in greatly reduced detection limit (∼100 ppt) for the electrodes based on them.