Measurements of radon concentration in drinking water samples from Kastamonu (Turkey)

Concentration of (222)Rn was determined in selected natural spring and tap water samples collected during spring and summer seasons from Kastamonu, Turkey. The aim of this work was to produce a map of the radon concentrations in water sources of the province and to determine any potential radiological risk for the local population. Radon measurements were performed by an AlphaGUARD radon gas analyser. The average radon concentrations were found to vary from 0.39±0.02 to 12.73±0.39?Bq?l(-1) for natural springs and from 0.36±0.04 to 9.29±0.45?Bq?l(-1) for tap water in spring, from 0.50±0.09 to 19.21±1.00?Bq?l(-1) for natural springs and from 0.31±0.03 to 13.14±0.38?Bq?l(-1) for tap water in summer. Furthermore, the results are compared with international recommendations and concentrations reported for other countries. Doses resulting from the consumption of these waters were calculated. The effective dose equivalents due to the intake of the (222)Rn present in these waters are expected to range from 0.93 to 32.54?μSv?y(-1) in summer and from 0.80 to 49.09?μSv?y(-1) in spring.     

Probing the microstructural evolution of polyviologen-silica hybrid nanopowders during intermediate processing using X-ray microtomography

Polyviologen polymers are potential template agents for hydrolytic sol–gel processing of silica particles. The resultant polyviologen-silica hybrid nanopowders are amorphous aggregates of roughly spherical shape, which can be harvested from the sol–gel solution and processed to green body products under different environmental conditions. A bench-top X-ray microtomography system, with a spatial resolution of 5 μm is used to produce three-dimensional images of the dynamic processing of the nanopowders. Various processing routes are imaged using a custom built environmental chamber where the temperature, atmospheric pressure, and compaction force can be controlled. This allows processes such as vacuum sintering and microwave sintering to be studied. The three-dimensional images reveal the axial and radial distributions of the molten polyviologen polymer within a matrix of agglomerates of the silica nanoparticles. Such observations are crucial to the optimisation of the processes that are used to produce the green body products so as to preserve desirable nano-intensive properties. PACS 82.35.Np; 87.59.-e; 81.07.Pr; 87.59.Bh     

Measurements of radon concentration in drinking water samples from Kastamonu (Turkey)

Concentration of ²²²Rn was determined in selected natural spring and tap water samples collected during spring and summer seasons from Kastamonu, Turkey. The aim of this work was to produce a map of the radon concentrations in water sources of the province and to determine any potential radiological risk for the local population. Radon measurements were performed by an AlphaGUARD radon gas analyser. The average radon concentrations were found to vary from 0.39±0.02 to 12.73±0.39 Bq l^?1 for natural springs and from 0.36±0.04 to 9.29±0.45 Bq l^?1 for tap water in spring, from 0.50±0.09 to 19.21±1.00 Bq l^?1 for natural springs and from 0.31±0.03 to 13.14±0.38 Bq l^?1 for tap water in summer. Furthermore, the results are compared with international recommendations and concentrations reported for other countries. Doses resulting from the consumption of these waters were calculated. The effective dose equivalents due to the intake of the ²²²Rn present in these waters are expected to range from 0.93 to 32.54 μSv y^?1 in summer and from 0.80 to 49.09 μSv y^?1 in spring.     

Speciation of Cr(III) and Cr(VI) in Environmental Samples after Solid Phase Extraction on Amberlite XAD–2000

A method for speciation of Cr(III) and Cr(VI) in real samples has been developed. Cr(VI) has been separated from Cr(III) and preconcentrated as its pyrrolidinedithiocarbamate (APDC) complex by using a column containing Amberlite XAD–2000 resin and determined by FAAS. Total chromium has also been determined by FAAS after conversion of Cr(III) to Cr(VI) by oxidation with KMnO₄. Cr(III) has been calculated by subtracting Cr(VI) from the total. The effect of pH, flow‐rate, adsorption and batch capacity and effect of various metal cations and salt anions on the sorption onto the resin were investigated. The adsorption is quantitative in the pH range of 1.5–2.5, and Cr(VI) ion was desorbed by using H₂SO₄ in acetone. The recovery of Cr(VI) was 97 ± 4 at a 95% confidence level. The highest preconcentration factor was 80 for a 200 mL sample volume. The adsorption and batch capacity of sorbent were 7.4 and 8.0 mg g^?1 Cr(VI), respectively, and loading half time was 5.0 min. The detection limit of Cr(VI) is 0.6 μg/L. The procedure has been applied to the determination and speciation of chromium in stream water, tap water, mineral spring water and spring water. Also, the proposed method was applied to total chromium preconcentration in microwave digested moss and rock samples with satisfactory results. The developed method was validated with CRM‐TMDW‐500 (Certified Reference Material Trace Metals in Drinking Water) and BCR‐CRM 144R s (Certified Reference Material Sewage Sludge, Domestic Origin) and the results obtained were in good agreement with the certified values. The relative standard deviations were below 6%.     

Simulation and micro-fabrication of optically switchable split ring resonators

The effect of conductivity variation as a proposed method for the investigation of photoconductive switching properties of split ring resonators (SRRs) is simulated. Three different systems that are applicable under certain fabrication and/or optical excitation conditions are described. The simulated transmission spectrum indicates that for a large range of dark conductivity values, complete switching of the SRR resonance is possible. One of the simulated systems, involving split ring resonators on Si substrate, was fabricated and characterized. The transmission spectrum of that system was measured, with the Si in its high-resistivity state, and a −60 dB dip between 108 and 115 GHz, due to SRRs magnetic resonance, was observed.     

Experimental and theoretical investigation of the drilling of alumina ceramic using Nd:YAG pulsed laser

Alumina ceramics have found wide range of applications from semiconductors, communication technologies, medical devices, automotive to aerospace industries. Processing of alumina ceramics is rather difficult due to its high degree of brittleness, hardness, low thermal diffusivity and conductivity. Rapid improvements in laser technologies in recent years make the laser among the most convenient processing tools for difficult-to-machine materials such as hardened metals, ceramics and composites. This is particularly evident as lasers have become an inexpensive and controllable alternative to conventional hole drilling methods. This paper reports theoretical and experimental results of drilling the alumina ceramic with thicknesses of 5 mm and 10.5 mm using milisecond pulsed Nd:YAG laser. Effects of the laser peak power, pulse duration, repetition rate and focal plane position have been determined using optical and Scanning Electron Microscopy (SEM) images taken from cross-sections of the drilled alumina ceramic samples. In addition to dimensional analysis of the samples, microstructural investigations have also been examined. It has been observed that, the depth of the crater can be controlled as a function of the peak power and the pulse duration for a single laser pulse application without any defect. Crater depth can be increased by increasing the number of laser pulses with some defects. In addition to experimental work, conditions have been simulated using ANYS FLUENT package providing results, which are in good agreement with the experimental results.     

Analytical investigation of energy spectrums of beta rays emitted from <Superscript>90</Superscript>Sr and <Superscript>204</Superscript>Tl radioisotopes

The energy spectra of beta rays emitted from ⁹⁰Sr and ²⁰⁴Tl radioisotopes were obtained by using a silicon surface barrier detector with a 1000 μm depleted layer and 50 mm² effective area. The detector response function is interpreted by making use of range distributions of mono-energetic electrons in matter and by assuming a linear energy loss along the range in the depleted layer of the detector. An analytical expression is given for pulse height distribution obtained in the surface barrier detector. A good agreement is observed between the experimental results and theoretical interpretation.