Spectrophotometric and AAS determination of trace amounts of cobalt after preconcentration by using alpha-benzilmonoxime-microcrystalline naphthalene.

The formed cobalt-a-benzilmonoxime complex was adsorbed onto microcrystalline naphthalene. Then it was determined by zero and first derivative spectrophotometry and by atomic absorption spectrophotometry (AAS) after dissolving into chloroform and methylisobutylketone (MIBK), respectively. Under optimum conditions, cobalt in the range of 1.0 - 20.0, 0.4 - 30.0 and 2.5 - 50.0 microg could be determined by spectrophotometry, first derivative spectrophotometry and AAS method, respectively. By the method, a preconcentration factor equal to approximately 30 for cobalt was obtained. The effect of diverse ions on the determination of 5.0 microg cobalt was also studied. The method was successfully applied to some pharmaceuticals and synthetic alloy samples.     

Highly functionalized pyrazolines from symmetric and asymmetric 1,2-disulfonylhydrazines: a combination of experimental and DFT perspectives

Chemistry of Heterocyclic Compounds - In this work, new pyrazole derivatives were prepared by one-pot three-component reaction emloying symmetric and asymmetric 1,2-disulfonyl-hydrazines,...     

Aromatic poly(amide-ether)s containing naphthalene and methylene unites

1,5-Naphthene dioxy diacetic acid was synthesized from the reaction of 1,5-naphthalene diol and chloroacetic acid. It was used then as a bi-functiona l monomer in polycondensation reaction with aromatic diamines in the presence of tripnenylphosphite to produce poly(amide-ether)s. All the obtained polymers were characterized by IR and elemental analysis; their solubility behaviour was evaluated in polar organic solvents as well as in concentrated H₂SO₄. The extent of thermal stability and phase transitions of poly(amide- ether)s were investigated by thermogravimetric analysis and differential scanning calorimetry respectively; while the morphology was estimated by X-ray powder diffraction patterns. Besides, the fu-fu stacking character of polymer chain interactions in the solid state was confirmed by absorption spectra of solid thin films.     

Density functional studies of influences of Ni triad metals and solvents on oxidative addition of MeI to [M(CH3)2(NH3)2] complexes and C-C reductive elimination from [M(CH3)3(NH3)2I] complexes

Three metal square planar complexes of the type [M(CH₃)₂(NH₃)₂] (M = Ni, Pd, Pt), with a systematic variation in the metals, are chosen to investigating their S_N2-type oxidative addition reactions with methyl iodide by using the B3LYP levels of theory. The oxidative addition was found to take place via a transition state with a nearly linear arrangement of the I-CH₃-M moiety. Solvation effects in these oxidative addition reactions were also investigated. Considering the nature of the metal centre and solvation effects, the following conclusions emerge: (i) addition of MeI is exothermic for all three metals, and Pt is predicted to react with a much lower barrier than either Pd or Ni. The results describe that the MeI addition would be expected to be more favourable with the complex bearing the third-row metal (platinum) as compared to the other triad metals, nickel or palladium, in which case a more strongly bound MeI adduct is formed with a lower activation barriers and the reaction being more exothermic; (ii) the reaction is very difficult to occur in low polar solvents, such as benzene, due to the high barrier which is induced by dissociation of iodide anion from methyl group, but the reaction easily occurs in polar solvents, such as acetonitrile; this is attributed to the ability of polar solvents to solvate and therefore stabilize the related polar intermediate ion pair. Ethane reductive elimination from the M(VI) complexes fac-[M(CH₃)₃(NH₃)₂I] were also studied, indicating that the Ni(IV) and Pd(IV) complexes are very prone to undergo the reductive elimination while the Pt(IV) analogous is less reactive towards the reductive elimination. The results indicate that in contrast to the Me-Me reductive elimination, the S_N2 oxidative addition reaction of MeI to M(II) is much less sensitive to the nature of the metal centre, suggesting that the nucleophilicity of M(II) in [M(CH₃)₂(NH₃)₂] does not change significantly as one moves from M = Ni to Pt.     

Photophysical and optoelectronic properties of a platinum(II) complex and its derivatives,designed as a highly efficient OLED emitter: A theoretical study

New platinum(II) complex with picolinate (pic) and 2-phenyl naphtothiazole (pntl) ligand as the guest material has been designed and its capability for OLED applications have been examined. Also, we have studied the effects of different substitutions (ie, electron-withdrawing and electron donating groups) on naphtothiazole moiety on optovoltaic characters. We have employed density functional theoretical (B3LYP/DFT) methods to reveal the photophysical and structure properties relationships with the typical host material. The valence MO energies, vertical and adiabatic triplet energy, reorganization energy, and triplet exciton generation fraction (χ _T) have been extensively studied to exploring high phosphorescence efficiency in OLEDs. It has been predicted that substituted systems are good candidates for OLED applications as well as their parent system.     

Dispersive Liquid‐Liquid Microextraction of Cu(II) Using a Novel Dioxime for Its Highly Sensitive Determination by Graphite Furnace Atomic Absorption Spectrometry

A dispersive liquid‐liquid microextraction (DLLME) technique was proposed for the enrichment and graphite furnace atomic absorption spectrometric (GFAAS) determination of Cu²⁺ in water samples. In this method a mixture of 480 μL acetone (disperser solvent) containing 26 μg S,S‐bis(2‐aminobenzyl)‐dithioglyoxime (BAT) ligand and 20 μL carbon tetrachloride (extraction solvent) was rapidly injected by a syringe into 5 mL aqueous sample containing copper ions (analyte). Thereby, a cloudy solution formed. After centrifugation, the fine droplets containing the extracted copper complex were sedimented at the bottom of the conical test tube. This phase was collected by a microsyring and after dilution by methanol, 20 μL of it was injected into the graphite tube of the instrument for analysis. Effects of some parameters on the extraction, such as extraction and disperser solvent type and volume, extraction time, salt concentration, pH and concentration of the chelating agent were optimized. The response surface method was used for optimization of the effective parameters on the extraction recovery. Under these conditions, an enrichment factor of 312 was obtained. The calibration graph was linear in the rage of 2–50 μ L⁻¹ Cu²⁺ with a detection limit of 0.03 μg L⁻¹ and a relative standard deviation (RSD) for five replicate measurements of 3.4% at 20 μg L⁻¹ Cu²⁺. The method was successfully applied to the determination of Cu²⁺ in some spring water samples.     

In situ monitoring of pH titration by Raman spectroscopy

Molecular speciation of organic compounds in solution is essential for the understanding of ionic complexation. The Raman technique was chosen because it allows the identification of compounds in different states, and it can give information about the molecular geometry from the analysis of the vibrational spectra. The effect of pH on organic compounds can give information about the ionisation of molecule species. In this study the ionisation steps of salicylic acid and paracetamol have been studied by means of potentiometry coupled with Raman spectroscopy at 30.0 °C in a solution of ionic strength 0.96 mol dm^?3 (KNO₃) and 0.04 mol dm^?3 (HNO₃). The protonation and deprotonation behaviour of the molecules were studied in different pH regions. The abundance of the three different species in the Raman spectra of aqueous salicylic acid have been identified satisfactorily, characterised, and determined by numeric treatment of the data using a multiwavelength curve-fitting program and confirmed with the observed spectral information.     

Synthesis and characterization of new polynuclear bis-5-oxy-1H-tetrazoles

Different bis-phenols reacted with cyanogen bromide in the presence of triethylamine as base to give the corresponding bis-cyanates which were treated with sodium azide in acetone as solvent to produce new bis(5-oxy-1H-tetrazole) derivatives. One more bis-tetrazole derivative was synthesized by reaction of 5-(4-aminophenoxy)-1H-tetrazole with adipoyl chloride. The prepared compounds were characterized by usual spectroscopic techniques. Published in Russian in Zhurnal Organicheskoi Khimii, 2009, Vol. 45, No. 1, pp. 156–159. The text was submitted by the authors in English.     

Analysis of nonlinear vibrations and stability of rotating asymmetrical nano-shafts incorporating surface energy effects

The objective of the present work is to investigate the nonlinear vibrations of the rotating asymmetrical nano-shafts by considering surface effect. In order to compute the surface stress tensor, the surface elasticity theory is used. The governing nonlinear equations of motion are obtained with the aid of variational approach. Bubnov–Galerkin is a very effective method for exploiting the reduced-order model of the equations of motion. The averaging method is employed to analyze the reduced-order model of the system. For this purpose, the well-known Van der Pol transformation in the complex form and angle-action transformation are utilized. The effect of surface stress on the forward and backward speeds, steady state responses of the system, fixed points, close orbits and stability of the solutions is examined. The preliminary results of the research show that the absolute values of forward and backward whirling speeds in the presence of surface effect with positive residual surface stress are higher than those of regarding the system without surface effect and in the presence of surface effect with negative residual surface stress. In addition, it is seen that the undamped rotating asymmetrical nano-shaft, for specified value of detuning parameter, in the absence or presence of surface effect has various number of stable and unstable periodic solutions. Besides, there is different number of separatrix (homoclinic orbit type). Furthermore, bifurcations, number of solutions and their stability for damped rotating asymmetrical nano-shaft are investigated. Also, the above results have been obtained for rotating symmetrical nano-shaft.     

Organic-salt-mediated highly regioselective N3-alkylation of 2-thiophenytoin via Michael reaction under solvent-free conditions

A regioselective N3-alkylation of 5,5-diphenyl-2-thiohydantoin (2-thiophenytoin) using a very efficient mild base K₂CO₃ and α,β-unsaturated esters in the presence of organic salt TBAB (tetrabutylammonium bromide) at room temperature has been reported (3b–3h). The selectivity of this reaction is excellent and products have been produced in good yields under solvent-free conditions. The increase of the reaction temperature to 70°C mostly disappeared this selectivity and afforded only the N1,N3-dialkylated derivatives of 2-thiophenytoin in good yields (4b–4g). We were unable to selectively N3-alkylate 2-thiophenytoin with ethyl acrylate at both room temperature and 70°C under the same conditions (4a). Dimethyl and diethyl fumarates cannot work as Michael acceptors and were hydrolyzed to fumaric acid under reaction conditions.