Numerical analysis of finite amplitude motion of waves and a moored floating body under severe storm conditions

The motion of a moored floating body under the action of wave forces, which is influenced by fluid forces, shape of the floating body and mooring forces, should be analysed as a complex coupled motion system. Especially under severe storm conditions or resonant motion of the floating body it is necessary to consider finite amplitude motions of the waves, the floating body and the mooring lines as well as non-linear interactions of these finite amplitude motions. The problem of a floating body has been studied on the basis of linear wave theory by many researchers. However, the finite amplitude motion under a correlated motion system has rarely been taken into account. This paper presents a numerical method for calculating the finite amplitude motion when a floating body is moored by non-linear mooring lines such as chains and cables under severe storm conditions.     

Solvent free synthesis of polyaniline-clay nanocomposites from mechanochemically intercalated anilinium fluoride

Nanocomposites consisting of conducting polyaniline and clay minerals were successfully synthesized from mechanochemically intercalated anilinium fluoride; the nanocomposites prepared by the mechanochemical intercalation method contained much more polyaniline in the clay layers than those prepared by a conventional solution method.     

Synthesis of glutamate by reductive amination of 2-oxoglutarate with the combination of hydrogenase and glutamate dehydrogenase

Glutamate synthesis by reductive amination of 2-oxoglutarate was performed by the combination of NADH regeneration system and glutamate dehydrogenase (GluDH). The conversion of 2-oxoglutamate to glutamate was 98% after 3 h, and the turnover number of NAD⁺was 17.     

Density functional theory investigation of Eu(III) complexes with beta-diketonates and phosphine oxides: model complexes of fluorescence compounds for ultraviolet LED devices

The density functional theory was employed to investigate Eu(III) complexes with three beta-diketonates and two phosphine oxides (complex M1: Eu(bdk)3(TPPO)2, complex M2: Eu(bdk)3(TMPO)2, and complex M3: Eu(bdk)3(TPPO)(TMPO)) deemed to be the model complexes of the fluorescence compounds for the ultraviolet LED devices we have recently developed. For each complex, two minimum energy points corresponding to two different optimized geometries (structures A and B) have been found, and the difference of the energy between two minimum energy points is found to be quite small (less than 1 kcal/mol). Vertical excitation energies and oscillator strengths for each complex at two optimized geometries have been obtained by the time-dependent density functional theory, and the character of the excited states has been investigated. For complex M3, the absorption edge is red-shifted, and the oscillator strengths are relatively large. The efficiency of intersystem crossing and energy transfer from the triplet excited state to the Eu(III) ion is considered by calculating DeltaE(ISC) (the energy difference between the first singlet excited state and the first triplet excited state) and DeltaE(ET) (the difference between the excitation energy of the complex for the first triplet excited state and the emission energy of the Eu(III) ion for 5D to 7F).     

Synthesis of alanine and leucine by reductive amination of 2-oxoic acid with combination of hydrogenase and dehydrogenase

Alanine synthesis by reductive amination of pyruvate was performed by the combination of NADH regeneration system and alanine dehydrogenase (AlaDH). The conversion of pyruvate to alanine was 99% after 1 h. Leucine synthesis was also carried out by the combination of NADH regeneration system and leucine dehydrogenase (LeuDH). The conversion of 4-methyl-2-oxovalerate to leucine was 60% after 1.5 h.     

Phase behaviour of the discotic mesogen 5,10,15,20-tetrakis (4-n-dodecylphenyl)porphyrin under pressure

The phase behaviour of the discotic mesogen 5,10,15,20-tetrakis(4-n -dodecylphenyl)porphyrin (C12TPP) was investigated under hydrostatic pressures up to 300MPa by high pressure DTA and wide angle X-ray diffraction methods. The typical enantiotropic phase transitions of C12TPP, low- to high-temperature crystal (Cr2-Cr1), Cr1-discotic lamellar phase (DL), and DL-isotropic liquid (I) are observed at pressures up to 10MPa. Application of hydrostatic pressure to the sample generates a pressure-induced crystal polymorph (Cr3) between the Cr2 and Cr1 phases, and the phase transitions Cr2-Cr3-Cr1-DL-I occur reversibly in the pressure region between 10 and 180MPa. On heating at higher pressures above 180MPa, the fourth crystal polymorph (Cr4) is formed between the Cr2 and Cr3 phases at lower temperatures, and at the same time the fifth crystal polymorph (Cr5) appears abruptly between the Cr1 and DL phases at high temperatures. The Cr2-Cr4-Cr3-C1-(Cr5)-DL-I transition processes were observed at 180 200MPa. Further increasing the pressure above 270MPa induces entirely different thermal behaviour: only two peaks for the pressure-induced transition between the sixth and fifth polymorphs (Cr6-Cr5) and the Cr5-I transitions are detected at low and high temperatures on heating, while both the DTA and WAXD experiments on cooling show the formation of the DL phase as a monotropic phase between the I and Cr5 phases, indicating the I DL Cr5 Cr6 process. The thermal behaviour was ambiguous and complex in the pressure region between 200 and 260MPa because the peaks for the intermediate crystal transitions were too small to detect with confidence. The two different sequences of the Cr2-Cr4-Cr3-Cr1-DL-I and Cr6-Cr5-(DL)-I processes seems to occur competitively. The T vs. P phase diagram of a sample cooled at 300MPa was studied to determine the triple point of the DL phase and to investigate the phase stability of the pressure-induced crystal polymorphs. The Cr6-Cr5-I transition process was observed on heating at 200 and 300MPa, while the Cr6-Cr5-DL-I process was detected at lower pressures below 100MPa. Since the Cr5-DL transition temperature changes linearly with a slope dT/dP 40 degrees C/100 MPa, while the DL-I transition temperature changes slightly (dT/dP 5.5 degrees C/100MPa), the DL phase forms a triangle in the T vs. P diagram. The triple point of the DL phase was found to be 240.8MPa and 168.8 C. The Cr6 polymorph reorganized to the stable Cr2 form under atmospheric pressure on annealing at room temperature overnight.     

Induction in linear logic

Linear logic, introduced by Girardet al., has a great power of expression, but no method for induction. This paper proposes a method of induction using knowledge represented by linear logical formulas. In linear logic, the number of propositions is controlled by logical operators. When a background theory and a hypothesis prove an example, the number of propositions on each side must be equivalent.     

Photon number squeezing of ultrabroadband laser pulses generated by microstructure fibers

To the best of our knowledge, we demonstrate for the first time the generation of photon number squeezing by spectral filtering for ultrabroadband light generated by microstructure fibers at 800 nm. A maximum squeezing of 4.6 dB is observed, corresponding to 10.3 dB after correcting for detection losses. We numerically analyzed the quantum dynamics of ultrashort laser pulse propagation through optical fibers by solving a nonlinear quantum Schr?dinger equation that included Raman scattering, especially for the quantum correlation of photon number fluctuation among frequency modes in broadband pulses.     

Human hand moves proactively to the external stimulus: an evolutional strategy for minimizing transient error

We investigated particularly the proactive nature of the visual-motor system by steady and transient experiments of a hand-tracking task, and confirmed that the hand motion precedes on the average the target motion in steady runs within a finite frequency range of the sinusoidal target motion. The question why and how much the hand motion should precede was answered by frequency-jump experiments. The results implied that the positive phase shift of the hand motion represents the proactive nature of the visual-motor control system which is adaptationally developed for each person to minimize the transient error of the hand motion when the target motion changes unexpectedly.     

Orientation Control of Photo‐Immobilized Antibodies on the Surface of Azobenzene‐Containing Polymers by the Introduction of Functional Groups

In our photo‐induced immobilization technique for an antibody (IgG) using azopolymers, the introduction of COOH and NMe₂ into the azopolymers, which can introduce surface charges, strongly affected the immobilization properties such as the efficiency of immobilization and the activity of the immobilized IgG (i.e., the orientation of the immobilized IgG). The introduction of COOH promoted a more active orientation of the immobilized IgG. The orientation was determined during the adsorption process onto the azopolymer surface in solution before photo‐immobilization, and was maintained during the photo‐immobilization. The surface charge of the azopolymer appears to be an important factor for IgG orientation, which involves electrostatic interactions between its Fab and the azopolymer surface.