Investigation of Raman,FT-IR,EPR spectra and antimicrobial activity of 2-(5-H/Me/Cl-1<Emphasis Type="BoldItalic">H</Emphasis>-benzimidazol-2-yl)-phenol ligands and their Fe(NO<Subscript>3</Subscript>)<Subscript>3</Subscript> complexes

2-(5-H/Me/Cl-1H-benzimidazol-2-yl)-phenol ligands form 1:1 electrolytes, 5-coordinate monometallic complexes with iron(III) nitrate. The geometry of the [Fe(L)(OH)(H₂O)₂](NO₃) complexes was derived from theoretical calculation in DGauss/DFT level (DZVP basis set) on CACHE. In all of the complexes the ligands are bidentate, via one imine nitrogen atom and phenolate oxygen atom. The coordination is completed with a hydroxide ion, and two water molecules, adopting a distorted square pyramidal geometry. The structures of the compounds were confirmed on the basis of elemental analysis, molar conductivity, magnetic moment, FT-Raman, FT-IR (mid-IR, far-IR), EPR and u.v.–vis. The antimicrobial activities of the free ligands, their hydrochloride salts, and the complexes were evaluated using the disk diffusion method in dimethyl sulfoxide (DMSO) as well as the minimal inhibitory concentration (MIC) dilution method, against nine bacteria and the results are compared with several known antibiotic agents. Antifungal activities were reported for Candida albicans, Kluyveromyces fragilis, Rhodotorula rubra, Debaryomyces hansenii, Hanseniaspora guilliermondii, and the results were referenced against nystatin, ketaconazole, and clotrimazole antifungal agents. In most cases, the compounds tested showed broad-spectrum (Gram⁺ & Gram⁻ bacteria) activities that were either more active or as potent as the references.     

Negative capacitance of ZnGa2Se4/Si nano-heterojunction diode

The negative capacitance (NC) behavior in p-ZnGa₂Se₄/n-Si nano-crystalline HJD was characterized by admittance-voltage method. The C–V, G–V and R _s –V for the studied diode were analysed in the frequency range of 1–5 MHz and in the temperature range of 303–423 K. The capacitance and conductance plots were interpreted in terms of interface states and series resistance. The C–V and G/ω–V plots exhibit a pounced peak due to the interface states and the series resistance effects. The negative capacitance behavior in the studied diode can be explained in terms of the transient currents.     

A new aluminum iron oxide Schottky photodiode designed via sol–gel coating method

A novel aluminum iron oxide(Al/AlFe2O4/p-Si) Schottky photodiode was successfully fabricated via the sol–gel coating process. The microstructure of the spinel ferrite(AlFe2O4) was examined by atomic force microscopy. The current–voltage characteristics of the fabricated photodiode were studied under dark and different illumination conditions at room temperature. By using the thermionic emission theory, the forward bias I–V characteristics of the photodiode are analyzed to determine the main electrical parameters such as the ideality factor(n) and barrier height(ΦB0) of the photodiode. The values of n and ΦB0 for all conditions are found to be about 7.00 and 0.76 eV, respectively. In addition,the values of series resistance(Rs) are determined using Cheung's method and Ohm's law. The values of Rs and shunt resistance(Rsh) are decreased with the increase of illumination intensity. These new spinel ferrites will open a new avenue to other spinel structure materials for optoelectronic devices in the near future.     

Synthesis,Antimicrobial Activity and Semi-conducting Properties of Novel 2-(4-Chloro-1-Naphtyloxy)-2-Oxoethyl Methacrylate with 2-(Diethylamino)Ethyl Methacrylate Copolymers

The free-radical initiated copolymerization of 2-(4-chloro-1-naphtyloxy)-2-oxoethyl methacrylate (ClNOEMA) with 2-(diethylamino) ethyl methacrylate (DEAEMA) was carried out in 1,4-dioxane solution at 70 ± 1°C using 2,2′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios (ranging from 0.15 to 0.85) in the feed. The copolymer composition obtained by elemental analysis led to the determination of reactivity ratios employing Fineman-Ross (F-R) and Kelen-Tüdös (KT) linearization methods. These parameters were also estimated using a non-linear computational fitting procedure, known as reactivity ratios error in variable model (RREVM). The prepared homo and copolymers were tested for their antimicrobial activity against bacteria and yeast. These copolymers have been converted into novel salts by reaction with the iodemethane (CH₃I). The copolymers and the corresponding salts have been characterized fully by a range of spectroscopic analysis techniques. The electrical conductivity dependence of temperature of the polymers were measured and the polymers exhibit the semi-conducting behavior, confirming that the electrical conductivity increases with increasing temperature. The poly(CINOEMA-co-DEAEMA) polymer doped by CH₃I for 15 min shows the highest conductivity. The optical band gap, activation energy and room temperature conductivity values of these polymers were obtained. These electronic parameters suggest that the poly(CINOEMA-co-DEAEMA)s doped by CH₃I for 15 min is an organic semiconductor with the thermally activated conduction mechanism.     

Humidity sensing characteristics of Sn doped Zinc oxide based quartz crystal microbalance sensors

The electrical, optical and humidity sensor properties of nanostructured ZnO samples were investigated. The structural properties of Sn doped ZnO samples were characterized by X-ray diffraction and atomic force microscopy. It was found that the all samples have a hexagonal crystal structure. The electrical conductivity of the samples indicates that undoped and Sn doped ZnO samples exhibit the semiconducting behavior. The optical absorption method was used to determine the optical band gaps of the samples. The optical band gap and activation energy values of the ZnO samples were changed with Sn doping. The ZnO based on quartz crystal microbalance humidity sensors were prepared and sensing properties of the sensors were changed with Sn doping. The response time required to reach 70 % is about 13–16 s, while the recovery time from 70 to 30 % RH is about 13–15 s. The fast response of the sensors is due to easy diffusion of water molecules between ZnO nanopowders. The prepared sensors have a high reproducibility and sensitivity for humidity sensing applications.     

Influence of Mn incorporation on the structural and optical properties of sol gel derived ZnO film

Undoped and manganese doped ZnO (ZnO:Mn) films were prepared by sol gel method using spin coating technique. The effect of Mn incorporation on the structural and optical properties of the ZnO film has been investigated. The crystalline structure and orientation of the films have been investigated by using their X-ray diffraction spectra. The films exhibit a polycrystalline structure. Mn incorporation led to substantial changes in the structural characteristics of the ZnO film. The scanning electron microscopy (SEM) images of the films showed that the surface morphology of the ZnO film was affected by the Mn incorporation. The transparency of the ZnO film decreased with the Mn incorporation. The optical band gap and Urbach energy values of the ZnO and ZnO:Mn films were found to be 3.22, 3.19 eV and 0.10, 0.23 eV, respectively. The optical constants of these films, such as refractive index, extinction coefficient and optical dielectric constants were determined using transmittance and reflectance spectra. The refractive index dispersion curve of the films obeys the single oscillator model with dispersion parameters. The oscillator energy, E _o , and dispersion energy, E _d, of the films were determined 5.30 and 16.26 eV for ZnO film and 5.80 and 12.14 eV for ZnO:Mn film, respectively.     

Molecular structure and vibrational spectra of [2-Oxo-2-(4-acetyl) phenyl amino] ethylene methacrylate by density functional theory and ab initio Hartree–Fock calculations

The molecular geometry and vibrational frequencies of the [2-Oxo-2-(4-acetyl) phenyl amino] ethylene methacrylate (APEMA) were examined theoretically using the Hartree–Fock and Density function method (B3LYP) with 6-31G(d) basis set. The calculated geometrical parameters of the investigated molecule were compared with experimental data. Both the calculated structural parameters and vibrational frequencies are in good agreement with the available experimental data.     

Synthesis, FT-Raman, FT-IR, NMR spectroscopic characterization and antimicrobial activity of new mixed aza-oxo-thia macrocyclic compounds

Series of new mixed aza-oxo-thia macrocyclic ligands {2,6,12,16-tetraaza-1,7,11,17-tetraoxo-9,19-dithia-[(4′-methyl-5′,4,3′)(14′-methyl-15′,14,13′)]ditriazine}cyclocosane (L ₁ ); {2,6,13,17-teraaza-1,7,12,18-tetraoxo-9,10,20,21-tetrathia-[(4′-methyl-5′,4,3′)(15′-methyl-14′,16′,15)]di-triazine}cyclodocosane (L ₂ ); {2,6,14,18-tetraaza-1,7,13,19-tetraoxo-10,22-dithia-[(4′-methyl-5′,3′,4)(16′-methyl-15′,17′,16)]ditriazine}cyclotetracosane (L ₃ ) and {2,6,15,19-tetraaza-1,7,14,12-tetraoxo-10,11,23,24-tetrathia-[(4′-methyl-5′,4,3′)(17′-methyl-8′,17,16′)]ditriazine}cyclohexa-cosane (L ₄ ) were synthesized. The structural features of the compounds have been studied by elemental analyses, Mass, FT-Raman, FT-IR, ¹H and ¹³C NMR spectroscopy. The antimicrobial activities of the ligands were evaluated using disk diffusion method in dimethyl sulfoxide as well as the minimal inhibitory concentration (MIC) dilution method, against 9 bacteria. The obtained results from disk diffusion method were assessed in side-by-side comparison with those of Penicillin-g, Ampicillin, Cefotaxime, Vancomycin, Oflaxacin, and Tetracyclin, well-known antibacterial agents. The results from dilution procedure were compared with Gentamycin as antibacterial and Nystatin as antifungal. The antifungal activities are reported on five yeast cultures namely Candida albicans, Kluyveromyces fragilis, Rhodotorula rubra, Debaryomyces hansenii, and Hanseniaspora guilliermondii, and the results are referenced with Nystatin, Ketaconazole, and Clotrimazole, commercial antifungal agents. In most cases, the compounds show strong antifungal activity in the comparison tests.