Apatite type lanthanum silicate and composite anode half cells

Apatite type rare earth silicates are being extensively studied as electrolyte material for intermediate temperature solid oxide fuel cells (SOFC). In this paper we presents results on synthesis of Al and/or Fe-doped ATLS, the design of compatible anode materials, thermal expansion properties and co-sintering of half-cells from expansion matched materials using the advanced pulsed electric current sintering (PECS) technique. The issues related to the co-sintering of half cells have been addressed successfully by the combined use of nano powders and PECS.     

Synthesis and characterization of doped apatite-type lanthanum silicates for SOFC applications

A series of iron- and/or aluminium-doped apatite-type lanthanum silicates (ATLS) La_9.83Si_{6 ‐ x ‐ y}Al_xFe_yO_26 ± δ (x = 0, 0.25, 0.75, and 1.5, y = 0, 0.25, 0.75, and 1.5) were synthesized using the mechanochemical activation (MA), solid state reaction (SSR), Pechini (Pe) and sol-gel (SG) methods. The total conductivity of the prepared materials was measured under air in the temperature range 600-850 °C using 4-probe AC impedance spectroscopy. Its dependence on composition, synthesis method, sintering conditions and powder particle size was investigated. It was found that for electrolytes of the same composition, those prepared via mechanochemical activation exhibited the highest total specific conductivity, which was improved with increasing Al- and decreasing Fe-content. The highest conductivity value at 700 °C, equal to 2.04 × 10^− 2 S cm^− 1, was observed for the La_9.83Si₅Al_0.75Fe_0.25O_26 ± δ electrolyte. La_9.83Si_4.5Fe_1.5O_26 ± δ electrolyte samples synthesized using the Pechini method exhibited higher conductivity when sintered conventionally than when spark-plasma sintering (SPS) was used.     

Growth mechanism and optoelectronic properties of nanocrystalline In2O3 films prepared by chemical spray pyrolysis of metal-organic precursor

Thin films of indium oxide, In₂O₃, were deposited by chemical spray pyrolysis technique, using aqueous alcoholic solutions of indium acetylacetonate (In-acac) precursor, on glass substrates kept at temperatures between 300 and 500 °C. The structural, optical, and electrical properties have been investigated as a function of deposition temperature, precursor concentration, carrier gas pressure, and substrate-to-nozzle distance. X-ray diffraction studies showed that the formation of nanocrystalline In₂O₃ films is preferentially oriented along (2 2 2) plane. The surface morphological modifications with substrate temperature were observed using scanning electron and atomic force microscopic studies. Optical transmittance behavior of the films in the visible and IR region was strongly affected by the deposition parameters. The optical band gap values observed are between 3.53 and 3.68 eV. The long wavelength limit of refractive index is 1.83. The Hall mobility is found to vary from 23 to 37 cm²/V s and carrier density is found nearly constant at about 10²⁰ cm⁻³.     

Influence of metal organic and inorganic precursors on spray pyrolyzed ceramic MgO (2 0 0) thin films for epitaxial over layers

The MgO (2 0 0) surface is widely used as a substrate for epitaxial growth of superconducting and ferro-electric films. Highly oriented, single crystalline, extremely flat and transparent MgO films have been successfully deposited on quartz substrates by the chemical spray pyrolysis technique using economically viable metal organic and inorganic precursors under optimized conditions at the substrate temperature of 600 °C. Thermal analysis (TGA/DTA) in the temperature range 30-600 °C with the heating rate of 10 °C/min revealed the decomposition behavior of the precursors and confirmed the suitable substrate temperature range for film processing. The heat of reaction, ΔH due to decomposition of metal organic precursor contributed additional heat energy to the substrate for better crystallization. The intensity of the (2 0 0) peak in X-ray diffraction (XRD) measurements and the smooth surface profiles revealed the dependency of precursor on film formation. The compositional purity and the metal-oxide bond formation were tested for all the films. UV-Vis-NIR optical absorption in the 200-1500 nm range revealed an optical transmittance above 80% and the absorption edge at about 238 nm corresponding to an optical band gap E_g = 5.25 eV. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) micrographs of MgO films confirmed better crystallinity with larger grain size (0.85 μm) and reduced surface roughness (26 nm), respectively.     

Magnesium indium oxide (MgIn2O4) spinel thin films: chemical spray pyrolysis (CSP) growth and materials characterizations

MgIn(2)O(4), which has an inverse spinel structure, has been adopted as the transparent material in optoelectronic device fabrication due to its high optical transparency and electrical conductivity. Such a technologically important material was prepared by the spray pyrolysis technique. Precursors prepared for the cationic ratio Mg/In=0.5 were thermally sprayed onto glass substrates at 400 and 450 degrees C. We report herein the preparation and characterization of the films by X-ray diffraction (XRD), energy-dispersive absorption X-ray spectroscopy (EDAX), and atomic force microscopy (AFM). The XRD results showed the single phase formation of the material that revealed the presence of Mg(2+) and In(3+) in the inverse spinel-related structure. The FTIR and EDAX results further confirmed that the nanocrystalline films were mainly composed of magnesium, indium, and oxygen, in agreement with XRD analysis. We surmised from the AFM micrographs that the atoms have enough diffusion activation energy to occupy the correct site in the crystal lattice. For the 423-nm-thick magnesium indium oxide films grown at 400 degrees C, the electrical conductivity was 5.63x10(-6) Scm(-1) and the average optical transmittance was 63% in the visible range (400-700 nm). Similar MgIn(2)O(4) films deposited at 450 degrees C have a conductivity value of 1.5x10(-5) Scm(-1) and an average transmittance of 75%. Hall coefficient observations showed n-type electrical conductivity and high electron carrier concentration of 2.7x10(19) cm(-3).     

Numerical study of reacting flow characteristics of a 2D twin cavity trapped vortex combustor

In the present work, reacting flow characteristics of a 2D trapped vortex combustor (TVC) have been investigated numerically. Turbulent flow prevailing in the combustor is modelled using the two equation shear stress transport (SST) k-ω model and the turbulence–chemistry interactions are modelled using the eddy dissipation concept (EDC) model. Validation study reveals that the data generated by numerical model for reacting flow cases matches reasonably well with the experimental data. Simulation results indicate that for a particular operating condition, the flow structure within the cavity for reacting flow cases is significantly different from non-reacting flow cases. Besides this, under reacting flow condition, the vortex core location shifts with variation in operating condition. This study also reveals significant differences in the velocity gradient at the shear layer between reacting and non-reacting flow conditions. Furthermore, the turbulent kinetic energy at the cavity zone increases for the reacting flow condition, which is attributed to the volume expansion associated with the combustion processes. Also, temperature contours at locations downstream of the trailing edge indicate that both cavity flames are merged together for higher primary air velocity cases, and this is essential for efficient performance of TVC.     

Crystal growth,optical and thermal studies of nonlinear optical γ-glycine single crystal grown from lithium nitrate

Single crystals of the nonlinear material γ-glycine have been grown in the presence of lithium nitrate by slow-evaporation method. Structural characterization of the grown crystals was carried out by powder and single crystal X-ray diffraction (XRD) methods and it is observed that the samples crystallize in hexagonal system with non-centrosymmetric space groups. The modes of vibrations of different molecular groups present in glycine have been identified by spectral analyses. UV–visible transmittance study was performed to analyze optical transparency of γ-glycine crystals and found that the crystal was transparent in the entire visible-NIR region. Second harmonic generation (SHG) conversion efficiency has been estimated as 62 mV and the output power by the crystal was 1.72 times that of potassium dihydrogen phosphate (KDP) crystal. The thermal stability and decomposition of the sample have been studied by thermal analysis and it is observed that the γ-glycine crystal have good thermal stability.     

Solution growth of new ferroelectric glycine phosphite unidirectional single crystals at room temperature

Glycine phosphite [NH₃CH₂COOH₃PO₃], abbreviated as GPI is the second hydrogen bonded ferroelectric crystal combination of phosphorous acid and amino acid following βnine phosphite crystals abbreviated as BPI. Sankaranarayanan and Ramasamy‐Technique was adopted to prepare the ferroelectric glycine phosphite unidirectional single crystal. The growth orientation was imposed by the pre‐grown 〈010〉 seed. As water was the solvent, transparent, colourless crystal with cylindrical shaped ingot of sized 20mm‐diameter was grown. Powder X‐ray diffraction, HRXRD, FTIR, dielectric and mechanical studies were carried out. The results are discussed in detail. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

XRD and XPS characterization of mixed valence Mn3O4 hausmannite thin films prepared by chemical spray pyrolysis technique

Spray pyrolysis technique has been employed successfully for the synthesis of single phase mixed valence spinel hausmannite (Mn₃O₄) thin films using alcoholic start solution of manganese acetate (Mn(CH₃COO)₂·4H₂O) on pyrex glass substrates at atmospheric pressure using air as a carrier gas. Thermal decomposition of the precursor in the temperature range 320-490 °C led to the formation of Mn₃O₄ phase as revealed from the thermogravimetry analysis. Prepared samples are characterized by X-ray diffraction that shows spinel structure with space group I4₁/amd. Pure and well crystallized specimen is subjected to X-ray photoelectron spectroscopy for the surface chemistry investigation of these systems at a molecular level. Surface Mn/O ratio is compared to the bulk composition of the sample. Atomic force micrographs revealed that the morphology and the surface grains of the films largely influenced by the substrate temperature.     

Structural, dielectric and piezoelectric properties of nonlinear optical γ-glycine single crystals

Gamma glycine was synthesized and the single crystals were grown by the slow evaporation method in the presence of lithium nitrate. Structure and crystalline nature of the grown γ-glycine crystal was confirmed by X-ray diffraction technique. It was found to crystallize in the trigonal system with space group P3₁. The chemical composition was determined by NMR. Fourier transform infrared studies revealed the functional groups present in the grown crystal and UV-vis-NIR spectra revealed the transmission properties of the crystal specimen. Surface morphology of the grown crystal was studied by scanning electron microscopy (SEM) and elemental composition was confirmed by energy-dispersive spectrometry (EDS). The second-order nonlinear optical property of the material was investigated by Kurtz powder technique and the relative second harmonic efficiency of γ-glycine was estimated to be higher than that of KDP. The dielectric measurement was carried out as a function of frequencies at room temperature and the results were discussed. The samples have shown piezoelectric behavior with a fairly good piezoelectric charge coefficient (d₃₃) of 7.37 pC/N. Photoluminescence studies showed emission peak around 350 nm. Thermo gravimetric and differential thermal analyses were employed to understand the thermal and physio-chemical stability of the synthesized compound.