Bioadhesion to solids: contact angle hysteresis effect

It was recently reported that the ease of removal of sporelings of green seaweed Ulva under shear stress from the polymer surfaces was found to be linearly and positively correlated with contact angle and wetting hysteresis, i.e., the higher the hysteresis, the greater the removal. Motivated by this report, we examined the relationship between the bioadhesion of blood platelets and proteins with contact angle hysteresis of solid substrates using the data of published papers. It was determined that there is a linear and positive relationship between the contact angle hysteresis and bioadhesion of both blood platelets and γ-globulin protein contacting the solid substrates, i.e., the higher the hysteresis, the greater the bioadhesion. The reasons are discussed and it is proposed that testing the effect of CAH on the adhesion strengths of biomaterials on surfaces is useful in order to gain a better insight on the bioadhesion mechanism.     

Binary and Ternary Copper(II) Complexes with NIPAAm/IA Copolymers and Aminoacids: Interpretation of UV‐Visible Spectra and Cyclic Voltammograms

The complex formations of homopolymers and copolymers of poly(N‐isopropyl acrylamide) (PNIPAAm), polyacrylamide (PAAm) and poly(itaconic acid) (PIA) with Cu(II) ions in aqueous solutions were studied by using UV‐visible spectra in the region of 200–1100 nm and cyclic voltammograms between ?0.800 V and 0.600 V. According to the optical and electrochemical spectra of the polymer‐ and copolymer‐Cu(II) complexes and their ternary complexes with alanine, i.e., absorptions and the shifts in the wavelength of the maximum absorptions, currents and potentials of the peaks in the pH range of 3–12, the intensities of anodic and cathodic peak currents of polymers containing IA groups decrease with increasing pH and they show maximum absorptions at lower wavelengths than do the homopolymers used in this work. The peak point of the visible band shifts from 800 to 650 nm, with increasing pH, while the intensity of the third anodic peak observed after pH=4 increases in the case of both Ala‐Cu(II) and its ternary solution with P(NIPAAm‐co‐IA, 9.8 mol%). Both the pH‐dependent shifts of maximum absorptions and the appearence of the third anodic peaks as the pH raised were interpreted as a presence of tetracoordinated Cu(II) complexes in the solution and on the electrode surface, involving combined carboxyl, amide and amine interaction.     

Two new zinc(II) and mercury(II) complexes based on N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide): synthesis,crystal structures and antibacterial activities

Reaction of N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide), C₂₀H₁₈F₂N₄O₂, ( L^F ), with zinc chloride and mercury(II) chloride produced different types and shapes of neutral coordination complexes, namely, dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ²N,O]zinc(II), [ZnCl₂(C₂₀H₁₈F₂N₄O₂)], ( 1 ), and dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ⁴O,N,N′,O′]mercury(II), [HgCl₂(C₂₀H₁₈F₂N₄O₂)], ( 2 ). The organic ligand and its metal complexes are characterized using various techniques: IR, UV–Vis and nuclear magnetic resonance (NMR) spectroscopies, in addition to powder X‐ray diffraction (PXRD), single‐crystal X‐ray crystallography and microelemental analysis. Depending upon the data from these analyses and measurements, a typical tetrahedral geometry was confirmed for zinc complex ( 1 ), in which the Zn^II atom is located outside the bis(benzhydrazone) core. The Hg^II atom in ( 2 ) is found within the core and has a common octahedral structure. The in vitro antibacterial activities of the prepared compounds were evaluated against two different bacterial strains, i.e. gram positive Bacillus subtilis and gram negative Pseudomonas aeruginosa bacteria. The prepared compounds exhibited differentiated growth‐inhibitory activities against these two bacterial strains based on the difference in their lipophilic nature and structural features.     

Anchor Effect on Pedal Motion Observed in Crystal Phase of an Azobenzene Derivative

Abstract  

Some molecules having a molecular skeleton similar to that of stilbenes and azobenzenes show orientational disorder in the crystals due to pedal motion. Heretofore, the orientational disorder through pedal motion has been observed for the compounds containing only two aromatic rings in the absence of bulky substituent groups. Here we report that the pedal motion can be detected even in the presence of a bulky substituent group to which orientational disorder becomes invisible as a result of anchor effect arising from phenoxyphtalonitrile group. X-ray crystallographic analysis of the compound, C₂₃H₁₈N₄O, reveals the existence of partially overlapped two pedal conformers. The compound crystallizes in the monoclinic space group P2₁/c with a = 12.9429(11) Å, b = 8.5075(5) Å, c = 21.063(2) Å and β = 123.155(6)°. Major pedal conformer is stabilized by weak C–H···O type hydrogen bond and C–H···π type edge-to-face interactions in solid state. Quantum chemical calculations at B3LYP/6-311G+(d,p) level suggest that the stabilization of the compound decreases with increasing deviation from the planar geometry of trans-azobenzene fragment.     

Effects of TEMED and EDTA on the structural and mechanical properties of NIPAAm/Na+MMT composite hydrogels

N‐isopropyl acrylamide (NIPAAm) hydrogels are known as thermosensitive crosslinked polymer networks. In this work, the network parameters of their composites, i.e., NIPAAm/sodium montmorillonite (NIPAAm/Na⁺MMT) hydrogels synthesized by free radical solution polymerization in the presence of two different types of accelerator (tetramethyl ethylenediamine (TEMED) and ethylenediamine tetraacetic acid (EDTA)) and initiator (potassium persulphate (K₂S₂O₈) and cerium ammonium nitrate ((NH₄)₂Ce(NO₃)₆), Ce(IV)) using five different clay content (in the range of 1.0–5.0 wt % of total monomer concentration) at 25 °C were presented and discussed. FTIR spectra, XRD patterns, SEM photographs, and network parameters of the samples indicated that the presence of COOH groups on EDTA molecules was resulted in the formation of exfoliated structures and the activity of EDTA/KPS redox pair was higher than those of TEMED/KPS and EDTA/Ce (IV) pairs. The compression moduli (G) of the hydrogels initiated with EDTA/Ce(IV) redox pair showed smooth and continual changings with increase in Na⁺MMT content (for swelling equilibrium at 25 °C) on the contrary of EDTA/KPS and TEMED/KPS pairs. It might be related to low initiator efficiency of cerium ammonium nitrate than KPS molecules, having higher effective crosslinking density with increasing clay content. On the other hand, the G moduli of NIPAAm/Na⁺MMT hydrogels (above their phase transition temperature) initiated with TEMED/KPS redox pair were higher than the others because of the more hydrophobic nature of TEMED molecules. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1256–1264, 2010     

Structure of 4,4′-butane-(1,4,7-three-p-tolylsulphonyl-1,4,7-three amine) diphthalonitrile

Abstract

The crystal structure of the title compound, C₄₁ H₃₅ N₇ O₆ S₃ was determined as monoclinic by single crystal X-Ray diffraction technique. The molecular structure was identified by IR, ¹H-NMR, ¹³C-NMR and elemental analysis. The crystal parameters of this compound are as follows: monoclinic P 2 1/n, a = 12.694(2) Å, b = 26.204(2) Å, c = 13.005(2) Å, β = 102.95(2)°, V = 4216.02(1) Å.³, Z = 4, Dx = 1.289 g/cm³, F(000) = 1704, λ (MoKα) = 0.71070 Å, μ = 0.2 mm^?1. The structure was solved by SHELXS-97 and refined by SHELXL-97. R = 0.06 for 3178 observed reflections with I > 2σ (I).     

Investigation of 2-aminoethanethiol as corrosion inhibitor for steel using response surface methodology (RSM)

The inhibition efficiency of 2-aminoethanethiol (2-AEE) has been investigated against steel corrosion in 0.1 M HCl solution. The effect of temperature, pH, and concentration were studied with the help of potentiodynamic measurement, electrochemical impedance spectroscopy, scanning electron microscopy, and atomic absorption spectroscopy techniques. The potential of zero charge (E_pzc) studies showed that the adsorption occurs via ?SH group; the metal surface is positively charged in corrosive test solution. The adsorptive interaction is evaluated, and best correlation was obtained with Langmuir isotherm. 2-AEE was shown to have significant inhibition efficiency against steel corrosion. The response surface methodology was employed to explain the relation between pH, inhibitor concentration, and the efficiency. The regression analysis was realized for development of an equation between independent variables and the output. The success of fitting model was tested with basic statistical arguments, residual and variance analysis, T and F tests, and R ² value. The statistical evaluations showed that the obtained polynomial equation can be successfully used for optimization of applications involving the use of 2-AEE as inhibitor.     

Crystal structure and computational studies of (E)-1-(benzo[b]thiophen-3-yl)-N-(4-ethoxyphenyl)methanimine

Crystallography Reports - The title compound, C17H15NOS, crystallizes in the orthorhombic sp. gr. Pca21. Two molecules in the asymmetric unit have similar structure. Crystal structure contains weak...     

Synthesis,characterization and electrochemical properties of novel metal free and zinc(II) phthalocyanines of ball and clamshell types

The phthalodinitrile derivative 1 was prepared by the reaction of 4-nitrophthalonitrile and 1,3-dimethoxy-4-tert-butylcalix[4]arene in dry dimethylsulfoxide as the solvent, in the presence of the base K₂CO₃, by nucleophilic substitution of an activated nitro group in an aromatic ring. The tetramerization of compound 1 gave a binuclear zinc(II) phthalocyanine and a metal-free phthalocyanine of the ball type, 2 and 3, respectively. Its condensation with 4,5-bis(hexylthio)phthalonitrile results in a binuclear phthalocyanine of the clamshell type, 4. The newly synthesized compounds were characterized by elemental analysis, UV–Vis, IR, MS and ¹H NMR spectra. The electronic spectra exhibit an intense π → π^∗ transition with characteristic Q and B bands of the phthalocyanine core. The electrochemical properties of 2–4 were examined by cyclic voltammetry in non-aqueous media. The voltammetric results showed that while there is no considerable interaction between the two phthalocyanine rings in 4, the splitting of a molecular orbital occurs as a result of the strong interaction between the phthalocyanine rings in 2 and 3.