Permeability of N2, Ar,He, O2, and CO2 through as‐extruded amorphous and biaxially oriented polyester films: Dependence on chain mobility

For as‐extruded amorphous and biaxially orientated polyester films based on poly(ethylene terephthalate), poly(ethylene naphthalate), and copolymers containing poly(ethylene terephthalate) and poly(ethylene naphthalate) moieties, permeability, diffusion, and solubility coefficients are interpreted in terms of chain mobility. The influence of polymer morphology is determined by comparison of the data for as‐extruded amorphous sheets and materials produced with different biaxial draw ratios. The crystallinities of the samples were assessed using differential scanning calorimetry and density measurements. Changes in mobility at a molecular level were investigated using dielectric spectroscopy and dynamic mechanical thermal analysis. The study, in conjunction with our earlier work, leads to the conclusion that the key to understanding differences in gas transport is the difference in local chain motions rather than in free volume. This was illustrated by the permeability results for He, Ar, N₂, and O₂ in the range of polyesters. However, the permeability of CO₂ was found to require alternative explanations because of polymer–penetrant interactions. For biaxially oriented samples, the differences in diffusivity are not only due to differences in local chain motions, but also additional constraints resulting from the increased crystallinity and chain rigidity—which also act to hinder segmental mobility. The effectiveness of the reduction in permeability in the biaxially oriented films is consequently determined by the ability of the polymer chains to effectively align and form crystalline structures. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2916–2929, 2004     

Estimating Sampling Errors in REA Survey: A Model Approach for the Synthetic Presentation of Results for Main Variables Involved in Economic Analysis

A new sample business survey for agriculture, the REA survey, and a project of integration with the FADN network (RICA in Italy) have significantly changed the production of statistical information nowadays available with reference to the agricultural sector. On the basis of this relevant information, new economic analyses are being developed on farms’ performance, agricultural households’ income and the Common Agricultural Policy (CAP). In this paper the authors estimate the relationship between the levels of variables of interest and their sampling errors using models in order to improve the accessibility of the information on estimates accuracy to the final users (agricultural analysts, policy makers). The paper is the result of a joint research of the three authors. Sections 1–3 and 6 by Pizzoli, Sects. 4 and 5 by Rondinelli, Sect. 7 by Filiberti, conclusions joint to the three authors.     

Tunable narrow-band infrared emitters from hexagonal lattices

In this work, we present both the theoretical basis as well as supporting experimental measurements for development of a novel mid-infrared thermally stimulated narrow band emitter with a spectral bandwidth of less than 10%. To achieve this, we utilize a metallized-surface 2D photonic crystal of air voids in a silicon background with hexagonal structure symmetry. Our results are based on the generation of discrete surface plasmon (SP) modes in the thin metallized layer residing on the top surface. This yields a series of adequately spaced discrete peaks in the reflection spectrum, dominated by a single sharp feature corresponding to the lowest plasmon order, in an otherwise uniform highly reflective spectrum (>90%) over most of the IR spectrum. This, in turn, gives rise to a sharp absorption feature with a correspondingly narrow thermal emission peak in the emission spectrum. Transfer matrix calculations simulate well both the position and strengths of the absorption peaks. By altering the period of the surface photonic lattice, the SP peak and emissive band can be tuned to the desired wavelength. These devices promise a new class of tunable infrared emitters with high power in a narrow spectral bandwidth. Such narrow band sources are critical to achieving high efficiency gas sensors.     

Combined confocal and magnetic resonance microscopy

Confocal fluorescence optical microscopy and magnetic resonance microscopy are each used to study live cells in a minimally invasive way. Both techniques provide complementary information. Therefore, by examining cells simultaneously with both methodologies, more detailed information is obtained than is possible with each microscope individually. In this paper two configurations of a combined confocal and magnetic resonance microscope are described. The first configuration is capable of studying large single cells or three-dimensional cell agglomerates, whereas the second configuration is designed for the investigation of monolayers of mammalian cells. In both cases the sample compartment is part of a temperature regulated perfusion system. Images obtained with the combined system are shown forXenopus laevis oocytes, model JB6 tumor spheroids, and a single layer of Chinese hamster ovary cells. Finally, potential applications of the combined microscope are discussed.     

Algebraic models defined over Q of differential manifolds

Here we prove that every compact differential manifold has a smooth algebraic model defined over Q. In dimension 2 we find an algebraic model (may be singular) defined over Q and birational over Q to the projective plane.     

Level structure of 68 149 Er81 and high-spin isomerism in proton-richN=81, 82, 83 nuclei

The level structure of theN=81 nucleus¹⁴⁹Er has been studied by γ-ray spectroscopy following the reaction⁹²Mo+255 MeV⁶⁰Ni. Yrast levels in¹⁴⁹Er are established up to ~3.3 MeV, including 0.61 and 4.8 μs isomeric states. Most of the observed levels are interpreted as seniority-three states arising from the coupling of s_1/2, d_3/2 and h_11/2 neutron holes with πh ₁₁ ^2/n . Isomers identified in the reaction⁹⁶Ru+255 MeV⁵⁸Ni are tentatively assigned to¹⁵¹Yb. TheB (E2) values of high-spin isomers inZ=66?70,N=81?83 nuclei are surveyed.     

Ammonia chemical ionization tandem mass spectrometry in structural determination of alkaloids. II. Tetraponerines from pseudomyrmecine ants

Chemical ionization tandem mass spectrometry (CI-MS/MS) of alkaloids with ammonia reagent gas and collision-activated dissociation as well as EI-MS/MS were applied to the tetraponerine alkaloids in extracts from six pseudomyrmecine ants of the genus Tetraponera. The MS/MS techniques along with gas chromatography Fourier transform infrared (GC/FTIR) spectra allowed identification in two extracts of seven of the eight known tetraponerines. The EI-MS/MS fragmentations proved diagnostic for the ring system and the CI-MS/MS patterns for the C-8 or C-9 substitution, while the Bohlmann bands in FTIR spectra were diagnostic for the C-8 or C-9 configurations. An Indian ant (T. allaborans) had T-2, T-4 and T-8, while a Chinese ant (T. binghami) had T-5, T-6, T-7 and T-8. Four other ants, T. rufonigra (India), T. penzigi (Africa), T. clypeata (Africa) and T. sp. cf. emeryi (Africa), had no tetraponerines.     

Copolymerization characteristics of S-vinyl-O-tert-butylthiocarbonate

Poly-S-vinyl-O-tert-butylthiocarbonate is an excellent precursor to poly(vinyl mercaptan) because the tert-butyloxycarbonyl blocking group can be removed by either acid hydrolysis or thermolysis under conditions which minimize the oxidation of the liberated mercaptan to disulfide. Dilatometric studies of the homopolymerization of S-vinyl-O-tert-butylthiocarbonate demonstrated that the polymerization rate was directly proportional to the concentration of free-radical initiator; no thermal initiation was observed. The molecular weight of the homopolymers and copolymers ranged from 30,000 to 50,000 (GPC). Copolymerization of S-vinyl-O-tert-butylthiocarbonate (M₂) with styrene, (r₁ = 3.0, r₂ = 0.2), methyl methacrylate (r₁ = 1.40, r₂ = 0.17) and vinyl acetate (r₁ = 0.04, r₂ = 11.0) indicated that a sulfur atom adjacent to the vinyl group increases the resonance stability (Q₂ = 0.5) and the electron density (e₂ = ?1.4) of the double bond and the corresponding radical. Water-soluble copolymers could be prépared by incorporating either N-vinylpyrrolidone (r₁ = 0.12, r₂ = 3.94) or N-isopropylacrylamide (r₁ = 1.17, r₂ = 0.3) with M₂. The water solubility of the copolymers decreased markedly when the tert-butyloxycarbonyl group was removed. Copolymers of M₂ with N-vinyl-O-tert-butylcarbamate (r₁ = 0.13, r₂ = 5.10) were utilized to prepare crosslinked poly(vinyl amine–vinyl mercaptan); the crosslinking resulted from urea linkages formed during thermolysis of the copolymer.     

Structure of New 2-Oxo-2,8-dihydro-[l,2,4]oxadiazolo-[2,3-a]pyrimidinecarbamates

The structure of new 2-oxo-2,8-dihydro-[l,2,4]oxadiazolo-[2,3-a]pyrimidine-carbamates 1 was established by correlating the IR. and NMR. data with these of analogous compounds. A X-ray crystallographic analysis of 1c gave an unequivocal proof of structural assignment.     

Zur Konfiguration des Vitamin-D3-Metaboliten 25, 26-Dihydroxycholecalciferol: Synthese von (25S,26)- und (25R,26)-Dihydroxycholecalciferol

Configuration of the Vitamin-D₃-Metabolite 25,26-Dihydroxycholecalciferol: Synthesis of (25S,26)- and (25R,26)-Dihydroxycholecalciferol For selective synthesis of the title compounds, (25S)- 1b and (25R)- 1b (Scheme 1), the protected cholesterol precursors (25S)- 6 and (25R)- 6 were prepared from stigmasterol-derived steroid-units 4a-d and C₅-side chain building blocks 5a–d by Grignard- or Wittig-coupling (Scheme 2), the configuration at C(25) of the target compounds being already present in the C₅-units. Conversion of the cholesterol intermediates to the corresponding vitamin-D₃ derivatives was carried out via the 7,8-didehydrocholesterol compounds (25S)- 2b and (25R)- 2b (Scheme 1), using the established photochemical-thermal transformation of the 5,7-diene system to the seco-triene system of cholecalciferol. The configuration at C(25) of the cholesterol precursors as assigned on basis of the known configuration of the C₅-units used, was found to be in agreement with the result of a single crystal X-ray analysis on compound 11 . The configuration at C(25) remained untouched on conversion of the cholesterol ring system to the seco-triene system of vitamin D₃ as evident from comparison of the lanthanide-induced CD. Cotton effects observed for (25S)- 3b and (25S) 1b . 25,26-Dihydroxycholecalciferol observed as a natural vitamin-D₃ metabolite has (25S)-configuration.