Iminophosphines: synthesis, formation of 2,3-dihydro-1H-benzo[1,3]azaphosphol-3-ium salts and N-(pyridin-2-yl)-2-diphenylphosphinoylaniline, coordination chemistry and applications in platinum group catalyzed Suzuki coupling reactions and hydrosilylations

The aprotic and protic bi- and multidentate iminophosphines 2-Ph₂PC₆H₄N=CR¹R² (R¹=H, R²=Ph=2a; R¹=Me R²=Ph=2b; R¹=H, R²=2-thienyl=2c; R¹=H, R²=C₆H₄-2-PPh₂=2d; R¹=H, R²=C₆H₄-2-OH=2e, R¹=H, R²=C₆H₄-2-OH-3-Bu^t=2f; R¹=H, R²=CH₂C(O)Me=2g) have been prepared by the acid catalyzed condensation of 2-(diphenylphosphino)aniline with the corresponding aldehyde–ketone. Iminophosphine 2d can be reduced with sodium cyanoborohydride to give the corresponding amino-diphosphine 2-Ph₂PC₆H₄N(H)CH₂C₆H₄-2-PPh₂ (2h). In the presence of a stoichiometric quantity of acid, 2-(diphenylphosphino)aniline reacts in an unexpected manner with benzaldehyde, salicylaldehyde, or acetophenone to give the corresponding 2,3-dihydro-1H-benzo[1,3]azaphosphol-3-ium salts and with pyridine-2-carboxaldehyde to give N-(pyridin-2-ylmethyl)-2-diphenylphosphinoylaniline, the latter of which has been characterized by single-crystal X-ray crystallography, as its palladium dichloride derivative. The attempted condensation of 2-(diphenylphosphino)aniline with pyridine-2-carboxaldehyde to give the corresponding pyridine-functionalized iminophosphine resulted in an unusual transformation involving the diastereoselective addition of two equivalents of aldehyde to give 1,2-dipyridin-2-yl-2-(o-diphenylphosphinoyl)phenylamino-ethanol, which has been characterized by a single-crystal X-ray structure determination. The bidentate iminophosphine 2-Ph₂PC₆H₄N=C(H)Ph reacts with [(cycloocta-1,5-diene)PdClX] X=Cl, Me) to give [Pd{2-Ph₂PC₆H₄N=C(H)Ph}ClX] and the imino-diphosphine 2-Ph₂PC₆H₄N=C(H)C₆H₄-PPh₂ reacts with [(cycloocta-1,5-diene)PdClMe] to give [Pd{2-Ph₂PC₆H₄N=C(H)C₆H₄---PPh₂}ClMe] and each has been characterized by single-crystal X-ray crystallography. The monobasic iminophosphine 2-Ph₂PC₆H₄N=C(Me)CH₂C(O)Me reacts with [Ni(PPh₃)₂Cl₂] in the presence of NaH to give the phosphino–ketoiminate complex [Ni{2-Ph₂PC₆H₄N=C(Me)CHC(O)Me}Cl], which has been structurally characterized. Mixtures of iminophosphines 2a–h and a palladium source catalyze the Suzuki cross coupling of 4-bromoacetophenone with phenyl boronic acid. The efficiency of these catalysts show a marked dependence on the palladium source, catalysts formed from [Pd₂(OAc)₆] giving consistently higher conversions than those formed from [Pd₂(dba)₃] and [PdCl₂(MeCN)₂]. Catalysts formed from neutral bi- and terdentate iminophosphines 2a–d gave significantly higher conversions than those formed from their monobasic counterparts 2e–f. Notably, under our conditions the conversions obtained with 2a–c compare favorably with those of the standards; catalysts formed from tris(2-tolyl)phosphine and tris(2,4-di-tert-butylphenyl)phosphite and a source of palladium. In addition, mixtures of [Ir(COD)Cl]₂ and 2a–h are active for the hydrosilylation of acetophenone; in this case catalysts formed from monobasic iminophosphines 2e–f giving the highest conversions.     

Fluorescence study of an immobilized ligand—metal ion complex

A ligand known to form a fluorescent complex with aluminum ion was immobilized on silica gel. The immobilization sequence was verified by cross-polarization magicangle spinning n.m.r. spectroscopy and diffuse reflectance u.v. spectroscopy. The solid-state fluorescence of the immobilized ligand complexed with aluminum ion was similar to the fluorescence of a solvated complex of a model ligand. The potential to eliminate possible interfering species by isolating the complex from solution was demonstrated.     

Microchannel wall coatings for protein separations by capillary and chip electrophoresis

The necessity for microchannel wall coatings in capillary and chip-based electrophoretic analysis of biomolecules is well understood. The regulation or elimination of EOF and the prevention of analyte adsorption is essential for the rapid, efficient separation of proteins and DNA within microchannels. Microchannel wall coatings and other wall modifications are especially critical for protein separations, both in fused-silica capillaries, and in glass or polymeric microfluidic devices. In this review, we present a discussion of recent advances in microchannel wall coatings of three major classes--covalently linked polymeric coatings, physically adsorbed polymeric coatings, and small molecule additives. We also briefly review modifications useful for polymeric microfluidic devices. Within each category of wall coatings, we discuss those used to eliminate EOF, to tune EOF, to prevent analyte adsorption, or to perform multiple functions. The knowledgeable application of the most promising recent developments in this area will allow for the separation of complex protein mixtures and for the development of novel microchannel wall modifications.     

Critical factors for high-performance physically adsorbed (dynamic) polymeric wall coatings for capillary electrophoresis of DNA

Physically adsorbed (dynamic) polymeric wall coatings for microchannel electrophoresis have distinct advantages over covalently linked coatings. In order to determine the critical factors that control the formation of dynamic wall coatings, we have created a set of model polymers and copolymers based on N,N-dimethylacrylamide (DMA) and N,N-diethylacrylamide (DEA), and studied their adsorption behavior from aqueous solution as well as their performance for microchannel electrophoresis of DNA. This study is revealing in terms of the polymer properties that help create an "ideal" wall coating. Our measurements indicate that the chemical nature of the coating polymer strongly impacts its electroosmotic flow (EOF) suppression capabilities. Additionally, we find that a critical polymer chain length is required for polymers of this type to perform effectively as microchannel wall coatings. The effective mobilities of double-stranded (dsDNA) fragments within dynamically coated capillaries were determined in order to correlate polymer hydrophobicity with separation performance. Even for dsDNA, which is not expected to be a strongly adsorbing analyte, wall coating hydrophobicity has a deleterious influence on separation performance.     

DETECTION OF DNA-PSORALEN PHOTOADDUCTS in situ

Abstract— An immunological method, with the use of specific immune serum, has been developed for detection of 8-methoxypsoralen (8-MOP) photoadducts to DNA, formed in situ in cell nuclei, after combined treatment with 8MOP and UV-A irradiation (Zarçbska et al. , 1978). Lymphocytes fixed on slides or in suspension, and cryostat sections of different mammalian tissues, served as antigenic substrate, after treatment with 8-MOP and UV-A in vitro. Specific fluorescence in these substrates was detected in the nuclei after treatment with 30 ˜ 140 kJ/m² UV-A in the presence of 0.1-0.3 μg/cm² 8-MOP. PHA-stimulated-lymphocytes appeared to be the most sensitive substrate.
However, hairless mice treated with high doses of UV-A in vivo , 70 ˜ 360 kJ/m² did not reveal a specific fluorescence of epidermal nuclei, unless a high local concentration of 8-MOP was attained.
The apparent discrepancy in the level of photoadduct detection between the in vitro and in vivo treated specimens was explained by the low number of DNA-8-MOP-photoadducts formed in vivo under these experimental conditions. The relevance of these findings to the role of DNA-8-MOP-photoadducts formed during PUVA photochemotherapy is discussed.     

Dithiocarbamate complexes of cyclopentadienylcobalt(III), [Co(η-C5H5)(L)(S2CNR2)] (L = ligand)

The reactions of [Co(η-C₅H₅)(L)I₂] with Na[S₂CNR₂] (R = alkyl or phenyl) give [Co(η-C₅H₅)(I)(S₂CNR₂)] (I) when L = CO and [Co(η-C₅H₅)(L)(S₂CNR₂)]I (II) when L is a tertiary phosphine, phosphite or stibine, or organo-isocyanide ligand. In similar reactions [Co(η-C₅H₅)(CO)(C₃F₇)I] gives [Co(η-C₅H₅)(C₃F₇)(S₂CNMe₂)] and [Mn(η-MeC₅H₄)(CO)₂(NO)]PF₆ forms [Mn(η-MeC₅H₄)(NO)(S₂CNR₂)]. The iodide ligands in I may be displaced by L, to give II, or by other ligands such as [CN]^?, [NCS]^?, H₂O or pyridine whilst SnCl₂ converts it to SnCl₂I. The iodide counter-anion in II may be replaced by others to give [BPh₄]^?, [Co(CO)₄]^? or [NO₃]^? salts. However [CN]^? acts differently and displaces (PhO)₃P from [Co(η-C₅H₅){P(OPh)₃}(S₂CNMe)]I to give [Co(η-C₅H₅)(CN)(S₂CNMe₂)] which may be alkylated reversibly by MeI and irreversibly by MeSO₃F to [Co(η-C₅H₅)(CNMe)(S₂CNMe₂)]⁺ salts. Conductivity measurements suggest that solutions of I in donor solvents are partially ionized with the formation of [Co(η-C₅H₅)(solvent)(S₂CNR₂)]⁺ I^? species. The IR and ¹H NMR spectra of the various complexes are reported. They are consistent with pseudo-octahedral “pianostool” molecular structures in which the bidentate dithiocarbamate ligands are coordinated to the metal atoms through both sulphur atoms.     

DNA sequencing and genotyping in miniaturized electrophoresis systems

Advances in microchannel electrophoretic separation systems for DNA analyses have had important impacts on biological and biomedical sciences, as exemplified by the successes of the Human Genome Project (HGP). As we enter a new era in genomic science, further technological innovations promise to provide other far-reaching benefits, many of which will require continual increases in sequencing and genotyping efficiency and throughput, as well as major decreases in the cost per analysis. Since the high-resolution size- and/or conformation-based electrophoretic separation of DNA is the most critical step in many genetic analyses, continual advances in the development of materials and methods for microchannel electrophoretic separations will be needed to meet the massive demand for high-quality, low-cost genomic data. In particular, the development (and commercialization) of miniaturized genotyping platforms is needed to support and enable the future breakthroughs of biomedical science. In this review, we briefly discuss the major sequencing and genotyping techniques in which high-throughput and high-resolution electrophoretic separations of DNA play a significant role. We review recent advances in the development of technology for capillary electrophoresis (CE), including capillary array electrophoresis (CAE) systems. Most of these CE/CAE innovations are equally applicable to implementation on microfabricated electrophoresis chips. Major effort is devoted to discussing various key elements needed for the development of integrated and practical microfluidic sequencing and genotyping platforms, including chip substrate selection, microchannel design and fabrication, microchannel surface modification, sample preparation, analyte detection, DNA sieving matrices, and device integration. Finally, we identify some of the remaining challenges, and some of the possible routes to further advances in high-throughput DNA sequencing and genotyping technologies.     

Thermoresponsive N,N-dialkylacrylamide copolymer blends as DNA sieving matrices with a thermally tunable mesh size

In an earlier study we showed that a blend of thermoresponsive and nonthermoresponsive hydroxyalkylcelluloses could be used to create a thermally tunable polymer network for double-stranded (ds) DNA separation. Here, we show the generality of this approach using a family of polymers suited to a wider range of DNA separations: a blended mixture of N,N-dialkylacrylamide copolymers with different thermoresponsive behaviors. A mixture of 47% w/w N,N-diethylacrylamide (DEA)/53% w/w N,N-dimethylacrylamide (DMA) (DEA47; thermoresponsive, transition temperature = 55 degrees C in water) and 30% w/w DEA/70% w/w DMA (DEA30; nonthermoresponsive, transition temperature > 85 degrees C in water) copolymers in the ratio of 1:5 w/w DEA47:DEA30 was used to separate a dsDNA restriction digest (PhiX174-HaeIII). We investigated the effects of changing mesh size on dsDNA separation, as controlled by temperature. We observed good DNA separation performance with the copolymer blend at temperatures ranging from 25 degrees C to 48 degrees C. The separation selectivity was evaluated quantitatively for certain DNA fragment pairs as a function of temperature. The results were compared with those obtained with a control matrix consisting only of the nonthermoresponsive DEA30. Different DNA fragment pairs of various sizes show distinct temperature-dependent selectivities. Over the same temperature range, no significant temperature dependence of selectivity is observed for these DNA fragment pairs in the nonthermoresponsive control matrix. Overall, the results show similar trends in the temperature dependency of separation selectivity to what was previously observed in hydroxyalkylcellulose blends, for the same DNA fragment pairs. Finally, we showed that a ramped temperature scheme enables improved separation in the blended copolymer matrix for both small and large DNA fragments, simultaneously in a single capillary electrophoresis (CE) run.     

Studies on polymers and composites from lignin and fiber derived from sugar cane

Sugarcane fiber (i.e. bagasse) lignin has a larger fraction of aromatics unsubstitution in the ortho position than hardwood or softwood lignin and hence has the greater ability to be derivatized. Furthermore, organosolv lignin has a higher purity than sulfonated and kraft lignins. This work examines the purification of organosolv lignin derived from bagasse and the physico‐chemical properties of the lignin and lignin‐phenol formaldehyde (PF) resin coatings, and composites. The wetability tests have shown that lignin and lignin‐PF resin films are effective water barrier coatings, though the contact angles of lignin‐PF resin films were considerably less than the wax films. The overall mechanical properties (i.e. peak stress, peak strain and modulus) of the bagasse fiber composites were lower than the values obtained with the composites without the inclusion of bagasse fiber. Copyright © 2007 John Wiley & Sons, Ltd.