Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Phosphonomethylation of 2-aminoethanethiol and thiazolidine. An unexpected product

Phosphonomethylation of 2-aminoethanethiol and thiazolidine gives the unexpected dimethylene diphosphonic acid 6.     

Antistatic applications of conducting polyaniline

A method is described to impart flexibility and mechanical strength to conducting polyaniline by polymerizing aniline on fabrics and on cellulose papers. The study indicates that these conducting fabrics offer 16–18 dB of shielding effectiveness for the control of electromagnetic interference (EMI) up to a frequency of 10³ MHz.     

1-Phenyl-6,7-disubstituted-aminopropyl)-1,2,3,4-tetrahydroisoquinolines as possible antituberculer agents

The Condensation of 3,4-disubstituted phenylethylamine and benzaldehyde furnished l-phenyl-6,7-disubstituted-1,2,3,4-tetrahydroisoquinolines l. which on reaction with 1,3-dibromopropane gave l-phenyl-6,7-disubstituted-2-(3-bromoprophyl)-1,2,3,4-tetrahydroisoquinolines 2. The reaction of 2 with different secondary amines resulted in the synthesis of 3. The compounds 3 were screened for their in vitro antituberculer activity against Mycobacterium smegmatis, and some of them have been found to be total inhibitors of M. Smegmatis     

EPR Studies of Oxo-Molybdenum(V) Complexes with Sulfur Donor Ligands: Implications for the Molybdenum Center of Sulfite Oxidase

A series of six-coordinate compounds containing a chelating dithiolate coordinated to the [LMo(V)O](2+) unit (L = hydrotris(3,5-dimethyl-1-pyrazolyl)borate) have been characterized by EPR spectroscopy as models for the molybdenum centers of pterin-containing molybdenum enzymes. The structure of LMoO(bdt) (1) (bdt = 1,2-benzenedithiolate) has been determined by X-ray crystallography; the space group is P2(1)/n with a = 10.727(1) ?, b = 14.673(2) ?, c = 15.887(2) ?, beta = 100.317(4) degrees and Z = 4. Compound 1 exhibits distorted octahedral stereochemistry; the terminal oxo group and the sulfur atoms are mutually cis to one another. The Mo=O distance is 1.678(4) ?, and the average Mo-S distance is 2.373(2) ?. The EPR parameters for 1, determined from simulation of the frozen-solution spectrum, are g(1) = 2.004, g(2) = 1.972, g(3) = 1.934 and A(1)((95,97)Mo) = 50.0 x 10(-)(4), A(2) = 11.4 x 10(-)(4), A(3) = 49.7 x 10(-)(4) cm(-)(1). The EPR parameters for several LMo(V)O{S(CH(2))(x)()S} compounds (x = 2-4) with saturated chelate skeletons are similar to those of 1, indicating that it is the coordinated S atoms and not unsaturation of the chelate skeleton that gives rise to the large g values for 1. The presence of g components larger than the free-electron value is ascribed to low-energy charge transfer transitions from the filled sulfur pi orbitals to half-filled Mo d orbitals. The EPR spectrum of [LMo(V)O{S(2)P(OEt)(2)}](+) shows an unusually large isotropic (31)P hyperfine splitting of 66.1 x 10(-)(4) cm(-)(1) from the noncoordinated phosphorus atom. The frozen-solution EPR spectra of the low-pH and high-pH forms of sulfite oxidase have been reinvestigated in D(2)O and the anisotropic g and A((95,97)Mo) parameters determined by simulation of the spectrum arising from the naturally abundant Mo isotopes (75% I = 0, 25% I = (5)/(2)). The EPR parameters for the low-pH form are g(1) = 2.007, g(2) = 1.974, g(3) = 1.968 and A(1) = 56.7 x 10(-)(4), A(2) = 25.0 x 10(-)(4), A(3) = 16.7 x 10(-)(4) cm(-)(1). The EPR parameters for the high-pH form are g(1) = 1.990, g(2) = 1.966, g(3) = 1.954 and A(1) = 54.4 x 10(-)(4), A(2) = 21.0 x 10(-)(4), A(3) = 11.3 x 10(-)(4) cm(-)(1). These are the first determinations of the complete A((95,97)Mo) hyperfine components for an enzyme that possesses an [Mo(VI)O(2)](2+) core in its fully oxidized state.     

An Anthracene-Based Metal-Organic Framework for Selective Photo-Reduction of Carbon Dioxide to Formic Acid Coupled with Water Oxidation

A Zr-based metal-organic framework has been synthesized and employed as a catalyst for photochemical carbon dioxide reduction coupled with water oxidation. The catalyst shows significant carbon dioxide reduction property with concomitant water oxidation. The catalyst has broad visible light as well as UV light absorption property, which is further confirmed from electronic absorption spectroscopy. Formic acid was the only reduced product from carbon dioxide with a turn-over frequency (TOF) of 0.69 h⁻¹ in addition to oxygen, which was produced with a TOF of 0.54 h⁻¹. No external photosensitizer is used and the ligand itself acts as the light harvester. The efficient and selective photochemical carbon dioxide reduction to formic acid with concomitant water oxidation using Zr-based MOF as catalyst is thus demonstrated here.     

Size dependent structural and magnetic behaviour of CaFe2O4

CaFe₂O₄ nanocrystalline powders were synthesized through sol–gel treatment in which the stoichiometric mixing of various nitrates involving calcium and iron in presence of citric acid was performed. Subsequently, the as prepared sample was annealed at various temperatures in order to obtain the fine distribution of size including the bulk counterpart. The samples were then characterized using powder X-ray diffraction followed by ⁵⁷Fe Mössbauer spectroscopy, SQUID as well as vibrating sample magnetometry. The results of spectroanalyses revealed that the samples were formed in single phase cubic spinel structure and exhibits room temperature superparamagnetism, except the bulk one, which crystallizes in characteristic orthorhombic structure of CaFe₂O₄ and displays trivial coercivity and remanent magnetization at room temperature.     

NOVEL UNSYMMETRICAL N,N-BIS(METHYLENE)BISPHOSPHONIC ACIDS OF α,ω-DIAMINES. PREPARATION AND CHARACTERIZATION OF [[(2-AMINOETHYL)IMINO]BIS(METHYLENE)]BISPHOSPHONIC ACID AND [[(6-AMINOHEXYL)IMINO]BIS(METHYLENE)]BISPHOSPHONIC ACID

Abstract

Reaction of ethylenediamine with phosphorous acid and formaldehyde in molar ratio 1:2:2 gives [[(2-aminoethyl)imino]bis(methylene)]bisphosphonic acid (2a) as the major product. Similarly, reaction of hexamethylenediamine with phosphorous acid and formaldehyde in molar ratio 1:2:2 yields [[(6-aminohexyl)imino]bis(methylene)]bisphosphonic acid (2b) which is isolated either as [[(6-carbobenzoxyaminohexyl)imino]bis](methylene)]bisphosphonic acid (3b) or as [[6-(N-benzoylamino)hexyl)imino]bis(methylene)]bisphosphonic acid (4b). Removal of the carbobenzoxy group with HBr from 3b or the benzoyl group with HCl from 4b gives pure [[(6-aminohexyl)imino]bis(methylene)]bisphosphonic acid (2b). All compounds were characterized by ¹³C NMR, ³¹P NMR and elemental analysis.