Controlled structure and density of “living” polystyrene brushes on flat silica surfaces

Thin layers of polystyrene were grown from surface-grafted nitroxide initiators via controlled “living” free radical polymerization. The “reactive” Langmuir-Blodgett deposition method allowed an effective control of the initiator layer density leading to PS brushes with different and high grafting density and stretching. The influence of the grafting density on the layer structure was studied. Comparison with theoretical predictions for monodispersed brushes in bad solvent was discussed. The thickness was found to vary linearly with molecular weight and the density dependence was shown using wetting measurements. Special features of controlled radical nitroxide polymerization from a surface were discussed. A direct comparison of the molecular weight and polydispersity between surface and bulk polymers was made by de-grafting the brushes into a toluene/HF solution. Finally, some evidence of a “surface Fischer” effect was shown from re-initiated layers. Received 20 December 2001     

First measurement of the ϱ spectral function in nuclear collisions

The NA60 experiment at the CERN SPS has studied low-mass muon pairs in 158 A GeV In–In collisions. A strong excess of pairs is observed above the yield expected from neutral meson decays. The unprecedented sample size close to 400000 events and the good mass resolution of about 2% made it possible to isolate the excess by subtraction of the decay sources. The shape of the resulting mass spectrum shows some non-trivial centrality dependence, but is largely consistent with a dominant contribution from π⁺π^-→ϱ→μ⁺μ^- annihilation. The associated ϱ spectral function exhibits considerable broadening, but essentially no shift in mass. The p_T-differential mass spectra show the excess to be much stronger at low p_T than at high p_T. The results are compared to theoretical model predictions; they tend to rule out models linking hadron masses directly to the chiral condensate. PACS 25.75.-q; 12.38.Mh; 13.85.Qk     

Differential scanning calorimetry studies on aged iron(III)-chromium(III)-hydroxide coprecipitates

DSC measurements in air from 20 to 800° are reported on aged iron(III)-chromium(III) coprecipitated hydroxides (with Fe³⁺Cr³⁺ wt% ratios of 91, 73, 11, 37 and 19). A comparison of the DSC profiles of aged coprecipitates with the thermal behaviour of freshly precipitated and well characterized samples provided information on the modification occurring in the structure and reactivity of the coprecipitates on prolonged aging.

---

Zusammenfassung Es werden DSC-Messungen an gealterten kogefällten Eisen(III)Chrom(III)-hydroxiden (mit Fe³⁺Cr³⁺ Gewichtsanteilen von 91, 73, 11, 37 und 19) im Temperaturbereich von 20 bis 800° beschrieben. Ein Vergleich der DSC-Profile von gealterten Kofällungen mit dem thermischen Verhalten frisch gefällter und gut definierbarer Proben lieferte Informationen über die Veränderungen in Struktur und Reaktivität der Koniederschläge bei längerem Altern.

---

---

Dedicated to Professor Wahid U. Malik, Founder-President, Indian Council of Chemists, India, with profound regards and fond memories of his youthful enthusiasm and ceaseless and pioneering efforts towards the development of chemical education and research activities at the University of Roorkee, Roorkee, India, on the occasion of his 70th birthday.

---

Paper presented at the World Conference on Thermal Analysis, Capri (Italy), 1989.

---

We thank Professor J. Pescia, Dr.G. Ablart and N. Favillier of Laboratoire de Magnétisme et d'Electronique Quantique for their interest in this work. A. C. Vajpei expresses his gratefulness to C.N.R.S. and C.N.O.U.S., Paris, for financial support of this work.     

Thermal degradation of poly(methyl-n-hexylsilylene)

Thermal degradation of poly(methyl-n-hexylsilane) in the solid state in absence of oxygen reveals formation of a cyclic pentamer between 150 and 250°C. Polymer is gradually degraded to an intermediate molecular weight distribution. The weight average of this new distribution is not only temperature-dependent, but is also a function of viscosity of the polymer and nature of chain ends. As no insolubles or Si? H groups are formed, the degradation mechanism is most likely a back-biting mechanism induced by active chain ends such as silyl anions or Si? Cl rather than a homolytic cleavage of the main chain. A concurrent intramolecular rearrangement reaction is also proposed. Moreover, this study proposes an explanation to the trimodal molecular weight distribution obtained by the Wurtz coupling of dichlorosilanes with molten sodium in refluxing toluene. © 1995 John Wiley & Sons, Inc.     

Curing of a maleimide model compound

A monofunctional maleimide-ended model compound was synthesized and purified. The thermal curing of this compound was followed by size exclusion chromatography and the molecular masses of the oligomers formed during the curing reaction were determined by mass spectroscopy. It was found that high molecular mass species were not thermally stable. At high temperature and after enough time, a strong decrease in the polydispersity of the oligomers and a significantly preferential formation of trimer were observed. From ¹³C-NMR characterization, a five membered ring structure was found for the trimer, which explains the thermal stability of this species. © 1995 John Wiley & Sons, Inc.     

Bisphenol-A polycarbonate–poly(butylene terephthalate) transesterification. II. Structure analysis of the reaction products by IR and 1H and 13C NMR

The structure of the four-component copolyester resulting from the exchange reaction between molten bisphenol-A polycarbonate and poly(butylene terephthalate) is analyzed as a function of the reaction time by infrared and nuclear magnetic resonance spectroscopy. By applying a statistical method developed earlier, the mean chain length of the various sequences as well as the degree of randomness is computed. The exchange reaction leads initially to the formation of a block copolyester with reduced solubility. As the reaction proceeds, a soluble random copolycondensate is progressively formed.     

Photon channelling in foams

Experiments by Gittings, Bandyopadhyay and Durian (Europhys. Lett. 65, 414 (2004)) demonstrate that light possesses a higher probability to propagate in the liquid phase of a foam due to total reflection. The authors term this observation photon channelling which we investigate in this article theoretically. We first derive a central relation in the work of Gitting et al. without any free parameters. It links the photon's path-length fraction f in the liquid phase to the liquid fraction ɛ. We then construct two-dimensional Voronoi foams, replace the cell edges by channels to represent the liquid films and simulate photon paths according to the laws of ray optics using transmission and reflection coefficients from Fresnel's formulas. In an exact honeycomb foam, the photons show superdiffusive behavior. It becomes diffusive as soon as disorder is introduced into the foams. The dependence of the diffusion constant on channel width and refractive index is explained by a one-dimensional random-walk model. It contains a photon channelling state that is crucial for the understanding of the numerical results. At the end, we shortly comment on the observation that photon channelling only occurs in a finite range of ɛ.     

Surface plasmon polaritons and their role in the enhanced transmission of light through periodic arrays of subwavelength holes in a metal film

We present results of the transmitted, reflected, and absorbed power associated with the enhanced transmittance of light through a silver film pierced by a periodic array of subwavelength holes. Comparing experimentally acquired dispersion curves under different polarization conditions shows that the transmission features of the array are consistent with p-polarized resonant modes of the structure. By exploring the regime in which no propagating diffracted orders are allowed, we further show that the transmittance maxima are associated with both reflectance minima and absorption maxima. These new results provide strong experimental evidence for transmission based on diffraction, assisted by the enhanced fields associated with surface plasmon polaritons.     

Electronic and vibrational properties of fluorenone in the channels of zeolite L

Fluorenone (C13H8O) was inserted into the channels of zeolite L by using gas-phase adsorption. The size, structure, and stability of fluorenone are well suited for studying host-guest interactions. The Fourier transform IR, Raman, luminescence, and excitation spectra, in addition to thermal analysis data, of fluorenone in solution and fluorenone/zeolite L are reported. Normal coordinate analysis of fluorenone was performed, based on which IR and Raman bands were assigned, and an experimental force field was determined. The vibrational spectra can be used for nondestructive quantitative analysis by comparing a characteristic dye band with a zeolite band that has been chosen as the internal standard. Molecular orbital calculations were performed to gain a better understanding of the electronic structure of the system and to support the interpretation of the electronic absorption and luminescence spectra. Fluorenone shows unusual luminescence behavior in that it emits from two states. The relative intensity of these two bands depends strongly on the environment and changes unexpectedly in response to temperature. In fluorenone/zeolite L, the intensity of the 300 nm band (lifetime 9 micros) increases with decreasing temperature, while the opposite is true for the 400 nm band (lifetime 115 micros). A model of the host-guest interaction is derived from the experimental results and calculations: the dye molecule sits close to the channel walls with the carbonyl group pointing to an Al3+ site of the zeolite framework. A secondary interaction was observed between the fluorenone's aromatic ring and the zeolite's charge-compensating cations.     

Dünne Lamellen und ihre physikalischen Eigenschaften

Ohne Zusammenfassung übersetzt von K. Popp (Dresden).