Growth of oxide thin films for optical gas sensor applications

Tungsten trioxide and titanium dioxide thin films were synthesised by pulsed laser deposition. We used for irradiations of oxide targets an UV KrF* (λ = 248 nm, τ_FWHM ≅ 20 ns, ν = 2 Hz) excimer laser source, at 2 J/cm² incident fluence value. The experiments were performed in low oxygen pressure. The (0 0 1) SiO₂ substrates were heated during the thin film deposition process at temperature values within the 300-500 °C range. The structure and crystalline status of the obtained oxide thin films were investigated by high resolution transmission electron microscopy. Our analyses show that the films are composed by nanoparticles with average diameters from a few to a few tens of nm. Moreover, the films deposited at substrate temperatures higher than 300 °C are crystalline. The tungsten trioxide films consist of a mixture of triclinic and monoclinic phases, while the titanium dioxide films structure corresponds to the tetragonal anatase phase. The oxide films average transmittance in the visible-infrared spectral range is higher than 80%, which makes them suitable for sensor applications.     

O2 interaction and reactivity on a model hydroxylated rutile(110) surface

Recently several theoretical studies have examined oxygen adsorption on the clean, reduced TiO2(110) surface. However the photocatalytic behavior of TiO2 and the scavenging ability of oxygen are known to be influenced by the presence of surface hydroxyls. In this paper the chemistry of O2 on the hydroxylated TiO2 surface is investigated by means of first-principles total energy calculations and molecular dynamics (MD) simulations. The MD trajectories show a direct, spontaneous reaction between O2 and the surface hydroxyls, thus supporting the experimental hypothesis that the reaction does not necessarily pass through a chemisorbed O2 state. Following this reaction, the most stable chemisorbed intermediates are found to be peroxide species HO2 and H2O2. Although these intermediates are very stable on the short time scale of MD simulations, the energetics suggests that their further transformation is connected to a new 300 K feature observed in the experimental water temperature programmed desorption (TPD) spectrum. The participation of two less stable intermediate states, involving terminal hydroxyls and/or chemisorbed water plus oxygen adatoms, to the desorption process, is not supported by the total energy calculations. Analysis of the projected density of states, however, suggests the possibility that these intermediates have a role in completing the surface oxidation immediately before desorption.     

Single electron traps at the surface of polycrystalline MgO: assignment of the main trapping sites

Paramagnetic centers at the surface of ionic oxides in the form of trapped electrons can be generated by exposure of the material to alkali metal or hydrogen atoms or of molecular hydrogen under UV irradiation. For many years, it has been assumed that the resulting paramagnetic centers consist of oxygen vacancies filled by one electron. High-resolution electron spin resonance spectra and ab initio quantum chemical calculations show that the paramagnetic centers consist of (H(+))(e(-)) electron pairs formed at morphological irregularities of the surface. At least three different kinds of (H(+))(e(-)) centers, [A], [B], and [C], have been identified with abundances of 80%, 10%, and 8%, respectively. In this work, we compare a wide set of measured and computed g-factors and hyperfine coupling constants of the unpaired electron with the surrounding (25)Mg, (17)O, and (1)H nuclei and we propose a general assignment of the centers. (H(+))(e(-)) pairs formed at Mg(4c) ions at steps and edges account for species [A], centers formed at Mg(4c) ions at reverse corners correspond to species [B], and species [C] originates from (H(+))(e(-)) pairs formed at Mg(3c) ions at corners and kinks.     

Analysis of gadobenate dimeglumine by capillary zone electrophoresis coupled with electrospray-mass spectrometry

Highly reliable and accurate analytical methods are needed for the determination of magnetic resonance imaging (MRI) contrast agents in complex matrices of clinical interest. We demonstrate the reliability of capillary zone electrophoresis (CZE) coupled with electrospray ionization-mass spectrometry (ESI-MS) for the analysis of MultiHance (gadobenate dimeglumine), a gadolinium-based MRI agent. A sheath liquid interface connected the CE system with an electrospray mass spectrometer equipped with an ion-trap analyzer. CZE with ultraviolet (CZE-UV) and with mass detection (CZE-MS) were compared by analyzing gadobenate dimeglumine and the free ligand diluted in water and in biological fluids (i.e., human serum and urine). The optimization of some relevant CZE-MS parameters was accomplished, like CE buffer composition, sheath liquid composition and flow, and type and length of the separation capillary. CZE-UV was highly influenced by the biological sample components, which hindered a reliable quantification of both gadobenate and free ligand in serum and urine. In CZE-MS, on the other hand, the electrophoretic runs turned out to be independent of the clinical matrices, due to the informative potential and to the selectivity of MS detection.     

Determination of average degree of polymerisation and distribution of oligosaccharides in a partially acid-hydrolysed homopolysaccharide: a comparison of four experimental methods applied to mannuronan

The average degree of polymerisation (DP) and distribution of oligosaccharides in partially acid hydrolysed mannuronans were quantitatively evaluated by 1H NMR, electrospray ionisation mass spectrometry (ESI-MS), micellar electrokinetic capillary chromatography with UV detection (MEKC-UV), and high-pressure anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). Our investigation shows that 1H NMR, MEKC-UV and, in particular, HPAEC-PAD can be used as quantitative tools to aid the investigation of polysaccharide structure, function and synthesis. For the latter two techniques, especially, this represents a significant new development as it enables calculation of the quantity of individual oligomers of nominal DP by direct analysis of a defined oligomer mixture. Appropriate statistical averages of number and weight distributions were also calculated and found to fit very well to predicted Kuhn distributions that assume random depolymerisation.     

Sample preparation for metalloprotein analysis: A case study using horse chestnuts

In the present work, 11 different procedures for protein and metalloprotein extraction from horse chestnuts (Aescullus hippocastanum L.) in natura were tested. After each extraction, total protein was determined and, after protein separation through sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE), those metals belonging to the protein structure were mapped by synchrotron radiation X-ray fluorescence (SRXRF). After mapping the elements (Cr, Fe and Mn) in the protein bands (ca. 33 and 23.7 kDa), their concentrations were determined using atomic absorption spectrometry (ET AAS).

Good results were obtained for protein extraction using a combination of grinding and sonication. However, this strategy was not suitable to preserve metal ions in the protein structure. In fact, there was 42% decrease on Mn concentration using this procedure, compared to that performed with sample agitation in water (taken as reference). On the other hand, when grinding and agitation with an extracting buffer was used, there was a 530% increase of Mn concentration, when compared to the reference procedure.

These results indicate agreement between metal identification and determination in proteins as well as the great influence of the extraction procedure (i.e., the sample preparation step) for preserving metals in the protein structures.     

Testing for nandrolone metabolites in urine samples of professional athletes and sedentary subjects by GC/MS/MS analysis

The concentrations of nandrolone metabolites, 19-norandrosterone (19-NA) and 19-noretiocholanolone (19-NE) were analysed in urine samples of professional athletes doing intense physical activity and sedentary subjects to verify if there was endogenous production of nandrolone and if there was any link between physical effort and the urinary metabolites of the steroid. We collected 18 urine samples from professional footballers age range 20-30 years, all from the same team, and 18 urine samples from males not doing any physical activity, age range 20-30 years. Neither group used nandrolone. Qualitative and quantitative analyses of urinary nandrolone metabolites were carried out by GC/MS followed by GC/MS/MS to confirm positive samples. This technique has been demonstrated to be an excellent analytical approach for the determination of anabolic steroids at very low detection limits in complex matrices such as urine. In five urine samples from professional footballers traces of 19-NA were detected. No trace of 19-NA was found in the group of sedentary subjects and no trace of 19-NE was found in any urine sample. The absence of nandrolone metabolites in sedentary subjects supports the hypothesis that the presence of 19-NA and 19-NE could be linked to physical effort even though the origin is not yet clear.     

Electron traps on oxide surfaces: (H+)(e-) pairs stabilized on the surface of 17O enriched CaO.

(H+)(e-) pairs generated at the surface of polycrystalline CaO are analyzed for the first time in terms of the interaction of the unpaired electron spin with the nuclear spin of the 17O anions of the surface. CaO crystals enriched in the 17O isotope are prepared and the corresponding hyperfine coupling constants are measured in electron paramagentic resonance (EPR) spectra. The results are analyzed on the basis of cluster model density functional theory calculations. The computed hyperfine coupling constants for (H+)(e-) pairs formed on the edge, corner, and reverse corner sites of the CaO surface allow a tentative assignment of two observed spectral features to specific morphological surface sites.