Characterization of isolated homogeneous hypersurface singularities in ℂ4

Let V be a hypersurface with an isolated singularity at the origin in ? ⁿ⁺¹. It is a natural question to ask when V is defined by weighted homogeneous polynomial or homogeneous polynomial up to biholomorphic change of coordinates. In 1971, a beautiful theorem of Saito gives a necessary and sufficient condition for V to be defined by a weighted homogeneous polynomial. For a two-dimensional isolated hypersurface signularity V, Xu and Yau found a coordinate free characterization for V to be defined by a homogeneous polynomial. Recently Lin and Yau gave necessary and sufficient conditions for a 3-dimensional isolated hypersurface singularity with geometric genus bigger than zero to be defined by a homogeneous polynomial. The purpose of this paper is to prove that Lin-Yau’s theorem remains true for singularities with geometric genus equal to zero.     

Existence of black hole solutions for the Einstein-Yang/Mills equations

This paper provides a rigorous proof of the existence of an infinite number of black hole solutions to the Einstein-Yang/Mills equations with gauge groupSU(2), for any event horizon. It is also demonstrated that the ADM mass of each solutions is finite, and that the corresponding Einstein metric tends to the associated Schwarzschild metric at a rate 1/r ², asr tends to infinity.Research supported in part by the NSF, Contract No. DMS-89-05205Research supported in part by the DE, Contract No. De-FG 02-88 EF 25065     

Characterization of Metallo Bis(terpyridine) Diblock Polymers by Nonaqueous Capillary Zone Electrophoresis

A method of nonaqueous capillary zone electrophoresis (CZE) has been developed to characterize block (co)polymers of poly(ethylene oxide) and poly(styrene) containing metallo bis(terpyridine) complexes as bridging units. Specific CZE separation conditions had to be applied, with barium perchlorate dissolved in N-methylformamide (NMF) as background electrolyte and OV-1701-OH deactivated capillaries. For detection UV absorption was measured at a wavelength of 316 nm. Metallo diblock polymers with molecular weights up to 30,000 Da could be analyzed by the proposed nonaqueous CZE method. Experiments performed with polymeric compounds containing Fe, Ni or Ru as central metal ions showed that their electrophoretic mobilities were independent of the type of metal ion. Therefore, the data on the size of the polymeric compounds could be obtained using just one set of calibration standards. Polydispersities of the samples calculated from the experimental results were in correlation with the polydispersities of the polymers used in the synthesis of the metallo diblock polymers. Several polymeric samples contained metallo mono(terpyridine) complexes as impurities. These by-products could be separated from the main product. With symmetrical diblock polymers only one by-product was detected, while with an asymmetric diblock polymer two types of mono-complexes were found. The amount of the mono-complexes present as impurities was dependent on the type of central metal ion (Ni > Fe >> Ru).     

Hydrodynamical limit for a Hamiltonian system with weak noise

Starting from a general hamiltonian system with superstable pairwise potential, we construct a stochastic dynamics by adding a noise term which exchanges the momenta of nearby particles. We prolve that, in the scaling limit, the time conserved quantities, energy, momenta and density, satisfy the Euler equation of conservation laws up to a fixed timet provided that the Euler equation has a smooth solution with a given initial data up to timet. The strength of the noise term is chosen to be very small (but nonvanishing) so that it disappears in the scaling limit.Research partially supported by U.S. National Science Foundation grants DMS 89001682, DMS 920-1222 and a grant from ARO, DAAL03-92-G-0317Research partially supported by U.S. National Science Foundation grants DMS-9101196, DMS-9100383, and PHY-9019433-A01, Sloan Foundation Fellowship and David and Lucile Packard Foundation Fellowship     

Large deviations of interacting particle systems in infinite volume

We prove a large deviation theorem from the hydrodynamical limit for the empirical measure of Ginzburg-Landau and zero range processes in infinite volume starting from deterministic initial configurations. In the Ginzburg-Landau case the main tool is the study of the evolution of the H_?1 norm and in the zero range case the attractiveness which allows couplings.     

Transition of 3D to 2D growth modes of InAs grown on GaAs

We report a method to grow thin strain-released InAs layer on GaAs (1 0 0) substrates by molecular beam epitaxy. We have shown that by controlling the growth parameters, a thin 2D InAs layer can be grown during initial stages, which eventually serves as a buffer layer to trap dislocations and epitaxial regrowth of InAs on this buffer results in high crystal quality. The size dependence of the InAs islands formed during initial stages with growth time has been studied by atomic force microscopy. With continuous short-time epitaxial growth during various stages, the InAs growth mode transfers from 3D to 2D. The introduction of dislocations into InAs epitaxial islands and their behavior during initial growth stage has been theoretically studied. The theoretical results are in remarkable agreement with the experimental results and shows that once the film is formed, the film strain is totally relaxed. The 200 nm thick InAs epilayer grown on this buffer shows a narrow X-ray diffraction peak. Such InAs strain-released buffer layer would be useful for regrowth of high In content based materials on top of it for electronics and optoelectronics device applications.     

On the Point-Particle (Newtonian) Limit¶of the Non-Linear Hartree Equation

We consider the nonlinear Hartree equation describing the dynamics of weakly interacting non-relativistic Bosons. We show that a nonlinear M?ller wave operator describing the scattering of a soliton and a wave can be defined. We also consider the dynamics of a soliton in a slowly varying background potential W(ɛx). We prove that the soliton decomposes into a soliton plus a scattering wave (radiation) up to times of order ɛ⁻¹. To leading order, the center of the soliton follows the trajectory of a classical particle in the potential W(ɛx). Received: 30 June 2000 / Accepted: 25 June 2001     

Immiscibility,upper critical solution temperature,and miscibility in blends of poly(vinyl ether)s with polyacrylics: Effects of pendant groups

Various phase behavior of blends of poly(vinyl ether)s with homologous acrylic polymers (polymethacrylates or polyacrylates) were examined using differential scanning calorimetry, optical microscopy (OM), and Fourier‐transformed infrared spectroscopy. Effects of varying the pendant groups of either of constituent polymers on the phase behavior of the blends were analyzed. A series of interestingly different phase behavior in the blends has been revealed in that as the pendant group in the acrylic polymer series gets longer, polymethacrylate/poly(vinyl methyl ether) (PVME) blends exhibit immiscibility, upper critical solution temperature (UCST), and miscibility, respectively. This study found that the true phase behavior of poly(propyl methacrylate)/PVME [and poly(isopropyl methacrylate)/PVME)] blend systems, though immiscible at ambient, actually displayed a rare UCST upon heating to higher temperatures. Similarly, as the methyl pendant group in PVE is lengthened to ethyl (i.e., PVME replaced by PVEE), phase behavior of its blends with series of polymethacrylates or polyacrylates changes correspondingly. Analyses and quantitative comparisons on four series of blends of PVE/acrylic polymer were performed to thoroughly understand the effects of pendant groups in either polyethers (PVE's) or acrylic polymers on the phase behavior of the blends of these two constituents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1521–1534, 2007     

Multivariable identification and controller design of an integrated flight control system

This paper investigates the multivariable identification and controller design for the longitudinal channel of a Boeing 747 transport. The transfer function matrix of the system is identified using the prediction error (PE) identification method with multivariable ARX model. An ellipsoidal parametric uncertainty set is constructed from the covariance matrix of the identified parameters. It contains the parameters of actual system at a certain probability level. The identified models and the associated uncertainty sets are validated by measuring the worst-case ν-gap and then compared with the maximum value of the generalized stability margin. In automatic flight control system or autopilots, multiple specifications criteria are needed to be satisfied concurrently, such as good holding (small static altitude holding error), fast response, smooth transition (less oscillation, overshoot). The design of a Multiple Simultaneous Specifications (MSS) controller effectively and practically is a very significant and challenging job. Liu and Mills [H.H.T. Liu, J.K. Mills, Multiple specification design in flight control system, in: Proceedings of the American Control Conference, Chicago, Illinois, 2000, pp. 1365–1369] proposed a MSS controller design method using a convex combination approach. In this paper, we apply the method [H.H.T. Liu, J.K. Mills, Multiple specification design in flight control system, in: Proceedings of the American Control Conference, Chicago, Illinois, 2000, pp. 1365–1369; H.H.T. Liu, Design combination in integrated flight control, in: Proceedings of the American Control Conference, Arlington, Virginia, 2001, pp. 494–499; H.H.T. Liu, Multi-objective design for an integrated flight control system: a combination with model reduction approach, in: Proceedings of IEEE International Symposium on Computer Aided Control System Design, Glasgow, 2002, pp. 21–26] to design a MSS controller based on the identified models of the Boeing 747 transport aircraft longitudinal channel. The controllers are also validated by simulation using the true plant transfer functions.