Reconstruction of an acoustically sound-soft obstacle from one incident field and the far-field pattern

The problem considered is that of determining the shape of aplane acoustically sound-soft obstacle from the knowledge ofthe far-field pattern for one time-harmonic incident field.An iterative procedure is proposed based on two boundary integralsrepresenting the incident field and the far-field pattern, respectively.Numerical examples are included which show that the proceduregives accurate numerical approximations in relatively few iterations.     

Determination of myo-inositol in a flow-injection system with co-immobilized enzyme reactors and amperometric detection

A selective and sensitive flow-injection system for the determination of myo-inositol (hexahydroxycyclohexane) is described. Inositol dehydrogenase, IDH, lactate dehydrogenase, LDH, and lactate oxidase, LOD, are co-immobilized on porous glass and used in a packed-bed enzyme reactor. myo-Inositol reacts to produce an equivalent amount of hydrogen peroxide, which oxidizes hexacyanoferrate(II) to hexacyanoferrate(III) in a second reactor containing immobilized peroxidase. The hexacyanoferrate(III) is then detected amperometrically at 0 mV vs. SCE in a flow-through detector. The system responds linearly to injected samples of myo-inositol (25 μl) in the concentration range 1–300 μM. The maximum throughput was 90 samples per hour. The IDH/LDH/LOD reactor was stable for at least 5 weeks.     

Intramolecular dimers: a new design strategy for fluorescence-quenched probes

Fluorogenic probes dual-labeled with reporter and quencher dyes use a change in fluorescence to monitor biochemical events (e.g., substrate binding or enzyme digestion). Such events change the reporter-quencher distance, which affects fluorescence. Recently, it is has been shown that static quenching through intramolecular dimers is an important mechanism that can sometimes be more efficient than F?rster resonance energy transfer (FRET).     

CHROMOPHORE ROTATION IN 124-kD ALTON A vena sativa PHYTOCHROME AS MEASURED BY LIGHT-INDUCED CHANGES IN LINEAR DICHROISM

Abstract— From light-induced changes in linear dichroism, we have calculated the rotation of the long-wavelength-absorbing transition moment that occurs during phototransformation of 124-kilodalton Avena sativa phytochrome. Phytochrome was purified to homogeneity and immobilized onto Sepharose beads covalently coated with antibodies against A. sativa phytochrome. Changes in linear dichroism were induced by plane-polarized red or far-red light and measured by the absorbance differences at 660 and 730 nm using a dual-wavelength spectrophotometer equipped with polarizing filters in the measuring beams. From such measurements, we calculate a rotation angle of 31^o (or 149^o) during photoconversion of Pr to Pfr and 30^o (or 150^o) during photoconversion of Pfr to Pr. These values are similar to the value of 32^o (or 148^o) reported earlier for the rotation of the transition moment of "large" A. sativa phytochrome (∽ 120 kilodalton) isolated under conditions that did not preclude post homogenization proteolysis of the 124 kilodalton molecule.     

Studies of copper(II) sulphide ion-selective electrodes

Changes in liquid junction potentials in copper(II) solutions were measured when different reference electrodes were used. The slope and intercept of a calibration curve for a copper-selective electrode will depend on the selection of reference electrode. The condition of the electrode surface of an Orion copper-selective electrode was studied microscopically and the influence of redox potential on stability of the electrode against corrosion is discussed. Oxidizing solutions will produce pits at dislocations in the material and there will be a mixed electrode potential. The slope, stability, and speed of response are much lower when the surface contains pits. Diamond-polishing was shown to improve the electrode significantly.     

Four levels of pattern recognition

Problems of pattern recognition in chemistry and other subjects can be divided conveniently into four different types depending on the level of scope of the problem.(1) Classification into one of a number of defined classes. As an example blood samples taken from persons known to be either controls or welders are considered. The problem is whether trace element concentrations in these samples contain information on whether or not a person is a welder.(2) Level 1 plus the possibility that an object is an outlier, i.e. does not belong to any of the defined classes. As an example, the üse of ¹³C-n.m.r. data to decide whether 2-substituted norbornanes have the exo or endo structure is discussed. (2A) Level 2, asymmetric. This situation occurs when one class does not have a systematic structure, but another class is homogeneous and can be described by a level 2 model. This occurs in the classification of materials or compounds as good or bad, active or inactive, and in binary classifications. As an example the use of trace element data to classify steel samples as having good or poor properties of strength is discussed.(3) Level 2 plus the ability to relate the variables measured to external properties of continuous character. As an example, the classification of a series of chemical compounds as β -receptor blockers, β -receptor stimulants, or neither, on the basis of their structural variables is discussed. In addition, relations between these structural variables and the measured biological activity are sought within each of the two classes.(4) Level 3 with the difference that several external property variables in the objects are measured. It may be desirable to use variables of the objects both for classification and for relations to several property variables: such examples are numerous in analytical chemistry.     

Fourier transform infrared reflection-absorption spectroscopy of amino acids adsorbed on metal surfaces

Fourier transform infrared reflection-absorption spectroscopy (FT-IRAS) has been used to study the orientation and coordination of glycine, L-phenylalanine and L-histidine on gold and copper surfaces. It was found that glycine and L-histidine were weakly adsorbed (physisorbed) in the zwitterionic form on gold. The surface chemical bonding of L-histidine and L-phenylalanine to copper were chemical rather than physical by nature. Conclusive evidence was obtained for coordination to copper through both the amino-nitrogen and carboxylate-oxygen atoms.