Microwave and RF surface wave sustained discharges as plasma sources for plasma chemistry and plasma processing

The surface wave produced plasma belongs to a class of RF and microwave induced plasmas. It results from the propagation of an electromagnetic wave which uses the plasma column it sustains and the plasma tube as its sole propagating media. This type of plasma offers several advantages compared to the positive column plasma of dc discharges or to other RF and microwave produced plasmas. Surface wave plasmas require no internal electrodes, and they can be applied over an extremely broad range of wave frequencies (27 MHz to 10 GHz demonstrated) and gas pressures (about 10^–4 Torr to a few times the atmospheric pressures). Using the surface wave plasma technique, a large variety of plasma column diameters have been created (0.5–150 mm demonstrated) and no limitation on plasma column length (column up to 6 m long demonstrated) has been found. The surface wave produced plasma is used in elemental analysis and to sustain emission in lasing media. This article is intended as a guide for potential users of surface wave plasmas in the field of plasma processing and plasma chemistry.     

Structural and electrical changes in NdSrNiO4−δ by substitute nickel with copper

A novel series of the formula NdSrNi_1−xCu_xO_4−δ were synthesized for various values of x ranging from 0 to 1 in 1 atm of O₂ gas flow using conventional solid-state methods and were characterized by powder X-ray diffraction and electrical resistivity measurements. The compounds have been shown to adopt the K₂NiF₄-type structure. The oxygen stoichiometry of the compounds was determined from thermo-gravimetric analysis (TGA). An analysis of the micro-structure of the neodymium strontium nickel copper oxide is described. All the samples were semi-conducting from room temperature down to 77 K. The effect of Cu²⁺ incorporation on the structural and electrical properties of NdSrNi_1−xCu_xO_4−δ, 0?x?1, are discussed in terms of Jahn-Teller distortion of the (Ni/Cu)O₆ octahedra and mixed valence character of copper.     

Study of Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile for odorant biosensors

To make ultrathin films for the fabrication of artificial olfactory systems, odorant biosensors, we have investigated mixed Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile. Under optimized experimental conditions (phosphate buffer solution, pH 7.5, OBP-1F concentration of 4 mg L(-1), target pressure 35 mN m(-1)), the mixed monolayer at the air/water interface is very stable and has been efficiently transferred onto gold supports, which were previously functionalized by self-assembled monolayers (SAMs) with 1-octadecanethiol (ODT). Atomic force microscopy and electrochemical impedance spectroscopy were used to characterize mixed Langmuir-Blodgett (LB) films before and after contact with a specific odorant molecule, isoamyl acetate. AFM phase images show a higher contrast after contact with the odorant molecule due to the new structure of the OBP-1F/ODA LB film. Non-Faradaic electrochemical spectroscopy (EIS) is used to quantify the effect of the odorant based on the electrical properties of the OBP-1F/ODA LB film, as its resistance strongly decreases from 1.18 MOmega (before contact) to 25 kOmega (after contact).     

Functionalization of cellulose nanocrystal powder by non-thermal atmospheric-pressure plasmas

Cellulose - Despite promising characteristics such as the biodegradability and the environmentally benign nature of cellulose nanocrystal (CNC) based composites, their poor dispersion and...     

The martingale problem for a class of nonlocal operators of diagonal type

We consider systems of stochastic differential equations of the form $$\begin{array}{c}\hfill d{X}_t^i=\sum _{j=1}^d{A}_{ij}\left(X_{t?}\right)d{Z}_t^j\end{array}$$ for $i=1,?,d$ with continuous, bounded and non‐degenerate coefficients. Here $Z_t^1,?,Z_t^d$ are independent one‐dimensional stable processes with ${\alpha }_1,?,{\alpha }_d\in (0,2)$. In this article we research on uniqueness of weak solutions to such systems by studying the corresponding martingale problem. We prove the uniqueness of weak solutions in the case of diagonal coefficient matrices.     

Effect of process parameters on the mechanical properties of carbon nitride thin films synthesized by plasma assisted pulsed laser deposition

We present an investigation of the effect of the process parameters, namely deposition pressure and laser intensity, on the growth and mechanical properties of carbon nitride (CN_x) thin films synthesized by plasma assisted pulsed laser deposition. Deposition at high remote plasma pressure (200 mTorr) enhances both growth rate and nitrogen incorporation (up to 40 at.%), but nano-indentation measurements indicate that these films are very soft and have poor mechanical properties. At low remote plasma pressure (0.5 mTorr), the nitrogen content varies from 24 to 16 at.% with increasing laser intensity as the films become much harder and more elastic, with hardness and Youngs modulus values reaching 24 GPa and 230 GPa, respectively. These effects are explained in terms of a thermalization of the laser plasma at 200 mTorr and indicate that plasma activation of nitrogen does not provide any particular benefit to the film properties when deposition is performed at high pressure. However, at low pressure, the benefit of plasma activation is evidenced through enhanced nitrogen incorporation in the films while preserving the highly energetic species in the ablation plume. Such conditions lead to the synthesis, at room temperature, of hard and elastic films having properties close to those of fullerene-like CN_x. PACS 81.15.Fg; 81.05.Gc; 68.60.Bs     

Critical-point phase separation in laser ablation of conductors

Laser ablation due to an ultrashort laser pulse on a massive aluminum target was investigated by means of a one-dimensional fluid code. Clear separation between the ablated matter and the unablated target is seen to occur through spinodal decomposition involving thermodynamic instabilities near the critical point of aluminum. The code also shows that the end of the ablation process is preceded by the ejection of droplets, which form about 15% of the total ejected mass.     

Oxaliplatin preformulation studies for the development of innovative topical drug delivery systems

Journal of Thermal Analysis and Calorimetry - The objectives of this study were to verify the viability of the photoinitiating system using curcumin as a photoinitiator and glycerol as a...