Synthesis of nano-polycrystalline diamond from glassy carbon at pressures up to 25 GPa

ABSTRACT

Nano-polycrystalline diamond (NPD) with various grain sizes has been synthesized from glassy carbon at pressures 15–25?GPa and temperatures 1700–2300°C using multianvil apparatus. The minimum temperature for the synthesis of pure NPD, below which a small amount of compressed graphite was formed, significantly increased with pressure from ～1700°C at 15?GPa to ～1900°C at 25?GPa. The NPD having grain sizes less than ～50?nm was synthesized at temperatures below ～2000°C at 15?GPa and ～2300°C at 25?GPa, above which significant grain growth was observed. The grain size of NPD decreases with increasing pressure and decreasing temperature, and the pure NPD with grain sizes less than 10?nm is obtained in a limited temperature range around 1800–2000°C, depending on pressure. The pure NPD from glassy carbon is highly transparent and exhibits a granular nano-texture, whose grain size is tunable by selecting adequate pressure and temperature conditions.     

Characterization and determination of linear alkylbenzenesulfonates in environmental water samples by high-performance liquid chromatography with a hydrophilic polymer column and electrospray ionization mass spectrometric detection.

A liquid chromatography-mass spectrometry (LC/MS) method was developed for the separation and determination of linear alkylbenzenesulfonates (C10-C14 LAS) in environmental water samples using a hydrophilic polymer column (Shodex Mspak GF-310 4D). This method involves a solid-phase extraction of the LAS samples with a Sep-Pak PS-2 cartridge. The LAS components were separated on the column with a mobile phase of 29% (w/v) acetonitrile-water containing 0.8 mM di-n-butylammonium acetate and 0.2 M acetic acid, and were detected by mass spectrometry with electrospray ionization. Detection limits of the developed method based on selected ion monitoring (SIM) technique for the C10-C14 LAS standards were 13-47 ng L(-1). The concentrations of the C10-C14 LAS in the environmental water samples ranged between 5-317 microg L(-1) for a river water sample and 0.4-6.4 microg L(-1) for a seawater sample. Linear relationships between the logarithms of retention factors and the alkyl chain lengths for each phenyl positional isomer of LAS could successfully be used for the identification of the isomer peaks.     

Synthesis and properties of polydiene and polypentenamer having formyl or hydroxymethyl groups and their photosensitive derivatives

cis-1,4-Polybutadiene and polypentenamer having pendant functional groups such as formyl, aldoxime, hydroxymethyl, or cinnamoyloxymethyl groups have been prepared, and some of their properties were investigated in terms of structural effect on physical properties of these polymers. cis-1, 4-Polybutadiene and polypentenamer having a different content of formyl group were prepared by the hydroformylation reaction with rhodium catalyst under mild conditions. The pendant formyl group was reduced to a hydroxymethyl group by using various reducing agents such as sodium borohydride or sodium trimethoxyborohydride which were effective to avoid a crosslinking reaction among the formyl groups. Glass transition temperature of polypentenamer having hydroxymethyl groups increased with increasing the content of the hydroxymethyl groups in the polymer. Cinnamoyl group was introduced into the polypentenamer having hydroxymethyl groups by reacting with cinnamoyl chloride so as to prepare a photosensitive rubber. The relationships between the photosensitivity of the cinnamoylated polypentenamer and the mobility of polymer main chains have been elucidated. A linear relationship between the photodimerization rate constant and the difference between ultraviolet (UV) irradiation temperature and the glass transition temperature of the polymer was found. It has become apparent that the photosensitivity of cinnamoylated polypentenamer can be estimated by the glass transition temperature of the original polymer, UV irradiation temperature, activation energy of the dimerization, and γ, which is a coefficient of the relationship between the photosensitive group concentration and the glass transition temperature of the polymer.     

Synthesis and properties of 1,3,5-benzene periodic mesoporous organosilica (PMO): novel aromatic PMO with three point attachments and unique thermal transformations

A new aromatic periodic mesoporous organosilica material containing benzene functional groups that are symmetrically integrated with three silicon atoms in an organosilica mesoporous framework is reported. The material has a high surface area, well-ordered mesoporous structure and thermally stable framework aromatic groups. The functional aromatic moieties were observed to undergo sequential thermal transformation from a three to two and then to a one point attachment within the framework upon continuous thermolysis under air before eventually being converted to periodic mesoporous silica devoid of aromatic groups at high temperatures and longer pyrolysis times. The mesoporosity of the material was characterized by powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), and nitrogen porosimetry, whereas the presence and transformation of the aromatic groups in the walls of the materials were characterized by solid-state NMR spectroscopy, mass spectrometry, and thermogravimetric analysis. The attachment of a benzene ring symmetrically onto three siloxanes of the framework was used advantageously as a cross-linker to enhance the thermal stability of the organic group. Some of these properties are investigated in comparison with other aromatic PMOs that have only two point attachments and an amorphous phenylsilica gel that has only one point attachment. The successful synthesis of the first aromatic PMO with its organic group attached within the framework through more than two points is an important step toward the synthesis of PMOs having organic groups with more complex and multiple attachments within the framework.     

Oligothiophene-containing coumarin dyes for efficient dye-sensitized solar cells

We have developed oligothiophene-containing coumarin dyes fully functionalized for dye-sensitized nanocrystalline TiO(2) solar cells (DSSCs). DSSCs based on the dyes gave good performance in terms of incident photon-to-current conversion efficiency (IPCE) in the range of 400-800 nm. A solar energy-to-electricity conversion efficiency (eta) of 7.4% was obtained with a DSSC based on 2-cyano-3-[5'-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)-[2,2']bithiophenyl-5-yl]acrylic acid (NKX-2677) under simulated AM 1.5G irradiation (100 mW cm(-2)) with a mask: short-circuit current density (J(sc)) = 13.5 mA cm(-2); open-circuit voltage (V(oc)) = 0.71 V; fill factor (FF) = 0.77. Transient absorption spectroscopy measurements indicated that electron injection from NKX-2677 to the conduction band of TiO(2) is very rapid (<100 fs), which is much faster than the emission lifetime of the dye (1.0 ns), giving a highly efficient electron injection yield of near unity.     

Electrochemical characterization of negative electrodes consisting of surface-modified Zr0.9Ti0.1(Ni1.1Co0.1Mn0.5V0.2Cr0.1)x Laves-phase alloys

Laves-phase hydrogen storage alloy has a high potential for use as negative electrode material as alternative for the misch-metal-based material. In order to improve the energy density and the rate capability of negative electrode, chemical and mechanical modification of Lavesphase alloy with different stoichiometric ratios was carried out. Discharge capacity and high-rate dischargeabilty was evaluated by electrochemical methods and the characterization of Laves-phase alloy was made by X-ray diffraction, SEM observation and PCT measurement. The best result in discharge capacity could be obtained for stoichiometric Laves-phase alloy with a composition of Zr_0.9Ti_0.1Ni_1.1Co_0.1Mn_0.5V_0.2Cr_0.1 by boiling in 10 M KOH solution. On the other hand, the high-rate dischargeability was increased remarkably by introducing mechanical grinding before alkali treatment. The cause for improved performance was discussed on the basis of thermodynamic stability of metal hydride and changes in crystal structure and surface morphology influencing on diffusion coefficient and diffusion path length of hydrogen.     

Solubilization of oleyl alcohol by pure and mixtures of surfactants

The solubilization behavior of oleyl alcohol by pure and mixtures of surfactants systems have been studied in terms of the maximum additive concentration (MAC), the solubilizing power, and the particle sizes of micelles with or without oleyl alcohol. The surfactants used are amphoteric (N,N-dimethyl-N-lauroyl lysine, DMLL; N,N,N-trimethyl-N-lauroyl lysine, TMLL; N,N-dimethyl-N-(carboxymethyl)-lauryl ammonium, DMCL), anionic (sodium dodecyl sulfate, SDS) and nonionic (alkyl polyoxyethylene ethers).The maximum additive concentration of oleyl alcohol by pure surfactants is larger by nonionic surfactants than by others.For a nonionic surfactant system mixed with DMLL, the mixing effect of surfactant on the increase in the MAC is not recognized. While, for DMLL mixed with SDS, the MAC becomes larger than that by pure surfactants. This may be attributed to the fact that the large micellar size will result in increasing the maximum additive concentration.     

Photophysical and (photo)electrochemical properties of a coumarin dye

A new coumarin dye, cyano-{5,5-dimethyl-3-[2-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)vinyl]cyclohex-2-enylidene}-acetic acid (NKX-2753), was prepared and characterized with respect to photophysical and electrochemical properties. It was employed as a dye sensitizer in dye-sensitized solar cells and showed efficient photon-to-electron conversion properties. The photocurrent action spectrum exhibited a broad feature with a maximum incident photon-to-electron conversion efficiency (IPCE) of 84% at 540 nm, which is comparable to that for the famous red dye RuL2(NCS)2 (known as N3), where L stands for 2,2'-bipyridyl-4,4'-dicarboxylic acid. The sandwich-type solar cell with NKX-2753, under illumination of full sun (AM1.5, 100 mW cm(-2)), produced 16.1 mA cm(-2) of short-circuit photocurrent, 0.60 V of open-circuit photovoltage, and 0.69 of fill factor, corresponding to 6.7% of overall energy conversion efficiency using 0.1 M LiI, 0.05 M I2, 0.1 M guanidinium thiocyanate, and 0.6 M 1,2-dimethyl-3-n-propyl-imidazolium iodide in dry acetonitrile as redox electrolyte. In comparison with its analogue NKX-2586 (Langmuir 2004, 20, 4205), NKX-2753 with an extra side ring on the alkene chain produced much higher IPCE values at the same conditions. The side ring acted as a spacer to efficiently prevent dye aggregation when adsorbed on the TiO2 surface, resulting in significant improvements of short-circuit photocurrent, open-circuit photovoltage, and fill factor compared with NKX-2586 that aggregated on the TiO2 surface.     

Carbamoylimidazolium and thiocarbamoylimidazolium salts: novel reagents for the synthesis of ureas, thioureas, carbamates, thiocarbamates and amides

Carbamoylimidazolium salts act as efficient N,N-disubstituted carbamoylating reagents. These salts are readily prepared by the sequential treatment of secondary amines with N,N′-carbonyldiimidazole (CDI) and iodomethane. The carbamoylimidazolium salts are more efficient carbamoyl transfer reagents than the intermediate carbamoylimidazoles, as a result of the ‘imidazolium’ effect. Kinetic studies on the base promoted hydrolysis of both carbamoylimidazoles and carbamoylimidazolium salts reveal over a hundred-fold rate acceleration. The salts react with amines, thiols, phenols/alcohols, and carboxylic acids in high yields, without the need for subsequent chromatographic purification of the products, producing ureas, thiocarbamates, carbamates, and amides, respectively. Analogous thiocarbamoylimidazolium salts were also synthesized from secondary amines and N,N′-thiocarbonyldiimidazole (TCDI), followed by methylation with iodomethane.     

Template-directed DNA photoligation via alpha-5-cyanovinyldeoxyuridine

[reaction: see text] We describe an efficient template-directed photoligation of oligodeoxynucleotides (ODNs) using alpha-5-cyanovinyldeoxyuridine (alpha(C)U). An efficient photoligation was produced by photoirradiation of an ODN containing alpha(C)U at the 3' end with an ODN containing thymine at the 5' end in the presence of a template ODN. This photoligation method is a new and efficient way to synthesize branched ODNs.